Generic Replacement Parts Conga 2499 Ultra Home Advanced, Atvel R80 Base, 7690 Immortal Max Home, Titanium X-Treme

Contents

Instruction Manual: Replacement Parts for Robotic Vacuum Cleaners

Compatible with Conga 2499 Ultra Home Advanced, Atvel R80 Base, 7690 Immortal Max Home, and Titanium X-Treme

1. Introduction and Package Contents

This manual provides instructions for the installation and maintenance of replacement parts for various robotic vacuum cleaner models. Regular replacement of these parts ensures optimal performance and extends the lifespan of your vacuum cleaner.

What's Included:

  • 2 x Roller Brushes
  • 10 x Side Brushes
  • 10 x HEPA Filters
  • 10 x Mop Cloths
  • 10 x Dust Bags
Complete set of replacement parts for robotic vacuum cleaners

Figure 1: Complete set of replacement parts including roller brushes, side brushes, HEPA filters, mop cloths, and dust bags.

2. Setup and Installation

Before installing any new parts, ensure your robotic vacuum cleaner is turned off and unplugged from its charging base. Refer to your vacuum cleaner's original manual for specific instructions on accessing component compartments.

2.1. Roller Brush Installation

Locate the main brush compartment, usually on the underside of the vacuum. Open the cover, remove the old roller brush, and insert the new roller brush, ensuring it clicks securely into place. Close the cover.

Close-up of a roller brush

Figure 2: A roller brush with bristles and rubber treads, ready for installation.

2.2. Side Brush Installation

Turn the vacuum cleaner over. The side brushes are typically held in place by a screw or a snap-on mechanism. Unscrew or unclip the old side brush, then align the new side brush and secure it. Ensure the brush arms are not bent during installation.

Close-up of a side brush

Figure 3: A three-armed side brush, designed for effective edge cleaning.

2.3. HEPA Filter Installation

Open the dustbin compartment and remove the dustbin. The HEPA filter is usually located within the dustbin. Remove the old filter and insert the new HEPA filter, ensuring it sits flush to maintain proper sealing. Reinsert the dustbin.

Close-up of a HEPA filter

Figure 4: A pleated HEPA filter, crucial for capturing fine dust and allergens.

2.4. Mop Cloth Installation

If your vacuum cleaner has a mopping function, attach a new mop cloth to the designated mop pad or water tank module. Ensure it is securely fastened, typically with Velcro or a sliding mechanism.

Close-up of a mop cloth

Figure 5: A textured mop cloth for wet cleaning functions.

2.5. Dust Bag Installation

For models with an auto-empty station or internal dust bag, open the dust bag compartment. Remove the full dust bag and carefully insert a new one, ensuring the opening aligns correctly with the vacuum's suction port. Close the compartment.

Close-up of a dust bag

Figure 6: A dust bag for collecting debris in compatible vacuum models.

3. Operating with New Parts

Once all replacement parts are installed, you can resume normal operation of your robotic vacuum cleaner. The new parts are designed to restore or enhance cleaning performance.

  • Side Brushes: These brushes are crucial for reaching dirt and debris in corners and along edges, ensuring a more thorough clean.
  • HEPA Filters: The new HEPA filters will effectively capture fine dust, pollen, and other allergens, improving air quality in your home.
  • Roller Brushes: The uniquely designed roller brushes with rubber treads are optimized to adapt to various floor surfaces, efficiently removing everything from small dust particles to larger debris.
  • Mop Cloths: Fresh mop cloths ensure effective wet cleaning and streak-free floors.
  • Dust Bags: New dust bags provide maximum capacity for debris collection, reducing the frequency of emptying.

4. Maintenance and Replacement Schedule

To maintain your robotic vacuum cleaner's best performance, adhere to the following replacement schedule:

PartRecommended Replacement FrequencyMaintenance Tips
Roller BrushesEvery 2-3 monthsRegularly check for tangled hair or debris and remove them.
Side BrushesEvery 2-3 monthsInspect for wear and tear; clean off any accumulated hair or string.
HEPA FiltersEvery 2-3 monthsTap gently to remove dust. Do not wash unless specified by your vacuum's manufacturer.
Mop ClothsAfter each use (washable), replace as neededWash thoroughly after each mopping session. Replace if heavily stained or worn.
Dust BagsWhen full or every 2-3 monthsReplace promptly when the vacuum indicates the bag is full or suction decreases.

Note: The replacement frequency may vary depending on usage intensity and household environment (e.g., pets, high traffic).

5. Troubleshooting

  • Reduced Cleaning Performance: Ensure all parts are installed correctly and securely. Check for any blockages in the roller brush or suction path. Replace parts if they are visibly worn or damaged.
  • Unusual Noises: Verify that the roller brush and side brushes are free from tangled hair or debris. Ensure they are properly seated and not rubbing against other components.
  • Poor Suction: Check if the dust bag is full and replace it if necessary. Ensure the HEPA filter is clean and correctly installed.
  • Mop Function Issues: Ensure the mop cloth is clean and properly attached. Check the water tank (if applicable) for sufficient water.

If issues persist after checking these points, consult your vacuum cleaner's original user manual or contact the vacuum cleaner manufacturer's support.

6. Specifications

FeatureDetail
MaterialPlastic
OriginMainland China
Package WeightApproximately 0.638 kg
Package Dimensions (L x W x H)20 cm x 15 cm x 10 cm
CompatibilityConga 2499 Ultra Home Advanced, Atvel R80 Base, 7690 Immortal Max Home, Titanium X-Treme

7. User Tips

  • Verify Compatibility: Always double-check the model numbers of your robotic vacuum cleaner against the listed compatible models before purchasing replacement parts to ensure a perfect fit.
  • Regular Inspection: Periodically inspect all brushes and filters for wear, damage, or excessive debris buildup, even if not yet due for replacement. This can help prevent performance issues.
  • Proper Disposal: Dispose of old filters and dust bags responsibly according to local waste disposal guidelines.

8. Warranty and Support

These replacement parts are designed for durability and performance. For any questions regarding the installation or function of these parts, please contact the seller or refer to the support resources provided by your robotic vacuum cleaner's manufacturer.

Please note that this manual covers the replacement parts only. For issues related to the robotic vacuum cleaner itself, consult its original manufacturer's documentation or support channels.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.