1. Introduction
Thank you for choosing the HYULIGHTS HYU-150B Mini LED Beam & 3D Spot & Halo Effect Moving Head Light. This professional lighting device is designed for versatile stage and DJ applications, offering a range of dynamic effects. This manual provides essential information for safe installation, operation, and maintenance of your device.
Package Contents:
- One (1) HYU-150B Moving Head Light unit
- One (1) Power Cable
- One (1) DMX Cable
- One (1) Bow Mount and two (2) Screws for installation
- One (1) User Manual (this document)
2. Safety Information
WARNING: To prevent fire and electric shock, do not expose this fixture to rain or moisture. Ensure proper grounding. For indoor use only.
Always observe the following safety precautions:
- Read all instructions carefully before operating the device.
- Keep a minimum distance of 0.5 meters (approximately 1.6 feet) from flammable materials to the surface of the fixture.
- The maximum temperature of the external surface can reach 120°C (248°F). Avoid direct contact during operation.
- Ensure the power supply matches the specified voltage (AC110-240V 50-60HZ).
- Disconnect the power cable before cleaning, servicing, or moving the fixture.
- Do not operate the fixture if the power cable is damaged.
- Do not attempt to repair the device yourself. Refer all servicing to qualified personnel.
- Ensure adequate ventilation around the fixture.

3. Setup
3.1 Installation
The HYU-150B is designed for self-contained installation. Ensure the mounting surface is stable and capable of supporting the fixture's weight (5 KG G.W.). Use the provided bow mount and screws to securely attach the light if suspending or mounting.
3.2 Connections
Connect the power cable to a suitable power outlet (AC110-240V 50-60HZ). For DMX control, connect a DMX cable from your DMX controller to the 'DMX IN' port on the fixture. If linking multiple fixtures, connect from 'DMX OUT' of the first fixture to 'DMX IN' of the next.

4. Operating Instructions
The HYU-150B features a 4-digit LED display for control and mode selection. Use the MENU, UP, DOWN, and ENTER buttons to navigate and adjust settings.
4.1 Playing Modes
The fixture supports the following playing modes:
- Auto-running: Pre-programmed light sequences run automatically.
- Sound-activated: The light reacts to sound and music.
- DMX512: Control the fixture using an external DMX controller (16/20 channels).
- Master-Slave: Link multiple fixtures where one acts as the master and others follow its programming.
4.2 Movement and Effects
- Horizontal Scan Angle: 540°, with adjustable speed.
- Vertical Scan Angle: 180°, with adjustable speed.
- Color Wheel: Features 8 colors plus half-color effects and infinite rotating speed.
- Gobo Wheel: Includes 8 gobos with shake effect and infinite rotating speed.
- Prism: Equipped with 1 piece of 18 rotating prisms (no zoom) and 1 piece of 3D prism for diverse beam patterns.
- Dimmer: 0-100% with regulated constant color control.
- Strobe: Adjustable strobe effect at 25 times/second.
- Halo Effect: A 30W 24LED SMD5050 RGB 3in1 halo effect surrounds the main beam.




5. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your moving head light.
- Cleaning: Periodically clean the lenses and external surfaces with a soft, lint-free cloth. For stubborn dirt, use a mild glass cleaner. Ensure the fixture is powered off and cooled down before cleaning.
- Inspection: Regularly check all cables, connections, and mounting hardware for any signs of wear, damage, or looseness.
- Ventilation: Ensure that the ventilation openings are clear of dust and debris to prevent overheating.
6. Troubleshooting
If you encounter issues with your HYU-150B, refer to the following common problems and solutions:
- No Power:
- Check if the power cable is securely connected to both the fixture and the power outlet.
- Verify the power switch on the rear panel is in the 'ON' position.
- Inspect the fuse on the rear panel. If blown, replace it with a fuse of the same type and rating.
- No DMX Control:
- Ensure DMX cables are correctly connected (DMX IN/OUT).
- Verify the DMX address and mode settings on the fixture match your DMX controller.
- Check for proper termination of the DMX chain if using multiple fixtures.
- Fixture Not Moving/Responding:
- Confirm the fixture is in the correct operating mode (e.g., DMX mode if controlled externally).
- Check for any error messages on the LED display.
- Power cycle the unit (turn off, wait a few seconds, then turn on).
If the problem persists after attempting these solutions, contact customer support.
7. Specifications
| Feature | Specification |
|---|---|
| Voltage | AC110-240V 50-60HZ |
| Total Power | 180W |
| Light Source | 1Pcs 150W White LED High Power |
| Halo Effect | 30W 24LED SMD5050 RGB 3in1 |
| Strobe | 25 times/sec |
| Prism | 1pcs 18 rotating prisms (No Zoom) |
| 3D Prism | 1PCS 3D Prism |
| Beam Angle | 1.5° |
| Playing Modes | Auto-running, Sound-activated, DMX512, Master-Slave |
| Control Channels | 16/20 channels |
| Horizontal Scan Angle | 540°, speed can be controlled |
| Vertical Scan Angle | 180°, speed can be controlled |
| Color Wheel | 8 colors + Half color effect + infinite rotating speed |
| Gobo Wheel | 8 gobos + shake + infinite rotating speed |
| Dimmer | 0-100% with regulated constant color control |
| Control Panel | 4 Digital LED display figures |
| Display Board | LED display |
| Net Weight (N.W) | 4.3 KG |
| Gross Weight (G.W) | 5 KG |
| Packing Size | 34.5*26*25.5cm |
8. User Tips
No specific user tips were available from the provided reviews or Q&A. For best results, experiment with different DMX channels and modes to discover the full range of effects this light can produce.
9. Warranty and Support
9.1 Warranty
This product comes with a 2-year warranty from the date of purchase. We will send brand new items for free or give you a full refund if any quality problems occur within this period.
9.2 Technical Support
For any technical inquiries or support needs, please contact our customer service. We aim to provide a quick response within 12 hours to assist you with any questions or issues you may have. Providing a video or pictures of the issue can help expedite the support process.