Lishui Controller X128-AXC002

Contents

Brushless Motor Controller X128-AXC002 User Manual

Model: X128-AXC002 | Brand: Lishui Controller

1. Introduction and Overview

This manual provides detailed instructions for the installation, operation, and maintenance of the Brushless Motor Controller X128-AXC002. This controller is designed for use with electric bicycles, mountain bikes, and electric scooters, and is compatible with the 2HAO communication protocol display.

The Lishui Controller X128-AXC002 is a 48V, 22A speed controller engineered for reliable performance and efficient power management in electric vehicle applications.

2. Safety Information

  • Always disconnect power from the battery before performing any installation, maintenance, or troubleshooting.
  • Ensure all connections are secure and correctly polarized to prevent damage to the controller or other components.
  • Avoid exposing the controller to water, excessive moisture, or extreme temperatures.
  • Do not attempt to open or modify the controller casing, as this may void the warranty and pose a safety risk.
  • Consult a qualified technician if you are unsure about any installation or wiring procedures.

3. Product Features

  • Hall-Sensorless Technology: Offers low-cost maintenance, reduced interference, and supports zero-start functionality.
  • Customizable: Software allows for easy customization to match different components like pedals, displays, torque sensors, and motors.
  • High Performance: Engineered for efficient power delivery and responsive control.
  • Durability: Designed for reliability with a low defect rate, ensuring long-term use.
  • Compatibility: Specifically designed for 2HAO protocol displays.

4. Specifications

FeatureSpecification
ModelX128-AXC002
TypeBrushless Motor Controller
Battery Voltage48V
Current Limit22A
Cutoff Voltage39V
Display Meter Protocol2HAO
Dimensions (L x W x H)119mm x 52mm x 32mm
ColorSilver
OriginMainland China
Package Weight0.32 kg
Package Dimensions14cm x 8cm x 10cm

Controller Label Details

The controller's label provides essential information for compatibility and operation:

Close-up of the controller's specification label, highlighting model X128-AXC002, 48V battery, 39V cutoff, 22A current limit, and 2HAO display protocol.

Image: Close-up of the controller's specification label, highlighting model X128-AXC002, 48V battery, 39V cutoff, 22A current limit, and 2HAO display protocol.

Physical Dimensions

Dimensions of the Brushless Motor Controller X128-AXC002, showing 119mm length, 52mm width, and 32mm height.

Image: Dimensions of the Brushless Motor Controller X128-AXC002, showing 119mm length, 52mm width, and 32mm height.

5. Package Contents

  • 1x Brushless Motor Controller X128-AXC002
  • Assorted wiring harnesses and connectors (pre-attached)

6. Setup and Installation

Before installation, ensure the controller is compatible with your existing e-bike/scooter system, particularly the motor and display protocol (2HAO). Verify the model number and connector types with your original controller.

Wiring Diagram and Connector Identification

Wiring diagram of the Brushless Motor Controller X128-AXC002, showing numbered connectors: 1 (Display/Meter), 2 (Motor Hall Sensor), 3 (Power/Battery), 4 (Throttle), 5 (Battery Power Input), 6 (Motor Phase Wires), 7 (Brake Lever), 8 (Auxiliary/Speed Sensor).

Image: Wiring diagram of the Brushless Motor Controller X128-AXC002, showing numbered connectors.

  1. Display/Meter Connector (1): Connects to your 2HAO protocol display unit.
  2. Motor Hall Sensor Connector (2): Connects to the Hall sensors of your brushless motor.
  3. Power/Battery Connector (3): Connects to the main power supply from the battery.
  4. Throttle Connector (4): Connects to the throttle input for speed control.
  5. Battery Power Input (5): Main power input from the battery (typically an XT60-like connector).
  6. Motor Phase Wires (6): Connects to the three phase wires of your brushless motor (usually green, blue, yellow).
  7. Brake Lever Connectors (7): Connects to the brake levers, providing motor cut-off functionality.
  8. Auxiliary/Speed Sensor (8): Connects to a speed sensor or other auxiliary components as required by your system.

Installation Steps:

  1. Mount the Controller: Securely mount the controller in a protected area on your e-bike or scooter, away from direct impact, water, and excessive heat.
  2. Connect Motor Phase Wires: Connect the three thick motor phase wires (6) from the controller to the corresponding wires on your motor. Ensure a tight and secure connection.
  3. Connect Motor Hall Sensor Wires: Connect the motor Hall sensor connector (2) to your motor's Hall sensor cable.
  4. Connect Battery Power: Connect the main battery power input (5) and the power/battery connector (3) to your battery. Double-check polarity.
  5. Connect Display: Connect the display/meter connector (1) to your 2HAO protocol display.
  6. Connect Throttle: Connect the throttle connector (4) to your throttle unit.
  7. Connect Brake Levers: Connect the brake lever connectors (7) to your e-brake levers.
  8. Connect Auxiliary Wires: Connect any auxiliary wires (8) as needed for your specific setup.
  9. Final Check: Before applying power, visually inspect all connections to ensure they are correct, secure, and free from shorts.

7. Operation

Once the controller is correctly installed and connected to a compatible 2HAO protocol display, operation is straightforward:

  • Power On: Turn on your e-bike/scooter system via the main power switch or display unit. The display should illuminate and show system status.
  • Throttle Control: Use the throttle to control the motor speed. The controller's Hall-sensorless technology provides smooth and responsive acceleration.
  • Zero Start Feature: The controller supports a 'zero start' feature, allowing the motor to engage from a standstill.
  • Brake Function: Engaging the brake levers will cut power to the motor, ensuring safe stopping.
  • Display Interaction: Refer to your 2HAO display unit's manual for specific instructions on changing settings, monitoring battery life, speed, and other parameters.

8. Maintenance

  • Regular Cleaning: Keep the controller clean and free from dust, dirt, and debris. Use a dry cloth for cleaning.
  • Connection Checks: Periodically check all wiring connections to ensure they remain secure and free from corrosion.
  • Environmental Protection: Ensure the controller remains protected from direct water exposure and extreme temperatures to prolong its lifespan.
  • Firmware Updates: If available, consult Lishui Controller support for information on firmware updates to ensure optimal performance and compatibility.

9. Troubleshooting

ProblemPossible CauseSolution
Motor not responding / No powerLoose or incorrect wiring, low battery, incompatible components.Check all connections (power, motor, Hall sensors). Ensure battery is charged. Verify compatibility with motor and display.
Intermittent power / Erratic behaviorLoose connections, water ingress, faulty throttle/brake sensor.Inspect all wiring for damage or looseness. Ensure controller is dry. Test throttle and brake sensors.
Display not working or showing errorsIncompatible display protocol, loose display connection.Ensure your display uses the 2HAO protocol. Check display wiring.
Controller overheatingExcessive load, poor ventilation, short circuit.Reduce load. Ensure controller has adequate airflow. Check for shorts in wiring.

10. User Tips

  • Verify Compatibility: Always double-check the model number and connector types of your existing controller and display (especially for 2HAO protocol) before purchasing and installing this controller. This ensures a plug-and-play experience.
  • Contact Support Pre-Purchase: If unsure about compatibility, it is highly recommended to contact customer service with photos of your original controller's label and connectors.
  • Secure Wiring: Use zip ties or electrical tape to neatly secure all wiring, preventing accidental disconnections or damage during riding.

11. Warranty and Support

For warranty information, technical support, or further inquiries, please refer to the official Lishui Controller documentation or contact the manufacturer directly. A detailed brochure, including contact information, is available:

  • Lishui Controller Brochure (PDF): View PDF

Manufacturer Contact Information:

Nanjing Lishui Electronics Research Institute Co., Ltd
Add: No.9 Shuibao Road, Yongyang Town, Lishui District,
Nanjing, 211200, P.R.China
Tel: +86-25-5720-2368 / +86-25-5720-7820
Fax: +86-25-5721-2368
Email: sales@lsdzs.com

© 2024 Lishui Controller. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.