tkstar TK913

Contents

TK913 TKSTAR Mini GPS Tracker User Manual

Model: TK913 (2G/4G)

1. Product Overview

The TK913 TKSTAR Mini GPS Tracker is a compact and versatile tracking device available in 2G and 4G versions. It features GPS+LBS dual positioning, real-time tracking, historical route playback, and various alarm functions. Its waterproof design and powerful magnetic attachment make it suitable for tracking vehicles, luggage, and family members.

TKSTAR Mini GPS Tracker with 4G LTE logo

Figure 1: TKSTAR Mini GPS Tracker with 4G LTE capability.

TKSTAR Mini GPS Tracker held between two fingers, showing its compact size

Figure 2: The compact size of the TKSTAR Mini GPS Tracker.

Video 1: Product demonstration showcasing the TKSTAR Mini GPS Tracker's features and compact design.

2. Setup Guide

2.1 Getting to Know Your GPS Tracker

Close-up of the TKSTAR Mini GPS Tracker showing indicator light, SIM card slot, and USB port, with dimensions.

Figure 3: Device components and dimensions (55mm x 36mm x 21mm).

2G Device Components:

  1. Indicator light
  2. SIM card slot
  3. USB port

4G Device Components:

  1. Indicator light
  2. SIM card slot
  3. On/Off button
  4. USB port

2.2 SIM Card Preparation

  1. Purchase SIM Card: Obtain a Normal SIM card (Nano SIM card). Register it and ensure it has credit.
  2. Remember SIM Card Number: Make a note of your GPS SIM card number. This is crucial for SMS commands.
  3. GPS Operation: Note that GPS functionality works best outdoors.

2.3 SIM Card Installation

Open the rubber cover and insert the SIM card into the SIM card slot.

Diagram showing SIM card insertion into the tracker.

Figure 4: SIM card insertion process.

For 2G Device:

  • Turn on: Insert the SIM card. Indicator lights will turn on.
  • Turn off: Remove the SIM card. Indicator lights will go out.

For 4G Device:

  • Turn on: Short press the On/Off button after inserting the SIM card. Indicator lights will turn on.
  • Turn off: Press and hold the On/Off button until the indicator lights go out.

2.4 Charging the Device

Charge your GPS tracker using the provided USB cable. The red indicator light will show the battery is charging. It will disappear once fully charged.

NOTE: Do not use a fast charger, as this can damage the battery.

2.5 APN Settings

For online tracking via APP and platform, the APN (Access Point Name) must be set correctly. Each SIM card carrier has its own APN content. You can find this information online or by inserting the SIM card into a mobile phone.

Command Instruction to Set APN:

InstructionCommandReply
Set APN (any existing will be replaced)apn123456 apn contentapn ok
Set APN usernameapnuser123456 contentapnuser ok
Set APN passwordapnpasswd123456 contentapnpasswd ok

After successful APN setting, remove and re-insert the SIM card to reboot the device.

Example for SpeedTalk SIM card (US):

  • APN: Mobilenet
  • APN username: (none)
  • APN password: (none)

Send SMS: apn123456 mobilenet. Once you receive apn ok, reboot the device.

3. Operating Instructions

3.1 Indicator Light Status

Indicator Light StatusMeaning
Yellow light - SolidNo GPRS signal
Yellow light - FlashGPRS connection
Blue light - SolidNo GPS signal
Blue light - FlashGPS connection
Red light - SolidCharging
Red light - OffFull charged

3.2 Tracking Methods

The TK913 tracker supports both website and mobile application tracking.

3.2.1 Website Tracking

  • Platform: www.mytkstar.net
  • Select "Login by ID" on the screen.
  • Enter the ID No. (found on the back side of the cover) and Password (123456).

3.2.2 Mobile Application Tracking

Search for "WINNES GPS" in the Apple App Store or Google Play Store, or scan the QR code below to install the application.

QR code for WINNES GPS app

Figure 5: QR Code for WINNES GPS App.

Login by ID (for single tracker):

  • Select "Login by ID" on the app screen.
  • Server: www.mytkstar.net
  • ID No.: On the back side of the cover.
  • Password: 123456

Login by Username (for multiple trackers):

  • If you have two or more tracking devices, click "Sign Up" in the app to register an account.
  • You can add multiple device ID numbers to your account.
  • Select "Login by username" on the app screen.
  • Server: www.mytkstar.net
  • Username: The email used for account creation.
  • Password: The password set during registration.
Flowchart showing the APP setting process from login to real-time tracking and historical route.

Figure 6: WINNES GPS App login and tracking flow.

3.2.3 Real-time Tracking

The app allows real-time tracking of the device and your smartphone. Use '+' and '-' to zoom in/out on the map. Click the location icon to view the difference between your smartphone and device location, and the map icon to switch between 2D/3D views.

Diagram illustrating the application of the GPS tracker for family safety, showing a parent tracking children.

Figure 7: Application of GPS for family safety.

Image showing the GPS tracker next to luggage, with a phone displaying 'Find my trunk!' and 'I am here!', demonstrating its use for tracking personal items.

Figure 8: Tracking personal items like luggage.

3.2.4 Explanation of APP Icons and Settings

  • Historical route: View up to six months of historical data by selecting start and end times.
  • Geo fence: Set a virtual boundary. An alarm is generated if the device exits or enters this boundary.
  • Issue: Send commands to the device.
  • Device info: Displays device information.
  • Alert message: Shows alert messages generated by the device.
  • Account Info: Displays account information.
  • Notifications: Toggle different alarm types on/off.

3.2.5 SMS Tracking

You can track the device via SMS commands. Send a message with "G123456#" (where 123456 is the password) to the SIM card number in the tracker. You will receive a Google Maps link with the device's location.

SMS Reply Example (GPS satellites signal):

  • lat:22.63952 lon:114.17122: Latitude and longitude.
  • spd:002: Device moving speed (km/h).
  • T:24/09/15 16:00: Real-time tracking time (default London time, adjustable in APP).
  • bat:100%: Battery level (alarms below 20%).
  • ID:2015070203: Device ID for APP/platform login.
  • Google maps link: Link to Google Maps showing tracker position.

SMS Reply Example (LBS tracking without GPS signal):

  • lac:27a4 1223: Real-time LBS positioning data.
  • T:24/09/15 15:17: LBS positioning time.
  • bat:100%: Battery level (alarms below 20%).
  • ID:2015070203: Device ID for APP/platform login.
  • Last:T:25/09/15 03:04: Time of last GPS signal.
  • Google maps link: Position of last GPS signal.

3.3 Device Settings via SMS Commands

3.3.1 Admin Number Setting

After setting an admin number, all SMS operations to the device will only be accepted from this number.

  • Command: admin123456 phone number (Replace phone number with your mobile number, not the tracker's SIM number).
  • Reply: admin ok
  • Example: admin123456 00861326XXXXXX

Alerts (overspeed, shake sensor, low battery) will be sent to the admin number.

To Cancel Admin Number:

  • Command: noadmin123456
  • Reply: noadmin ok

3.3.2 Terminal (Local) Time Setting

Factory setting is GMT 0.

  • Command: timezone123456 local time zone (e.g., timezone123456 +1, timezone123456 -1, timezone123456 0)
  • Reply: time ok!

This command is used for changing the timezone in SMS positioning.

3.3.3 Over-speed Alarm Setting

This feature works only in "Sleep by shock sensor mode."

  • Command: speed123456 070 (Sets speed limit to 70km/h).
  • Reply: speed ok

If the unit's speed exceeds the set limit, it will send "speed alarm!" to the admin number every 5 minutes.

To Cancel Over-speed Alarm:

  • Command: nospeed123456
  • Reply: nospeed ok

3.3.4 Shake Alarm Setting

Keep the tracker stationary for 5 minutes for this function to activate. The tracker will send "sensor alarm!" to the admin number when shaken.

  • Command: shock123456
  • Reply: shock ok

To Cancel Shake Alarm:

  • Command: noshock123456
  • Reply: noshock ok

3.3.5 Device Working Mode Setting

Sleep by shock sensor mode (Factory default):

  • Command: sleep123456 shock
  • Reply: sleep shock ok

In this mode, if no shock is detected for 5 minutes, the tracker enters low consumption mode (GPS off, GSM on). Vibration, SMS, or calls can wake it up.

Sleep by time mode:

  • Command: sleep123456 time
  • Reply: sleep time ok

In this mode, the tracker works for 5 minutes after waking up, then returns to low consumption mode (GPS off, GSM on). SMS commands or calls can wake it up.

3.3.6 Reset Hardware

  • Command: begin123456
  • Reply: begin ok

This restores all settings to factory defaults, except for the APN setting.

4. Maintenance

4.1 General Care

  • Do not disassemble the device.
  • Avoid exposing the device to very strong magnetic fields (e.g., near transformers), as this can cause malfunctions or damage.
  • The device is waterproof IP67, meaning it can resist splash water but should not be submerged.

4.2 Battery Care

  • Always use the provided USB cable for charging.
  • Avoid using fast chargers, as they can damage the internal battery.

4.3 Disposal

Batteries are hazardous waste. Dispose of them in appropriate containers at commercial battery collection points or local council waste disposal facilities. Dispose of packaging materials (cardboard, plastics) according to local recycling guidelines.

5. Troubleshooting (FAQ)

5.1 Device Fails to Turn On

  • Check if the battery is charged.

5.2 No SIM Signal

  • Ensure the SIM card is installed correctly.
  • Verify that the SIM card supports GSM or LTE networks.
  • Confirm that the SIM card's PIN code is deactivated.
  • Make sure call transfer is not active on the SIM card.

5.3 No GPS Signal

  • For optimal GPS signal reception, use the device in an open area with a clear view of the sky.

5.4 No Reply to SMS Commands

  • Check if the command format is correct.
  • Ensure the SIM card has sufficient balance.
  • Verify that the SIM card supports making calls, sending messages, and GPRS network.
  • Confirm that call forwarding is turned off.

5.5 SMS Positioning Works, but APP/Web Platform Does Not

  • Check if the APN is correctly set. Refer to section 2.5 for APN settings.

5.6 Platform Position Differs from Actual Position

  • If the platform shows a position like Pic 2 (LBS data), it means there is no GPS signal, and the position is the last known GPS location.
  • If it shows a position like Pic 1 (GPS data), it means the device has not yet reached the uploading time for the latest GPS data.

6. Specifications

FeatureSpecification
Model NameTK913 (2G/4G)
Dimensions55mm x 36mm x 21mm (2.17" x 1.42" x 0.83")
Net Weight58g
2G Version (GSM)850/900/1800/1900MHz
4G Version (LTE-FDD)B1/B3/B5/B7/B8/B20 (4GE), B1/B2/B3/B4/B5/B7/B8/B28/B66 (4GSA)
4G Version (GSM)850/900/1800/1900MHz
GPS Accuracy5m
Input Voltage5V − 1.0A
BatteryRechargeable 3.7V 1500mAh Lithium battery
Charging Period3 hours
Standby Time15 days (manual), 25 days (product description)
GPS Sensitivity-159dBm
Time To First Fix (Cold)35-80s
Time To First Fix (Warm)35s
Time To First Fix (Hot)1s
Wall Charger110-220V input, 5V output
Storage Temperature-40 to +85 degrees Celsius
Operation Temperature-20 to +55 degrees Celsius
Humidity5%--95% non-condensing
Waterproof RatingIP67
Special FeaturesRemote Control
Display TypeLED
Screen SizeNo screen
GPS ModuleYes
CertificationCE, FCC, RoHS

7. User Tips

  • SIM Card Requirement: Remember that a functional SIM card with an active plan is essential for the tracker to work.
  • App Usage: The WINNES GPS app is user-friendly for checking routes and tracking.
  • Outdoor Use: For best GPS accuracy, ensure the device has a clear view of the sky.
  • Customer Support: If you encounter any issues, the seller is generally responsive and helpful.

8. Warranty & Support

8.1 Declaration of Conformity

Juneo declares that the Winnes/TKMARS GPS Tracker (item no. TK913) conforms to the fundamental requirements and other relevant provisions of Directive 2014/53/EU (CE RED Directive).

The full text of the declaration of conformity can be viewed on the website: www.mytkstar.net/en/doc.html

8.2 User Manual (PDF)

A detailed user manual in PDF format is available for download. You can view it here: TK913 User Manual (PDF).

8.3 Customer Support

For any questions or assistance, please contact the seller directly through the platform where you purchased the device. They are known for being helpful and responsive.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.