Phomemo M250

Contents

Phomemo M250 Label Maker User Manual

Model: M250

1. Product Introduction

1.1 Packing List

The Phomemo M250 Label Maker package includes the following items:

  • M250 Printer x1
  • Quick Start Guide x1
  • Type-C Cable x1
  • 100-Pc 40*30 mm Paper Roll x1

Note: The paper roll is pre-installed in the printer. If you purchased a bundled printer package, it might not include an additional 40*30mm-100pc Paper Roll.

Phomemo M250 Packing List
Figure 1.1: Phomemo M250 Label Maker and its included accessories.

1.2 Printer Parts Instruction

Familiarize yourself with the different parts of your M250 Label Maker:

Phomemo M250 Printer Parts Diagram
Figure 1.2: Overview of the Phomemo M250 Label Maker's components.
  • Paper Exit: Where printed labels emerge.
  • Power/Menu Button: Used to power on/off and navigate menus.
  • Display: Shows printer status and menu options.
  • Feed/Select Button: Used to feed paper or select menu options.
  • Top Cover: Opens to access the paper compartment.
  • Cover Open Lever: Releases the top cover.
  • Reset Hole: For resetting the device (use a pin).
  • Type-C Charger Port: For charging the device.
  • Paper Guides: Adjustable guides to hold the label roll in place.
  • Manual Cutter: For tearing off printed labels.
  • Paper Compartment: Where the label roll is loaded.

2. Getting Started

2.1 Downloading the App

The Phomemo M250 Label Maker operates with the "Print Master" app for mobile devices and "Labelife" software for computers.

For Mobile Devices (Print Master App):

Method 1: Search and Download

  • Search for "Print Master" on the Apple App Store (for iOS) or Google Play Store (for Android).
  • Download and install the app.

Method 2: Scan QR Code

  • Scan the QR code below using your phone's camera, a built-in QR scanner, or a dedicated QR code scanning app.
Print Master App Download QR Code
Figure 2.1: QR code for downloading the Print Master app. Also shows app icons for App Store and Google Play.

Note for iOS users: Safari browser on Apple devices may not support direct QR code scanning. Use your device's built-in QR code scanner instead.

2.2 First Use Guide (Mobile App)

  1. Remove Protective Film: Gently remove any protective film from the printer's display or print head. This step is crucial for first use.
  2. Power On: Long press the Power Button for approximately 3 seconds until the Display lights up.
  3. Open App: Launch the "Print Master" app on your mobile device.
  4. Grant Permissions: The app will request necessary permissions (e.g., Bluetooth access). Grant these permissions to proceed. (Refer to section 6.2 for more details on permissions).
  5. Auto Connect: Tap the "Auto Connect" button within the app. The app will search for and connect to your M250 printer via Bluetooth. (Refer to section 6.1 for manual connection instructions).
  6. Edit and Print: Once connected, you can edit your first label within the app. Tap the "Print" button when you are finished editing.
  7. Printing Completed: The app will indicate when printing is complete.
  8. Tear Off Label: Carefully tear off the printed label along the Paper Exit using the manual cutter.
  9. Remove Liner: Peel off the backing liner from the label.
  10. Attach Label: Apply the label to a dry, flat surface.
Phomemo M250 in use with app
Figure 2.2: The Phomemo M250 Label Maker in operation, showing a label being printed.

3. Replacing the Paper Roll

Follow these steps to replace the label paper roll in your M250 printer:

  1. Power On and Open App: Long press the Power Button for 3 seconds until the Display lights up. Open the "Print Master" app.
  2. Scan Label (Optional but Recommended): Tap the "Scan" button in the app. This helps the printer identify the label roll size. (See section 4 for more details).
  3. Remove Old Roll: Press down the Cover Open Lever and remove the empty or old paper roll from the Paper Compartment.
  4. Prepare New Roll: Slide the Paper Guides outwards as far as they can go. Remove the anti-loosening sticker from the new paper roll.
  5. Load New Roll: Place the new paper roll into the Paper Compartment, ensuring it is oriented correctly. The label paper should face the Power Button and be slightly higher than the Paper Exit.
  6. Adjust Guides: Slide the Paper Guides inwards until they snugly hold the edges of the paper roll.
  7. Close Cover: Extend the label paper out above the Paper Exit and then close the Top Cover.
  8. Calibration: The Paper Exit will automatically feed out a blank piece of label paper, indicating that calibration is complete.

4. Identifying Label Sizes

Correctly identifying label sizes ensures optimal printing. You can do this in three ways:

4.1 Scanning the QR Code

If your label roll box has a QR code:

  1. Connect Printer: Ensure your printer is connected to the "Print Master" app.
  2. Go to Home and Scan: In the app, go to the "Home" screen and tap "Scan".
  3. Aim at QR Code: Aim the scanning frame at the QR code on the paper roll box. The app will identify the label size and redirect you to the editing page.

Important: The app must be connected to the printer for QR code scanning to work. Otherwise, scanning will fail, and the editing page will not be displayed.

4.2 Finding Label Specifications

If there is no QR code on the paper roll box, you can manually enter the label size:

  1. Locate Specifications: Find the label specifications (e.g., 40*30 mm) on the information side of the paper roll box.
  2. Create New Label: In the "Print Master" app, click on "New Label" on the homepage and select "Newly created by blank label".
  3. Input Specifications: Enter the corresponding label width and height into the app.
  4. Enter Editing Page: The app will then take you to the editing page with the correct label dimensions.

4.3 Measuring the Label

If specifications are not available on the box, you can measure a single label:

  1. Measure: Use a ruler to measure the length and width of a single label.
  2. Create New Label: In the "Print Master" app, click on "New Label" on the homepage and select "Newly created by blank label".
  3. Input Measurements: Enter the measured label width and height into the app.
  4. Enter Editing Page: The app will then take you to the editing page with the correct label dimensions.

5. Downloading and Installing the PC Application

For computer printing, use the "Labelife" application:

  1. Connect Printer to Computer: Long press the Power Button for 3 seconds until the Display lights up. Connect the printer to your computer using the original Type-C to USB-A cable supplied. Insert the Type-C end into the printer and the USB Type-A end into your computer.
  2. Download Labelife: Visit ms.phomemo.com/?mo=M250 to download the "Labelife" application for your operating system (Windows or Mac).
  3. Install Labelife: Follow the on-screen instructions to install the "Labelife" application. You can choose "One-click Installation" or "Custom Install". Once installation is complete, launch the application.

For detailed application guides for Labelife, please visit the official website: https://labelife.cc

6. App User Guide

6.1 Manual Connection (Print Master App)

If auto-connect fails or you prefer manual connection:

  1. Select Your Printer: In the "Print Master" app, navigate to the printer selection screen (e.g., "Choose your printer"). Select "M200 Series" or "M250" if listed.
  2. Tap to Connect: Click the top right corner of the app interface, usually indicated by a "Tap to connect" prompt or an icon.
  3. Searching for Printer: The app will begin searching for available printers.
  4. Connected: Once found, the app will display "Connected", and you can proceed with printing.

6.2 Permission Description (Print Master App)

The "Print Master" app requires certain permissions to function correctly:

For iOS users:

  • Internet Access: The app requires access to the internet (WLAN and Cellular or WLAN Only) for full functionality.
  • Bluetooth Permission: The app will request to use Bluetooth to connect to the printer. Tap "OK" to grant permission.

For Android users:

  • Bluetooth Permission: The app will request to use Bluetooth to connect to the printer. Tap "OK" to grant permission.
  • Nearby Bluetooth Devices: The app requires permission to search for nearby Bluetooth devices. For Android 12 and above, this is a specific permission. For systems below Android 12, GPS permission may be required instead.
  • Bluetooth Pairing Request: You may receive a pairing request. You can simply tap "Pair" without checking "Allow access to your contacts and call history."

7. Safety Instructions

7.1 Manual Cutter and Print Head Instructions

Manual Cutter and Print Head Safety
Figure 7.1: Location of the Manual Cutter and Print Head.
  • Warning: The manual cutter has sharp edges. Do not touch the edges of the cutter to avoid injury.
  • Warning: The print head can become HOT during operation. Touching it when hot can cause burns. Before touching the Print Head, wait at least 30 minutes after turning off the printer for it to cool down completely.

7.2 Charging Instructions

Phomemo M250 Charging Diagram
Figure 7.2: Diagram showing how to connect the M250 for charging.
  1. Prepare Power Adapter: Use your own power adapter (DC 5V/2A) with a Type-A port.
  2. Connect Cable: Insert the Type-C end (flat end) of the USB cable into the M250's Type-C Port. Insert the Type-A end (wide end) of the USB cable into the Type-A port of your power adapter.
  3. Check Display: After connecting to an outlet, observe the printer's display. If the printer is off, "Charging..." will be displayed. If the printer is on, a battery icon will appear in the top right corner.
  4. Charging Time: For quick use, charge for at least 20 minutes. For a complete charge, wait 2-3 hours or until the Display indicates "Charge Finished".
  5. Safety Precaution: The printer may heat up during charging. Avoid placing it on flammable materials like cotton or linen. Unplug the charger promptly once fully charged.

Caution: Avoid using the printer while charging, as this may reduce charging speed, compromise print quality, and shorten battery life.

7.3 Electrical Safety Warning

WARNING: Please pay attention to electrical safety. Do not disassemble, crush, or puncture the battery. This product is not a toy.

8. Cleaning and Maintenance

Important: Always ensure the printer is turned off before performing any cleaning or maintenance.

If you experience issues such as blank lines, blurry print, or missing characters, it may be due to dirt on the Print Head. Follow these steps to clean it:

  1. Cool Down: If you have recently printed, wait at least 30 minutes for the Print Head to cool down completely.
  2. Clean Print Head: Use a cotton swab dipped in alcohol or a dedicated print head cleaning pen (purchased separately). Gently wipe the surface of the Print Head about 5 times to remove any dust and stains.
  3. Dry: Wait 5-10 minutes for the alcohol to evaporate completely before using the printer again.

9. Operator Panel Instructions

9.1 Display Instructions

The printer's display provides important status information:

Phomemo M250 Display Icons
Figure 9.1: Icons and indicators on the M250's display panel.
  • Top Cover opened: Indicates the top cover is open.
  • Settings: Access printer settings. When connected to a computer, this icon changes to a USB icon.
  • Bluetooth connected: Indicates a successful Bluetooth connection.
  • Printer Serial Number (SN Code): Displays the unique serial number of your printer.
  • Gap Label: Indicates the printer is set for gap labels.
  • Black Mark Label: Indicates the printer is set for black mark labels.
  • Continuous Label: Indicates the printer is set for continuous labels.
  • Feeding/Printing: Indicates paper feeding or printing in progress.
  • Charging status: Shows if the battery is charging.
  • Battery Level: Displays the current battery charge level.
  • Information Display Area: Shows various messages and the standby interface.

9.2 Button Instructions

Button TypeOperationFunction
Power ButtonLong press for 3sPower on/off
Press onceWhen in standby mode, access main menu for selection
Feed ButtonPress onceWhen in standby mode, feed out paper
When in main menu, access sub-menu for selection

Note: After selecting an option in a sub-menu, the system will automatically revert to the standby interface if there is no further activity for 10 seconds.

9.3 Menu Instructions

Main MenuSub-menuExplanation
LanguageEnglishChoose language
Darkness4(Weak), 6(Normal), 10(Dark)Choose print density
Pager typeContinuous, Gap, BlackChoose label type
Power OFF5 Minutes, 15 Minutes, 30 Minutes, 1Hour, 2Hour, 4Hour, 8Hour, 24Hour, NO Close (default option)Schedule automatic shut down
Restore Settings/Reset the device to factory settings
FirmwareShow firmware version/
AddressShow device address/
Test printTest printPrint device information

10. Specifications

FeatureSpecification
BrandPhomemo (Zodzi)
ModelM250
TypeThermal Printer, Label Maker
Max. Resolution203dpi
Print Speed30-50mm/s (up to 20ppm)
Consumable TypeLabel Paper
Max Paper Size75mm (supports 20-75mm tape width)
Paper Feed ModeRoll Feed
Interface TypeBluetooth, USB Type-C
Supports Network PrintingWireless (Bluetooth)
Double-sided PrintingNo
Battery2200mAh (Battery Included: Yes)
ApplicationFor Commercial (Business, Home, Office, School)
Dimensions (L x W x H)5.04" x 2.61" x 4.54" (approx. 12.8cm x 6.6cm x 11.5cm)
Weight0.55 kg
OriginMainland China
CertificationCE, FCC, RoHS

11. Troubleshooting

If you encounter issues with your Phomemo M250 Label Maker, try the following solutions:

  • No Power: Ensure the device is fully charged. Connect it to a power source and check the display for charging indicators.
  • Connection Issues (Bluetooth):
    • Make sure Bluetooth is enabled on your mobile device.
    • Ensure the printer is within range.
    • Restart both the printer and the "Print Master" app.
    • Check app permissions (refer to section 6.2).
    • Try manual connection (refer to section 6.1).
  • Connection Issues (USB/PC):
    • Ensure the USB cable is securely connected to both the printer and the computer.
    • Verify that the "Labelife" software and necessary drivers are correctly installed (refer to section 5).
    • Try a different USB port or cable.
  • Poor Print Quality (Blank lines, blurry, missing characters):
    • Clean the print head (refer to section 8).
    • Ensure the label roll is loaded correctly and the paper guides are adjusted properly.
    • Check the label type setting in the app/software to match your label paper (Continuous, Gap, Black Mark).
    • Adjust print density settings in the menu (refer to section 9.3).
  • Paper Jams/Incorrect Feeding:
    • Open the top cover and ensure there are no obstructions in the paper path.
    • Re-load the paper roll, making sure it's seated correctly and the guides are snug.
    • Ensure the anti-loosening sticker is fully removed from the label roll.
  • Incorrect Label Size Detection:
    • Ensure the printer is connected to the app when scanning QR codes.
    • Manually input the label dimensions if QR code scanning is not possible or incorrect (refer to section 4.2 and 4.3).

12. User Tips

Maximize your Phomemo M250 experience with these helpful tips:

  • Optimize Battery Life: The M250 features an auto sleep mode that activates after 5 minutes of inactivity, saving power. Remember to fully charge the 2200mAh battery for extended use, capable of printing over 5000 labels on a single charge.
  • Quick Label Loading: Utilize the integrated drop-in paper structure for 1-second paper loading. This design minimizes threading issues and paper jams, making roll changes fast and efficient.
  • Versatile Label Design: The "Print Master" app offers extensive features like OCR text scanning, voice input, and batch printing. Explore the 1500+ symbols and 200+ templates to create professional and personalized labels for various applications, from business logos to pantry organization.
  • Cross-Platform Flexibility: Take advantage of the printer's compatibility with iOS, Android, iPad, Windows, and macOS. Use Bluetooth for wireless printing via the "Print Master" app or a USB cable for wired connection with the "Labelife" software on computers.
  • Portable Convenience: Weighing only 390g, the M250 is ultra-light and fits easily in your pocket. This makes it ideal for on-site printing at warehouses, markets, or pop-up stores.
  • Label Size Compatibility: The printer supports label tapes from 20-75mm (0.78"-3.14") width. Ensure you use compatible label sizes for optimal performance. Note that it is not compatible with 4"x6" shipping labels.

13. Regulatory Information

13.1 FCC WARNING

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

13.2 ISED NOTICE (Canada)

CAN ICES(B)/NMB(B)

English: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

French: L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d' Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L' exploitation est autorisée aux deux conditions suivantes:

  1. L' appareil ne doit pas produire de brouillage;
  2. L' appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d' en compromettre le fonctionnement IC RF exposure statement:

The device has been evaluated to meet general IC RF exposure requirement. The device can be used in portable exposure condition without restriction.

IC Déclaration d'exposition aux RF: L'appareil a été évalué pour répondre aux exigences générales d'exposition aux RF d'IC. L'appareil peut être utilisé dans des conditions d'exposition portable sans restriction.

13.3 European Union Declaration of Conformity

DECLARATION OF CONFORMITY according to EN ISO/IEC 17050-1:2010

Manufacturer's Name and Address: Zhuhai Quin Technology Co., Ltd. ROOM 103-029(CENTRALIZED OFFICE AREA), 1F, BUILDING 1, NO. 18 FUTIAN ROAD, XIANGZHOU DISTRICT, ZHUHAI CITY, CHINA

EU Authorised Representative: Prolinx GmbH Brehmstr.56, 40239 Duesseldorf Germany

TYPE OF EQUIPMENT: Multifunctional Portable Label Maker
Model Number: M250
TRADE/BRAND NAME: N/A

Zhuhai Quin Technology Co., Ltd., as the responsible party for regulatory compliance, declares under our sole responsibility that as delivered the described product is in conformity with the Radio Equipment Directive 2014/53/EU, EU Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU and its amending Directive (EU) 2015/863, and carries the CE-marking.

The described product has been assessed and determined compliant with the following standards:

  • SAFETY: EN IEC 62368-1:2020+A11:2020, EN 62479:2010
  • EMC: EN 55032:2015+A1:2020, EN 55035:2017+A11:2020, EN IEC 61000-3-2:2019+A1:2021, EN 61000-3-3:2013+A1:2019+A2:2021, ETSI EN 301 489-1 V2.2.3(2019-11), ETSI EN 301 489-17 V3.2.4(2020-09)
  • Radio: ETSI EN 300 328 V2.2.2 (2019-07)
  • RoHS: EN IEC 63000:2018

SUPPLEMENTARY INFORMATION: This product has been tested and found to comply with the electromagnetic compatibility (EMC) limits for a Class B digital device pursuant to the listed directives, regulations and standards. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential or business environment. The equipment was tested in a typical configuration.

Date of Issue: January 25, 2024

14. Trademarks

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Zhuhai Quin Technology Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.

Apple, the Apple logo, iPhone, iPad, iPod, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.

Android and Google Play are trademarks of Google Inc. Google and Google Logo are registered trademarks of Google Inc.

15. Special Notes

The company assumes full responsibility for the revision and explanation of this manual, exercising utmost diligence to guarantee its accuracy. Nevertheless, please note that any technical improvements to the product may not be separately notified, and that the images of the product, accessories, software interfaces, etc. in this manual serve solely as illustrations and references. Due to product updates and upgrades, the actual product may vary slightly from the images. Please refer to the physical product for accurate representations.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.