1. Introduction
Thank you for choosing the NEWBOLER LIG003 Bicycle Front Light. This high-performance light is designed to enhance your cycling safety and visibility with its powerful illumination and robust features. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your device.

2. Safety Instructions
- Do not look directly into the light beam when it is on, as it can cause temporary vision impairment.
- Keep the device away from children.
- Ensure the light is securely mounted to your bicycle handlebar before riding.
- Do not disassemble or attempt to repair the light yourself. Contact customer support for assistance.
- Use only the provided or recommended charging cable to prevent damage to the battery.
- While the light is waterproof for daily use (IPX6 rated), avoid prolonged immersion in water.
3. Package Contents
Please check the package for the following items:
- NEWBOLER LIG003 Bicycle Front Light
- USB-C Charging Cable
- Mounting Brackets (Normal and/or Extend, depending on package)
- User Manual (this document)
4. Specifications

| Feature | Specification |
|---|---|
| Model | LIG003 |
| Material | Aluminum Alloy |
| Lumens | Max 4500LM |
| Battery Capacity | 14000mAh (26800 type * 2) |
| Charging Type | USB-C |
| Charging Time | Approx. 8 hours |
| Working Hours | 9-13.5 hours (depending on mode) |
| Light Modes | 4 modes (Floodlight, Spotlight, High Light, Flash) |
| Waterproof Level | IPX6 |
| Lamp Bead Type | P9 |
| Weight | 459g |
| Dimensions | 18.2cm (L) x 5.1cm (W) x 3.2cm (H) |
| Mounting Placement | Handlebar |
| Certification | CE |

5. Setup and Installation
The NEWBOLER LIG003 offers two types of installation brackets: Normal and Extend. Follow the steps below for secure mounting.

5.1. Installation Steps (Normal Bracket)
- Step 1: Put the base over the handlebar. Place spacers as needed to ensure a snug fit.
- Step 2: Adjust the position and tighten the base screws.
- Step 3: Install the second bracket in the same way, ensuring both are aligned.
- Step 4: Push the lamp into place on the base. Tighten the screws to fixate the light securely.

5.2. Alternative Installation Steps
- Step 1: Put the bracket into the corresponding position on the bicycle handlebar.
- Step 2: Insert the screw and manually tighten it.
- Step 3: Install another bracket in the same way, ensuring proper spacing.
- Step 4: Slide the bottom of the bicycle light into the bracket along the slide rail.
- Step 5: Tighten the bottom screw to secure the light.
- Step 6: Installation completed.


6. Operating Instructions
6.1. Power On/Off
Press and hold the power button (located on the side) for a few seconds to turn the light on or off.
6.2. Changing Light Modes
Once the light is on, short press the light mode button (next to the power button) to cycle through the 4 available modes:
- Floodlight: Wide beam for general illumination. (Approx. 10.5 hours runtime)
- Spotlight: Focused beam for long-distance visibility. (Approx. 10.5 hours runtime)
- High Light: Combination of floodlight and spotlight for maximum brightness. (Approx. 9 hours runtime)
- Flash: Pulsating light for increased visibility in traffic. (Approx. 13.5 hours runtime)


6.3. Battery Display
The integrated data display shows the current battery power level (0-100) and the remaining runtime in the current mode.
6.4. Charging the Light
Connect the provided USB-C cable to the charging port on the light and to a suitable USB power source (e.g., wall adapter, computer USB port). The display will indicate charging status. A full charge takes approximately 8 hours.
6.5. Power Bank Function (Reverse Charging)
The LIG003 can also function as a power bank. Connect your smartphone or other USB-C compatible device to the light's USB-C port using a suitable cable to charge it. The light's display will show the battery power being used.

7. Maintenance and Care
- Cleaning: Wipe the light with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the light in a cool, dry place when not in use. If storing for an extended period, charge the battery to about 50-70% every 3-6 months to maintain battery health.
- Waterproofing: The aluminum alloy body provides IPX6 waterproofing for daily use and resistance to rain. However, it is not designed for submersion. Avoid soaking it in water for a long time.
- Impact Resistance: The strong aluminum alloy shell is designed to be compression and drop resistant, protecting against bumps in daily use.


8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | Low battery; Power button not pressed long enough | Charge the light fully; Press and hold the power button for 3 seconds. |
| Light turns off unexpectedly | Low battery; Overheating | Recharge the light; Allow the light to cool down before resuming use. |
| Cannot change modes | Mode button not pressed correctly | Ensure the light is on, then short press the mode button. |
| Charging is slow or not working | Faulty cable/adapter; Dirty charging port | Try a different USB-C cable and power adapter; Clean the charging port gently. |
| Light feels loose on handlebar | Mounting screws not tight enough; Incorrect bracket size/spacers | Retighten all mounting screws; Ensure correct spacers are used for your handlebar diameter. |
9. User Tips
- For optimal battery life, avoid completely draining the battery frequently.
- Utilize the power bank feature for emergency charging of your phone during long rides.
- Adjust the light angle to avoid blinding oncoming cyclists or pedestrians.
- Consider using the flash mode during daylight hours for enhanced visibility to motorists.
10. Warranty and Support
The NEWBOLER LIG003 Bicycle Front Light comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms, please refer to the product packaging or contact your retailer.
If you encounter any issues or have questions regarding your product, please contact NEWBOLER customer support through the retailer's platform or the official NEWBOLER website.