1. Introduction
Thank you for choosing the MINISO FIT 10341 Artemis Space Launch System Model Building Blocks. This highly detailed building set allows you to construct a replica of the iconic Artemis Space Launch System, complete with its launch tower. Designed for enthusiasts aged 14 and above, this model offers an engaging and rewarding building experience. Please read this manual carefully before beginning assembly to ensure proper construction and enjoyment of your model.
2. Product Overview
The MINISO FIT 10341 model is a comprehensive building block set that recreates the Artemis Space Launch System. It consists of 3601 precision-engineered plastic pieces, designed for a challenging yet satisfying assembly. The finished model stands approximately 70cm tall and includes the main rocket, solid rocket boosters, and a detailed launch tower structure. Optional variants may include integrated lighting systems to enhance the display.
3. Setup and Assembly
Assembly of the MINISO FIT 10341 model requires patience and attention to detail. Follow the step-by-step instructions provided in the separate assembly guide included in your package.
3.1 Unpacking
- Carefully open the product packaging.
- Verify all numbered bags of building blocks and the instruction manual are present.
- Separate the pieces by type or bag number as suggested in the assembly guide to facilitate construction.
3.2 Assembly Steps
- Refer to the dedicated assembly instruction booklet for detailed, visual, step-by-step guidance.
- Ensure each piece is securely connected to prevent the model from becoming unstable.
- For variants with integrated lights, follow the specific wiring and installation instructions provided in the assembly guide. Batteries are not included and must be purchased separately if required for the lighting system.
- Take your time and enjoy the building process.
4. Operating the Model
This model is primarily designed for display. For variants equipped with an integrated lighting system:
4.1 Activating Lights (if applicable)
- Ensure the necessary batteries (not included) are correctly installed in the designated battery compartment, following the polarity markings.
- Locate the power switch for the lighting system, typically found at the base or a discreet location on the model.
- Toggle the switch to the 'ON' position to illuminate the model.
- Toggle to 'OFF' when not in use to conserve battery life.
5. Maintenance
Proper care will ensure the longevity and appearance of your model.
5.1 Cleaning
- Use a soft, dry cloth or a soft-bristled brush to gently remove dust from the model.
- For stubborn dirt, lightly dampen a cloth with water (avoiding excessive moisture) and wipe carefully. Do not use harsh chemicals or abrasive cleaners, as these can damage the plastic.
- If your model has a lighting system, ensure it is turned off and unplugged (if applicable) before cleaning. Avoid getting water near electrical components.
5.2 Storage
- Store the model in a cool, dry place away from direct sunlight to prevent discoloration or warping of the plastic.
- Keep the model away from extreme temperatures and high humidity.
- If disassembling for storage, keep all pieces organized, preferably in their original bags or labeled containers, to facilitate future reassembly.
6. Troubleshooting
Should you encounter any issues during assembly or display, refer to the following common solutions:
6.1 Missing Pieces
- Double-check all packaging materials and bags. Small pieces can sometimes be overlooked.
- If a piece is genuinely missing, contact customer support with the specific part number (from the assembly guide) and your purchase details.
6.2 Assembly Difficulties
- Review the assembly instruction booklet carefully, paying close attention to the diagrams and step sequence.
- Ensure you are using the correct pieces for each step.
- Sometimes, applying gentle, even pressure is needed to connect pieces. Avoid excessive force.
6.3 Lights Not Working (if applicable)
- Verify that batteries are installed correctly and are not depleted. Replace with fresh batteries if necessary.
- Check all wiring connections to ensure they are secure and properly seated according to the lighting system instructions.
- Ensure the power switch is in the 'ON' position.
7. Specifications
| Feature | Detail |
|---|---|
| Brand Name | MINISO |
| Model Number | 10341 |
| Material | Plastic |
| Set Type | Yes |
| Battery Included | No |
| Electronic | No |
| Certification | CE |
| Recommended Age | 14+, 18+ |
| Origin | Mainland China (Guangdong) |
| Piece Count | 3601 pieces |
| Assembled Height | Approx. 70 cm |
| Package Dimensions (L x W x H) | 31 cm x 25 cm x 17 cm |
| Package Weight | 2.994 kg |
8. User Tips
- Organize Pieces: Before starting, sort the building blocks by color, size, or bag number to streamline the assembly process.
- Work in a Well-Lit Area: Good lighting helps in identifying small pieces and following intricate steps.
- Take Breaks: If you feel frustrated or tired, take a break and return to the assembly with fresh eyes.
- Display Safely: Once assembled, place your model on a stable surface away from high traffic areas to prevent accidental damage.
9. Warranty & Support
For any questions, concerns, or support regarding your MINISO FIT 10341 Artemis Space Launch System Model Building Blocks, please contact the seller or retailer from whom you purchased the product. They can provide assistance with missing parts, assembly issues, or product-related inquiries.
