1. Introduction
Thank you for choosing the iScooter W3 City Commuter Electric Scooter. This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your new scooter. Please read it thoroughly before your first ride and keep it for future reference.
2. Important Safety Warnings
⚠ Please read all safety instructions carefully before operating the scooter.
- Always wear a helmet and other protective gear (knee pads, elbow pads) while riding.
- Comply with all local traffic laws and regulations regarding electric scooters.
- Do not ride in heavy rain, on icy surfaces, or through puddles deeper than 2 cm.
- Avoid riding on uneven terrain, steep slopes, or over obstacles that could cause loss of control.
- Ensure the scooter is fully assembled and all locks are secure before riding.
- Do not allow children under the age of 16 to ride the scooter.
- Do not exceed the maximum load capacity of 100 kg (220 lbs).
- Be aware of your surroundings and other road users.
- **Fire Risk Warning:** Please mind potential fire risk and strictly follow the instruction manual for charging and storage.
3. Package Contents
Verify that all items are present in your package:
- W3 Electric Scooter (partially assembled)
- T-wrench (1)
- Charger (1)
- Instruction Manual (1)
- Inner Tube (1)
- Flat Head Screws (6)
- Extension Tube (1)
4. Assembly and Initial Setup
Your W3 scooter comes partially assembled. Follow these steps to complete the setup:
- **Unfold the Stem:** Carefully lift the handlebar stem into the upright riding position.
- **Secure the Folding Lock:** Close the folding lock mechanism firmly until you hear a distinct click, ensuring the stem is securely locked in place.
- **Install the Handlebar:** Attach the handlebar to the stem. Use the provided flat head screws (6) and T-wrench to pre-tighten and then securely fasten the handlebar. Ensure all bolts are tight before use.
- **Initial Charge:** Before your first ride, fully charge the scooter's battery. Refer to the "Charging the Battery" section for detailed instructions.
5. Charging the Battery
The W3 Electric Scooter is equipped with a 36V 7.8Ah lithium battery. Proper charging ensures optimal performance and battery longevity.
- **Charger Specifications:** Input: AC100-240V 50/60Hz, Output: 42V. Use only the original charger provided.
- **Charging Port:** Locate the charging port on the scooter (refer to the product details diagram in Section 6.1).
- **Charging Process:**
- Ensure the scooter is powered off.
- Connect the charger to the charging port on the scooter.
- Plug the charger into a standard wall outlet.
- The indicator light on the charger will typically show red during charging and turn green when fully charged.
- **Charging Time:** A full charge typically takes 5-6 hours.
- **Safety Precautions:**
- Do not charge unattended.
- Charge in a dry, well-ventilated area, away from flammable materials.
- Do not cover the charger during use.
- Disconnect the charger once charging is complete.
6. Operation
6.1 Controls and Display
The W3 scooter features an intuitive control layout and a clear LED display.
- **LCD Display:** Provides real-time information including current speed, battery level, and selected gear mode.
- **Power Button:** Press and hold to power on/off. Short press to toggle headlights.
- **Accelerator:** Located on the right handlebar, press down to accelerate.
- **Brake Lever:** Located on the left handlebar, squeeze to activate the rear drum brake and electronic brake.
- **Bell:** Use to alert pedestrians and other riders.
- **Headlight:** Integrated into the front of the handlebar for visibility.
- **Brake Light:** Located on the rear fender, illuminates when braking.
6.2 Riding Instructions
- **Power On:** Press and hold the power button until the display lights up.
- **Select Speed Mode:** Short press the power button (or a dedicated mode button if available) to cycle through the speed gears.
- **Standard Speed Modes:** 6 km/h, 15 km/h, 25 km/h (3 gears).
- **Unlocked Speed Modes (after modification):** 6 km/h, 10 km/h, 20 km/h, 30 km/h (4 gears).
- **Start Riding:** Place one foot on the deck and push off with the other foot to gain some initial momentum. Once moving, gently press the accelerator.
- **Braking:** Release the accelerator and gently squeeze the brake lever on the left handlebar to slow down or stop. The rear brake light will activate.
- **Turning:** Lean slightly in the direction you wish to turn and gently steer the handlebars.
- **Lighting:** Short press the power button to turn the front headlight on or off for improved visibility.
7. Folding and Storage
The W3 scooter features a quick one-step folding design for easy portability and storage.
- **Prepare for Folding:** Ensure the scooter is powered off.
- **Initiate Fold:** Locate the folding mechanism (refer to the product details diagram in Section 6.1) and release the lock.
- **Fold Down:** Gently push the handlebar stem downwards until it locks into the folded position.
- **Secure:** Ensure the stem is securely latched to the rear fender hook.
Once folded, the scooter dimensions are approximately 1050mm (length) x 450mm (width) x 490mm (height), and it weighs 10.4 kg (Net Weight), making it easy to carry or store in compact spaces.
8. Maintenance
Regular maintenance will extend the life and performance of your W3 scooter.
- **Cleaning:** Wipe the scooter with a damp cloth. Do not use high-pressure water jets or immerse the scooter in water.
- **Tires:** The 8.5-inch pneumatic tires require regular pressure checks. Maintain recommended tire pressure for optimal ride quality and range.
- **Brakes:** Periodically check the brake lever and drum brake for proper function and wear. Adjust or replace components as needed.
- **Battery Care:**
- Charge the battery regularly, even if not in use, to maintain its health.
- Avoid completely draining the battery.
- Store the scooter in a cool, dry place when not in use for extended periods, with the battery charged to about 50-70%.
- **Fasteners:** Periodically check all screws and bolts, especially on the handlebar and folding mechanism, to ensure they are tight.
9. Troubleshooting
Here are some common issues and their potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Scooter does not power on | Low battery; loose connections; power button malfunction | Charge the battery; check all visible connections; contact support if issue persists. |
| Reduced range or power | Low tire pressure; battery degradation; riding uphill frequently | Check and inflate tires; ensure full charge; consider riding habits. |
| Brakes feel weak | Brake cable needs adjustment; worn brake pads | Adjust brake cable tension; inspect and replace brake pads if worn. |
| Display not working correctly | Loose connection; software glitch | Power cycle the scooter; check connections; contact support. |
| Scooter is limited to 25 km/h | Default factory setting or local regulations | This is often a default setting for compliance. Some models allow for an "unlocked" mode (up to 30 km/h) via specific procedures or firmware updates, often referred to as a "hack". Consult online communities or seller for details, but be aware of local laws. |
10. Specifications
Detailed technical specifications for the iScooter W3 Electric Scooter:
| Feature | Specification |
|---|---|
| Model | W3 |
| Expanded Size | 1050 x 450 x 1100 mm |
| Folded Size | 1050 x 450 x 490 mm |
| Net Weight | 10.4 KG |
| Gross Weight | 12.5 KG |
| Battery Capacity | 36V 7.8Ah |
| Motor Power | 350W |
| Wheel Diameter | 8.5 Inches |
| Range By Charge | 24-34 KM |
| Maximum Load Capacity | 100 KG (220 LBS) |
| Working Temperature | -2℃ ~ 35℃ |
| Charger Input | AC100-240V 50/60Hz |
| Charger Output | 42V |
| Charging Time | 5-6 Hours |
| Max Speed | 30 KM/H |
| Standard Speed Modes | 6 / 15 / 25 km/h (3 gears) |
| Unlocked Speed Modes | 6 / 10 / 20 / 30 km/h (4 gears after hack) |
| Tires | Pneumatic (inner & outer) road tires |
| Rear Braking | Drum brake |
| Hidden Braking | Electronic brake |
| Applicable People | Unisex |
| Certification | CE |
| Category | Two-wheel Scooter |
| Type | City commuter electric scooter |
| Folded | Yes |
11. User Tips
- **Speed Customization:** The scooter offers "unlocked" speed modes (up to 30 km/h) which can be accessed after a specific procedure, sometimes referred to as a "hack." Be aware that modifying speed settings may affect warranty and local legal compliance. Always check local regulations before adjusting speed limits.
- **Protective Gear:** Always prioritize safety. Wearing a helmet and other protective gear is crucial for preventing injuries.
- **Tire Maintenance:** Regularly check tire pressure. Proper inflation significantly impacts ride comfort, range, and tire longevity.
- **App Connectivity:** While some scooters offer app integration, the provided information does not specify an official app for the W3 model. If an app is desired, check with the seller or manufacturer for compatible options.
12. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty claims.
**Manufacturer:** iScooter
**Contact Information:** Please refer to the contact details provided at the point of purchase or on the official iScooter website for the most up-to-date support channels.
13. Product Overview Video
Watch this video for a visual guide on the W3 Electric Scooter's features, folding mechanism, and general usage.
