1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your LIVIAE Smart Central Display Screen. This display is designed for electric scooters, offering advanced control and security features including NFC card and password unlock capabilities. It is specifically compatible with LIVIAE controllers.
2. Setup
2.1 Unboxing and Inspection
Carefully remove all components from the packaging. Verify that all items listed in the package contents are present and undamaged. If any items are missing or damaged, please contact your seller immediately.
2.2 Installation
- Mount the display securely on your electric scooter's handlebars using the provided brackets. Ensure it is positioned for optimal visibility and accessibility.
- Connect the display's main cable to the corresponding port on your LIVIAE controller. Refer to your scooter's wiring diagram for specific connection points.
- Ensure all connections are firm and secure to prevent accidental disconnections during operation.
3. Operating Instructions
The LIVIAE Smart Central Display offers intuitive controls for various scooter functions.
3.1 Power On/Off and Unlocking
- Power On: Short press the first button on the left (Power button) to activate the display.
- Unlocking with NFC Card: After powering on, hold an NFC unlock card (Figure 5) near the NFC sensor on the display to unlock the scooter.
- Unlocking with Password: After powering on, long press the first button on the left (Power button) to enter password unlock mode. Follow the on-screen prompts to enter your password.
- Power Off: Long press the first button on the left (Power button) to turn off the display and scooter.
3.2 Riding Modes and Gears
- Riding Modes: The second button from the left is used to switch between three driving modes: COMFORT, SPORT, and ECO PRO.
- Gear Switching: The last button on the right is used to switch gears.
3.3 Motor Control
The fourth button from the left (labeled F/B 4) is used for switching between motor configurations: front motor only, rear motor only, or both front and rear motors.
3.4 Lights and Horn
On the left handlebar, you will find controls for the headlight, RGB light, turn signals, and horn.
3.5 Throttle and Assistant Button
The right handlebar features the twist throttle for acceleration and an assistant button for additional functions.
3.6 Advanced Features
- Energy Regeneration: Adjustable from 0-10 levels.
- Energy Output: Adjustable from 0%-100%.
- Pushing Mode: A convenient mode for moving the scooter when not riding, especially useful for flat tires.
- Cruising: Activate cruising function for maintaining a constant speed.
- APP and Bluetooth Connectivity: Connect the display to your mobile phone via Bluetooth and use the dedicated APP for additional controls and data.
4. Maintenance
To ensure the longevity and optimal performance of your LIVIAE Smart Central Display Screen, follow these maintenance guidelines:
- Cleaning: Use a soft, damp cloth to wipe the display screen. Avoid abrasive cleaners or solvents that could damage the screen surface.
- Protection: Keep the display away from direct sunlight for prolonged periods and protect it from extreme temperatures and moisture.
- Connections: Periodically check all cable connections to ensure they are secure and free from corrosion or damage.
- Software Updates: If available, regularly update the display's firmware via the mobile APP to benefit from new features and performance improvements.
5. Troubleshooting
If you encounter issues with your display, refer to the following common troubleshooting steps:
- Display Not Turning On:
- Check if the scooter's main power is on.
- Ensure all cables are securely connected to the display and controller.
- Verify the scooter's battery has sufficient charge.
- NFC Card Not Unlocking:
- Ensure the NFC card is placed correctly over the NFC sensor area.
- Try another registered NFC card if available.
- If using password unlock, ensure the correct password is entered.
- Incorrect Readings/Functions:
- Restart the display by turning the scooter off and on again.
- Check for any loose connections.
- If the issue persists, consider performing a factory reset (if available in the settings menu, consult the APP for details) or contact support.
- Bluetooth/APP Connectivity Issues:
- Ensure Bluetooth is enabled on your mobile device.
- Make sure the display is powered on and within range.
- Try restarting both the display and your mobile device.
- Reinstall the APP if necessary.
6. Specifications
| Feature | Specification |
|---|---|
| Item | Electric scooter screen |
| Type | NFC Electric scooter screen, Hand Tool Parts, Other |
| Usage | Electric Scooters |
| Suitable for | LIVIAE Controller scooter, electric scooters |
| Weight | 1kg |
| MOQ | 1 Set / 1pcs |
| Packing | Box |
| Colour | Black |
| Place of Origin | Jiangsu, China / Mainland China |
| Brand Name | Eshiner |
| Model Number | Liviae NFC display |
| Material | Plastic |
| Voltage | 72V, 48V, 60V |
| Motor Power | No (refers to display not having motor power) |
| Brake Type | NO (refers to display not having brake type) |
| Battery Type | No (refers to display not having battery type) |
| Bearing | No (refers to display not having bearing) |
| Application | Electric scooter |
| Feature | Easy install |
| Packing size | 20*20*10cm |
| Single package size | 20X15X10 cm |
7. User Tips
No specific user tips were available from provided reviews or Q&A. However, general tips for smart displays include:
- Familiarize yourself with all button functions before riding.
- Keep your NFC cards in a safe and accessible place.
- Regularly check for and install any available firmware updates for optimal performance and new features.
- Ensure your mobile phone's Bluetooth is on and the APP is running when you want to use its features.
8. Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your electric scooter or contact the seller directly. Ensure you have your purchase details and product model number ready when contacting support.
