1. Introduction
Thank you for choosing the Ginour 21V Brushless Cordless Impact Drill Set. This powerful and versatile tool is designed for a wide range of drilling, impact drilling, and screw driving tasks. Featuring a high-efficiency brushless motor, intelligent torque protection, and a robust design, it offers enhanced performance and durability for both DIY enthusiasts and professionals. Please read this manual carefully before use to ensure safe and optimal operation.
2. Safety Instructions
Always follow basic safety precautions when using power tools to reduce the risk of fire, electric shock, and personal injury.
- Work Area Safety: Keep your work area clean and well-lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Electrical Safety: Avoid body contact with earthed or grounded surfaces (e.g., pipes, radiators, ranges, refrigerators). Do not expose power tools to rain or wet conditions.
- Personal Safety: Always wear eye protection (safety glasses or goggles). Use hearing protection when operating for extended periods. Wear appropriate clothing; avoid loose clothing or jewelry. Secure long hair.
- Tool Use and Care: Do not force the power tool. Use the correct power tool for your application. Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
- Battery Safety: Use only the charger specified by the manufacturer. Do not charge batteries in damp or wet locations. Do not disassemble, open, or shred battery packs.
3. Package Contents
Your Ginour 21V Brushless Cordless Impact Drill Set typically includes:
- 1 x Ginour 21V Brushless Cordless Impact Drill
- 2 x 2.0Ah Lithium-ion Batteries
- 1 x Fast Charger
- User Manual
4. Specifications

Overview of the Ginour 21V Brushless Cordless Impact Drill features.
| Feature | Specification |
|---|---|
| Voltage | 21V |
| Motor Type | Brushless (800W) |
| Max Torque | 50 Nm |
| Speed Settings | 2 Variable Speeds |
| No-Load Speed (Low) | 0-450 RPM (Recommended for Impact Drilling) |
| No-Load Speed (High) | 0-1450 RPM (Recommended for Screw Driving) |
| Torque Stages | 23+3 (Drilling, Impact Drilling, Screw Driving) |
| Chuck Size | 3/8" (0.8-10mm) Quick-Release Chuck |
| Max Impact Rate | 18,000 min-1 |
| Battery Capacity | 2x 2.0Ah Lithium-ion |
| Battery Compatibility | Adaptable for Makita 18V Batteries |

Table showing recommended speed and torque settings, and maximum hole diameters for various materials.
| Function | Material | Speed Settings (1 & 2) | Torque Settings (1-23) | Max Hole Diameter (mm) - Drilling | Max Hole Diameter (mm) - Impact Drilling |
|---|---|---|---|---|---|
| Disassembly | Cork | 150 | 1-6 | 40 | \ |
| Wood | 100 | 6-10 | 30 | \ | |
| Plastic/Resin (PLA/ABS) | 30 | 10-17 | 20 | \ | |
| Steel | 20 | 17-23 | 10 | \ | |
| Aluminum, Brass, etc. | 20 | 15-23 | 10 | \ | |
| Glass | \ | 10-17 | 20 | \ | |
| Shell, Stone | \ | 17-23 | 10 | 10 | |
| Ceramic | \ | 10-17 | 20 | \ | |
| Concrete | \ | 17-23 | 10 | 10 |
5. Setup
5.1 Charging the Battery
Ensure the battery is fully charged before first use. Connect the charger to a power outlet and insert the battery pack. The charger indicator will show the charging status. Once fully charged, remove the battery from the charger.

The 21V 2.0Ah battery provides extended runtime and stable performance.
5.2 Installing/Removing the Battery Pack
- Installation: Align the battery pack with the slot in the drill handle and slide it in until it clicks into place.
- Removal: Press the battery release button (if present) and slide the battery pack out of the handle.
5.3 Installing/Removing Drill Bits

Step-by-step guide for installing a drill bit into the quick-release chuck.
- Loosen Quick-Release Chuck: Rotate the chuck counter-clockwise to open the jaws.
- Insert Bit: Insert the desired drill bit or screwdriver bit into the chuck jaws.
- Grip Chuck: Rotate the chuck clockwise to securely tighten the jaws around the bit. Ensure the bit is centered and firmly held.
- Set Torque Levels: Adjust the torque collar to the desired setting for your application (see Operating Instructions).

The 3/8" (0.8-10mm) quick-release chuck allows for fast accessory changes and features a safety lock.
6. Operating Instructions
6.1 Powering On/Off and Variable Speed Control

The variable speed trigger allows for precise control over the drill's rotation speed.
The drill is activated by pressing the trigger switch. The speed is variable; the further the trigger is pressed, the faster the drill rotates. Release the trigger to turn off the tool.
6.2 Mode Selection (3-in-1 System)

The versatile 3-in-1 system adapts to various tasks: Impact Drilling (max depth 40mm), Drilling, and Screw Driving.
Rotate the mode selector ring to choose between the three main functions:
- Impact Drilling Mode: For drilling into hard materials like brick, masonry, and concrete.
- Drilling Mode: For drilling into wood, metal, plastic, etc.
- Screw Driving Mode: For driving and removing screws.
6.3 Torque Setting Adjustment

The 23+3 torque settings provide precise control and flexibility for different materials like plastic, wood, metal, brick, and cement.
The torque collar allows you to adjust the amount of rotational force. There are 23 torque settings for screw driving, plus dedicated settings for drilling and impact drilling. Select a lower torque setting for smaller screws or softer materials to prevent over-driving or damaging the workpiece. Use higher settings for larger screws or harder materials.
6.4 Speed Gear Selection

The drill features two variable speed gears: 0-450 RPM for impact drilling and 0-1450 RPM for screw driving.
Use the gear selector switch on top of the drill to choose between two speed ranges:
- Gear 1 (Low Speed, High Torque): Ideal for impact drilling and driving large screws. (0-450 RPM)
- Gear 2 (High Speed, Low Torque): Suitable for drilling and driving smaller screws. (0-1450 RPM)
6.5 Forward/Reverse Rotation and Safety Lock

The directional switch controls forward (clockwise) and reverse (counter-clockwise) rotation, and also acts as a safety lock when in the center position.
The forward/reverse selector switch is located above the trigger. Push it to the left for forward (clockwise) rotation (for tightening screws/nuts) and to the right for reverse (counter-clockwise) rotation (for loosening screws). When the switch is in the center position, the trigger is locked, preventing accidental startup.
6.6 Intelligent Torque Protection

The intelligent torque protection system enhances drilling accuracy and features automatic shutdown on overload, preventing damage to screws, objects, and the motor.
This drill features intelligent torque protection, which helps prevent damage to screws and workpieces by automatically shutting down in case of overload. This also contributes to improved drilling accuracy.
6.7 Material Suitability

The multi-function impact drill is suitable for a wide range of materials including hardwood, marble, bubble brick, masonry walls, cement walls, ceramic tiles, and stainless steel.
7. Maintenance
7.1 Brushless Motor Advantages

Comparison highlighting the benefits of a brushless motor: enhanced power, extended lifespan, high efficiency, and low noise operation, compared to brushed motors requiring frequent brush replacement and having lower efficiency.
The Ginour drill is equipped with an advanced brushless motor. Unlike traditional brushed motors, brushless motors are virtually maintenance-free as they do not have carbon brushes that wear out. This design ensures higher performance, longer runtime, and extended tool lifespan due to reduced friction and better heat management.
7.2 General Cleaning
- Keep the ventilation openings of the tool clean to prevent overheating.
- Regularly clean the tool housing with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Remove any dust or debris from the chuck and other moving parts.
7.3 Battery Care
- Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
- Do not store batteries in a discharged state for long periods. Charge them periodically if not in use.
8. Troubleshooting
If you encounter issues with your drill, refer to the following common problems and solutions:
- Tool does not start: Ensure the battery is fully charged and properly inserted. Check that the forward/reverse selector switch is not in the center (locked) position.
- Reduced power or runtime: The battery may need recharging. Over time, battery capacity can decrease. Ensure the battery is not old or damaged.
- Excessive vibration or noise: Check that the drill bit is securely installed and not bent or damaged. Ensure all parts are properly assembled.
- Overheating: Allow the tool to cool down. Ensure ventilation openings are clear. Avoid continuous heavy-duty use without breaks. The brushless motor has good heat dissipation to prevent overheating.
For persistent issues, please contact customer support.
9. User Tips
- Battery Runtime: The actual working time of the battery can vary significantly depending on the application, material, and the size/diameter of the screws or drill bits used. Heavy-duty tasks will consume battery power faster.
- Makita Battery Compatibility: This Ginour drill is adaptable for Makita 18V batteries, offering flexibility if you already own Makita battery systems.
- Optimal Torque: Always start with a lower torque setting and gradually increase it until you find the optimal setting for your task to prevent stripping screws or damaging materials.
- Impact Function: The impact drilling function is specifically designed for hard materials like masonry. Do not use it for wood or metal drilling, as it can damage the material or the drill bit.
10. Warranty and Support
For any questions, technical assistance, or warranty claims, please contact the seller or manufacturer's customer support. Keep your purchase receipt as proof of purchase.