1. Introduction
Thank you for choosing the DongCheng Cordless Hammer Drill DCZC04-24. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your new power tool. Please read this manual thoroughly before first use and keep it for future reference. This high-performance tool is designed for various drilling and light demolition tasks in materials such as concrete, steel, and wood.
2. General Safety Instructions
Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Failure to follow these instructions may result in serious injury.
- Work Area Safety: Keep your work area clean and well-lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Electrical Safety: Avoid body contact with earthed or grounded surfaces (e.g., pipes, radiators, ranges, refrigerators). Do not expose power tools to rain or wet conditions.
- Personal Safety: Always wear eye protection. Use hearing protection when operating for extended periods. Dress properly; avoid loose clothing or jewelry. Secure long hair.
- Tool Use and Care: Do not force the power tool. Use the correct power tool for your application. Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
- Battery Pack Safety: Recharge only with the charger specified by the manufacturer. Do not use battery packs other than those specifically designated for the power tool.
3. Package Contents
Upon unpacking, please verify that all items listed below are present and undamaged:
- DongCheng Cordless Hammer Drill DCZC04-24 Body
- 1 x 20V 4.0Ah Lithium-Ion Battery
- 1 x Battery Charger
- 1 x Auxiliary Handle
- 1 x Adjustable Depth Rod
- 4 x SDS-plus Drill Bits
- 1 x 16-inch Carrying Bag

4. Technical Specifications
| Feature | Specification |
|---|---|
| Model | DCZC04-24 |
| Motor Type | Brushless Motor (500W) |
| Voltage | 20V Max |
| Impact Energy | 2.7 Joules |
| Rated Impact Frequency | 0-4500 BPM (Blows Per Minute) |
| No-load Speed | 0-1000 RPM (Revolutions Per Minute) |
| Chuck Type | SDS-Plus Quick Change |
| Max. Drilling Capacity (Concrete) | φ24 mm |
| Max. Drilling Capacity (Steel) | φ13 mm |
| Max. Drilling Capacity (Wood) | φ28 mm |
| Battery Capacity | 4.0 Ah |
| Weight (Tool Only) | 3.2 kg |
| Features | LED Work Light, 4-Bar Fuel Gauge, Dust-proof Ventilation, Ergonomic Rubberized Grip |


5. Setup and Assembly
5.1 Attaching the Auxiliary Handle and Depth Rod
- Loosen the auxiliary handle by twisting it counter-clockwise.
- Slide the handle onto the front of the drill body.
- Insert the depth rod into the hole on the auxiliary handle. Adjust to the desired drilling depth.
- Tighten the auxiliary handle by twisting it clockwise to secure both the handle and the depth rod.
5.2 Installing/Removing SDS-Plus Drill Bits
- Installation: Pull back the chuck collar, insert the SDS-plus drill bit into the chuck until it clicks into place. Release the collar. Pull on the bit to ensure it is securely locked.
- Removal: Pull back the chuck collar firmly and pull the drill bit out.
5.3 Charging and Installing the Battery
- Charging: Connect the charger to a power outlet. Slide the battery pack onto the charger. The indicator light on the charger will show the charging status. Ensure the battery is fully charged before first use.
- Installation: Align the battery pack with the battery port on the bottom of the drill handle. Slide the battery into place until it clicks securely.
- Removal: Press the battery release button and slide the battery pack out of the tool.
6. Operating Instructions
The DongCheng Cordless Hammer Drill features 4 operational modes for versatility.

6.1 Mode Selection
Rotate the mode selector switch located on the side of the drill to choose the desired operation mode:
- Drilling Mode (Bohren): For drilling holes in metal, wood, and plastic.
- Hammer Drilling Mode (Hammerbohren): For drilling in masonry, brick, and concrete, combining rotation with hammering action.
- Demolition Work Mode (Abbrucharbeiten): For light chiseling and breaking tasks, such as creating grooves in tile/concrete or removing ceramic tiles.
- Chisel Angle Adjustment Mode (Meißel Winkelstellung): This mode allows you to adjust the angle of the chisel head for optimal positioning. This mode is not for drilling or chiseling; it is solely for angle adjustment.
6.2 Starting and Stopping the Tool
- To Start: Press the trigger switch. The built-in LED work light will illuminate the work area.
- To Stop: Release the trigger switch.
- Safety Lock: The tool features a safety lock switch to prevent accidental startup. Engage the lock when not in use.
6.3 Variable Speed Control
The trigger switch provides variable speed control. Pressing the trigger further increases the speed and impact frequency. This allows for precise control depending on the material and application.
6.4 Battery Fuel Gauge
The 4-bar fuel gauge on the battery indicates the remaining charge. Check this before starting work to ensure sufficient power.

7. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your tool.
- Cleaning: After each use, clean the tool with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the ventilation slots are clear of dust and debris.
- Efficient Cooling System: The tool is equipped with multi-directional heat dissipation channels to prevent overheating. Regularly check and clean these channels to maintain airflow.
- Chuck Maintenance: Keep the SDS-plus chuck clean and lightly lubricated to ensure smooth bit changes.
- Battery Care: Store batteries in a cool, dry place away from direct sunlight. Do not store fully discharged batteries for extended periods. Charge them periodically if not in use.
- Storage: Store the tool and accessories in the provided carrying bag in a dry, secure location out of reach of children.

8. Troubleshooting
If you encounter issues with your hammer drill, refer to the following table for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Tool does not start | Battery not charged or improperly installed; Safety lock engaged. | Ensure battery is fully charged and correctly inserted. Disengage the safety lock. |
| Reduced power or performance | Low battery charge; Incorrect mode selected; Worn or dull drill bit. | Recharge battery. Select appropriate mode for the task. Replace drill bit if necessary. |
| Drill bit not holding securely | Chuck collar not fully engaged; Debris in chuck. | Ensure chuck collar is fully released after inserting bit. Clean chuck of any debris. |
| Tool overheats | Blocked ventilation slots; Prolonged heavy use. | Clean ventilation slots. Allow tool to cool down during prolonged use. |
9. User Tips
- Always check the battery charge level using the 4-bar fuel gauge before starting a task to avoid interruptions.
- For optimal performance and battery life, avoid completely draining the battery. Recharge it when the power starts to noticeably decrease.
- When drilling into hard materials like concrete, start with a lower speed and gradually increase as needed. Apply steady, even pressure.
- Utilize the auxiliary handle for better control and reduced fatigue, especially during demanding tasks.
10. Warranty and Support
DongCheng products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the documentation provided at the point of purchase or contact your local DongCheng dealer. Keep your purchase receipt as proof of purchase.