1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your PLAYAIBOX Wireless 2IN1 CarPlay Android Auto Wireless Supermini Box Adapter. This device converts your car's existing wired CarPlay or Android Auto system into a wireless one, offering enhanced convenience and connectivity.

Figure 1: PLAYAIBOX Wireless 2IN1 Adapter Overview
2. Safety Information
CAUTION: Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
Packaging Warning:
- To avoid danger of suffocation, keep this bag away from babies and children.
- Do not use this bag in cribs, beds, carriages, or play pens. This bag is not a toy.
3. Specifications

Figure 2: Product Specifications
| Feature | Detail |
|---|---|
| Product Name | Wireless CarPlay Adapter |
| Model | V9 |
| Rated Voltage | 1A |
| Power Input | 5V-1A |
| Bluetooth Version | 5.0 |
| WiFi | 2.4G+5G (802.11a/b/g/n/ac) |
| Working Temperature | -20℃ to 75℃ |
| Product Size | 21.8 x 21.8 x 22.8 mm |
| Product Weight | 6.8 g |
| Package Size | 85 x 95 x 25 mm |
| Package Weight | 52 g |
| Adapted Vehicle Type | GM (General Motors) and other compatible vehicles |
4. Compatibility
4.1 General Conditions
- This product only supports original car radios with existing wired Apple CarPlay or wired Android Auto functionality.
- If your car does not have wired CarPlay/Android Auto support, this product will not work.
- Models manufactured before 2016 are generally not suitable.
4.2 Mobile Phone Requirements
- For Wireless CarPlay: Supports iPhone 6 and above models with iOS 10 or above.
- For Wireless Android Auto: Supports Android 11 and above mobile phone models that natively support wireless Android Auto.
- Note: Huawei phones are generally not compatible with Android Auto Wireless due to their EMUI operating system.
4.3 Vehicle Compatibility
Suitable for original cars with wired CarPlay or wired Android Auto, including but not limited to:
- Audi, Benz, Porsche, VW, Volvo, Nissan, Ford, Lexus, Renault, Peugeot, Honda, Toyota, Skoda, Jeep, Hyundai, Haval, GMC, Chevrolet, Citroen, Buick, Cadillac, Chery, MG.
Known Incompatibilities:
- This device does not support BMW, Tesla, Subaru, or Mitsubishi cars.
- Nissan is not recommended for purchase due to potential compatibility issues.

Figure 3: Device Compatibility Overview
5. Setup Instructions
5.1 Wireless CarPlay Connection
- Step 1: Ensure your original car system supports wired Apple CarPlay.
- Step 2: Plug the PLAYAIBOX adapter into your car's original USB or Type-C data interface.
- Step 3: On your iPhone, go to Settings > Bluetooth and Wi-Fi, and turn them on.
- Step 4: Search for the Bluetooth device named "Smart Dongle-XXXX" (where XXXX are unique characters) on your iPhone and pair with it.
- Step 5: Allow synchronization and confirm to "Use CarPlay" when prompted.
- Step 6: Wait a few seconds for the CarPlay interface to display on your car's screen.

Figure 4: Wireless CarPlay Setup Steps
5.2 Wireless Android Auto Connection
- Step 1: Ensure your original car system supports wired Android Auto.
- Step 2: Plug the PLAYAIBOX adapter into your car's original USB or Type-C data interface.
- Step 3: On your Android phone, go to Settings > Bluetooth and Wi-Fi, and turn them on.
- Step 4: Search for the Bluetooth device named "Smart Dongle-XXXX" on your Android phone and pair with it.
- Step 5: Allow synchronization and confirm to "Use Android Auto" when prompted.
- Step 6: Wait a few seconds for the Android Auto interface to display on your car's screen.

Figure 5: Wireless Android Auto Setup Steps
Video 1: Product Display and Connection Demonstration
6. Operation
6.1 Maintaining Original Car Controls
The PLAYAIBOX adapter is designed to integrate seamlessly with your car's existing control systems. You can continue to use:
- Steering wheel controls
- OEM control knob
- Voice Control
- Touch screen controls

Figure 6: Original Car Control Retention
6.2 Switching Between CarPlay and Android Auto
If you need to switch from wireless CarPlay to wireless Android Auto (or vice-versa), follow these steps:
- Connect the appropriate phone (Android for Android Auto, iPhone for CarPlay) to the device's Bluetooth name.
- After a successful connection, the device will automatically reset and restart. This process takes approximately 30 seconds.
- Keep the device powered on during this process. The system will then switch to the desired function.

Figure 7: Dual-Way Connection Switch
7. Maintenance
- Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Avoid exposing the device to extreme temperatures, direct sunlight, or moisture.
- Do not attempt to disassemble or repair the device yourself, as this will void the warranty.
8. Troubleshooting
8.1 Device Not Connecting to Car's Wired System
If your original car has wired CarPlay/Android Auto but the adapter cannot connect:
- On your phone, delete the original car's Bluetooth device name from your paired devices list.
- Restore the adapter to its factory settings (if applicable, refer to the OTA update section for accessing the backend).
- The device uses a single Bluetooth connection. If your phone is already connected to the car's Bluetooth, it cannot connect to the adapter's Bluetooth simultaneously.
8.2 Android Auto Feature Not Starting / USB Not Recognized
If the Android Auto adapter pairs but the feature doesn't start, or the USB is not compatible/recognized:
- If you are using the Android Auto function for the first time in your car, connect your phone to the car via a data cable to activate Android Auto in wired mode first.
- Ensure that the Android Auto application on your Android phone is updated to the latest version.
- Turn off your phone's Bluetooth. Go to your phone's application management, search for Android Auto, and clear its cache. After clearing, restart the adapter and reconnect Bluetooth.
8.3 Adapter Light Remains On After Car is Turned Off
This is normal. Car power is not immediately cut off when the engine is turned off, so the adapter's light will remain on for a short period. The power consumption is extremely low and will not drain your car's battery.
8.4 Phone Cannot Use Other Wi-Fi Networks with Wireless Android Auto
When using the wireless Android Auto adapter, your phone's Wi-Fi connection will be occupied by the adapter for data transmission. Therefore, you cannot use other Wi-Fi networks simultaneously. You will need to use your phone's mobile data (SIM card) for internet access.
9. Firmware Update (OTA)
The device supports OTA (Over-The-Air) online firmware updates to provide a better user experience. It is recommended to update the firmware if you encounter abnormal operation or performance issues after a mobile phone system update. If the device is working normally, firmware updates are generally not necessary.
9.1 Accessing the Update Backend (iPhone)
- Connect your iPhone to the device's Wi-Fi network: "Smart Dongle" (Password: "12345678").
- Open the Safari browser on your iPhone and enter the IP address: 192.168.1.101.
- Click "Access" or "Go" to enter the online upgrade backend. (If you cannot access, verify your iPhone's Wi-Fi is correctly connected to the device).
9.2 Accessing the Update Backend (Android Phone)
- Connect your Android phone to the device's Wi-Fi network: "Smart Dongle" (Password: "12345678").
- Open the Chrome browser on your Android phone and enter the IP address: 192.168.1.101.
- Click "Access" or "Go" to enter the online upgrade backend interface. (If you cannot access, verify your Android phone's Wi-Fi is correctly connected to the device).

Figure 8: OTA Online Update
10. User Tips
- Initial Connection: The first connection might take a bit longer, but subsequent connections should be very fast.
- Heat Management: If the adapter becomes excessively hot, it might lead to intermittent disconnections. Ensure the adapter is placed in a well-ventilated area if possible.
- Post-Use Disconnection: For some car models (e.g., Peugeot 2008 2022), unplugging the adapter after turning off the car may prevent the screen from freezing upon restart.
11. Warranty & Support
11.1 Warranty
This product comes with a 1-year warranty from the date of receipt. The warranty covers manufacturing defects but does not cover damage caused by accident, misuse, or modification. The parcel without personal error use or damage which does not affect the second-sales of the parcel. Shipping costs for repair are borne by the customer.
11.2 Contact Support
For any questions, technical assistance, or warranty claims, please contact the manufacturer directly:
- Manufacturer: Huizhou Qiming Technology Co.,Ltd.
- Manufacturer Email: 746491952@qq.com
- WhatsApp Support: +86 15211449241
You can also refer to the User Manual (PDF) for additional information.

Figure 9: After-Sales Service Contact