MANUALS+

Adult content warning

FREDORCH Dual Control Sex Machine Instruction Manual

Why this warning: This page discusses adult sexual products and may include explicit descriptions or images.

Leave this page

FREDORCH F7S/FR2

Contents

FREDORCH Dual Control Sex Machine Instruction Manual

Brand: FREDORCH

Models: F7S, FR2

1. Introduction

Welcome to the FREDORCH Dual Control Sex Machine instruction manual. This guide provides essential information for the safe and effective setup, operation, and maintenance of your F7S or FR2 model sex machine. Please read this manual thoroughly before using the product to ensure optimal performance and safety.

2. Safety Information

  • Always ensure the machine is placed on a stable, flat surface before operation.
  • Keep hands and loose clothing clear of moving parts during operation to prevent mechanical injury.
  • Do not immerse the machine or its electrical components in water. Clean attachments separately.
  • Use only the provided power adapter. Ensure the power input matches the specifications (100-240V, 1.5A 50-60Hz).
  • Disconnect power when not in use, during cleaning, or when changing attachments.
  • This product is intended for adult use only.

3. Package Contents

The basic package includes the following items. Please note that the number of accessories may vary based on your specific purchase. What you see in your purchased product image is what you get.

  • 1 x F7S OR FR2 Sex Machine
  • 2 x T-Bar (Frame support)
  • 1 x Tie rod with "quick joint" (for FR2 model)
  • 2 x Tie rods with "quick joint", one shorter (30cm), the other longer (50cm) (for F7S model)
  • 1 x Power supply package (with plug suitable for your country)
  • 1 x Speed controller (wired)
  • 1 x Instructions and hidden packaging

4. Setup

4.1. Assembly

  1. Attach the T-Bars (frame supports) to the main machine body. Ensure they are securely fastened to provide a stable base.
  2. Insert the appropriate tie rod(s) into the machine's mechanism. The F7S model uses two tie rods (one shorter, one longer), while the FR2 model uses one.
  3. Secure any retaining clips or clamps as shown in the diagrams to fix the components in place.
Assembled FREDORCH 120W F7S Sex Machine with power adapter and wired controller
Figure 1: Assembled 120W F7S Sex Machine
Short and long tie rods for the F7S model
Figure 2: Short and Long Tie Rods for F7S
Video 1: Product demonstration showing assembly and adjustment features.

4.2. Power Connection

Connect the power adapter to the machine and then plug it into a suitable electrical outlet. Ensure the power supply matches the machine's requirements.

5. Operation

5.1. Control Methods

Your FREDORCH sex machine offers both wired and wireless control options, or a combination of both, depending on your model.

Wired Control

Use the included wired speed controller. The knob allows for infinitely variable speed adjustment. The line length is 2 meters for flexible positioning.

Wired speed controller with a knob
Figure 3: Wired Speed Controller

Wireless Remote Control

The wireless remote control features buttons for speed adjustment (+up, -down), pause (stop), and mode selection (multiple frequency). The mode key allows you to switch between 20 different classic frequency conversion modes.

Wireless remote control with buttons for speed and mode
Figure 4: Wireless Remote Control

Dual Control

Some models offer dual control, allowing you to use both the wired speed controller and the wireless remote simultaneously for enhanced flexibility.

Comparison of wired and wireless control options
Figure 5: Wired and Wireless Control Options

5.2. Adjustments

Stroke Distance Adjustment

The stroke length can be adjusted from 1-15cm (F7S) or 3-9cm (FR2) using the regulator. This allows for arbitrary adjustment to change the distance. The high-end professional custom flange disc uses a crescent adjustment method for super tight locking and increased fixed strength.

Angle and Height Adjustment

The machine supports multi-angle and height adjustments, ranging from -45° to 90° vertically. This allows for various postures such as Doggy Style, Cowgirl & Standing, and Missionary, fulfilling diverse needs.

Machine adjusted to various angles for different postures
Figure 6: Multi-Angle and Height Adjustment

Anti-Rotation Interface

The machine features an anti-rotation interface for more stable and faster attachment changes.

Close-up of the anti-rotation quick connect interface
Figure 7: Anti-Rotation Interface

5.3. APP Operation (for APP Version Model)

  1. Download Software: Scan the QR code provided in the manual (or on the product packaging) with your mobile phone to download the dedicated APP. Open it in your browser to complete the download.
  2. Account Registration and Login: Apple mobile phone users can log in directly with their Apple ID. Other users need to register an account using their email and password.
  3. Connect Device: Turn on Bluetooth on your phone. Open the APP, go to the main interface, and click "Add Device". Scan the device code or enter the binding code 1150009. Once "Connection Successful" is displayed, the device is ready for use.
  4. Operating Modes:
    • Official Mode: Select from pre-set frequency conversion modes provided by the system.
    • Remote Mode: Control the machine remotely. You can generate an invitation code to allow another user to control the machine via their APP.
    • Shake Mode: Control the machine's speed by shaking your phone.
    • Audio Mode (Voice Control): Activate voice control by saying "Xiao Yi, Xiao Yi". The machine's speed will adjust based on your voice volume (louder voice = faster operation). If the device is idle for more than one minute, you need to reactivate voice control by saying "Xiao Yi" again.
    • Video Mode: Play videos on your mobile phone while the machine operates simultaneously.
    • Swipe Mode: Slide your finger up and down on the screen to change the machine's extension speed. Sliding down sets a low speed, while sliding up sets a high speed. You can save your preferred swipe modes for future use.

5.4. Two-Player Mode

The machine is designed with a double rod socket, allowing two users to play simultaneously.

6. Maintenance

6.1. Cleaning

  • Always disconnect the power before cleaning.
  • Clean the machine's body with a soft, damp cloth. Do not use abrasive cleaners.
  • Clean any attachments (e.g., dildos) thoroughly with warm water and a mild soap or a specialized toy cleaner before and after each use. Rinse well and allow to air dry completely.

6.2. Storage

Store the machine and its accessories in a cool, dry place, away from direct sunlight and extreme temperatures. The original hidden packaging is designed to protect your privacy during storage.

Product standard display and packaging display
Figure 8: Product Packaging for Privacy

7. Troubleshooting

  • Machine not turning on: Check if the power adapter is securely connected to both the machine and the electrical outlet. Ensure the outlet is functional.
  • Machine not moving/responding: Verify that the control method (wired or wireless) is properly connected and selected. For APP control, ensure Bluetooth is on and the device is connected.
  • Unusual noise: A noise level of up to 30dB (whisper close) is normal during operation. If you experience excessively loud or unusual sounds, discontinue use and contact support.

8. Specifications

8.1. 120W F7S Sex Machine

  • Electrical Input: 100-240V, 1.5A 50-60Hz
  • Electrical Output: 24V DC 5A
  • Noise Level: Up to 30 dB (whisper close)
  • Peak Torque: 300NCM
  • Stroke Length: 3-15 cm
  • Speed: 0-300 times/min (0-5 r/s)
  • Product Material: Stainless steel + aluminum alloy (main machine made of aluminum alloy 6061 & 7075)
  • Machine Size: Approximately 85cm x 45cm x 35cm
  • Adjustable Angle: -45 degrees to +90 degrees
  • Product Weight: Approximately 8kg
Dimensions and weight of the 120W F7S machine, along with noise level chart
Figure 9: 120W F7S Dimensions, Weight, and Noise Levels

8.2. 80W FR2 Sex Machine

  • Power: 80W turbo gear motor
  • Speed: 0-300/min infinitely variable speed
  • Remote Mode: 20 frequency conversion functions
  • Telescopic Distance: 3-9 cm
  • Torque: 2.6Nm
  • Output Voltage: 24V
  • Input Voltage: 100-230V
  • Machine Packing Weight: 3.9kg

8.3. General Specifications

  • Material: Metal
  • Power Mode: Plug-in type
  • Control Method: Remote control (wired and/or wireless)
  • Certification: CE
Various dildo and attachment sizes
Figure 10: Various Dildo and Attachment Sizes

9. User Tips

  • Many users find the machine to be highly satisfying and enjoyable.
  • The product is often delivered in neutral packaging, ensuring discretion.
  • Experiment with different angles and stroke lengths to find your preferred settings. The adjustable features are designed for versatility.
  • For APP users, remember to reactivate voice control with "Xiao Yi, Xiao Yi" if the device has been idle for more than one minute.

10. Warranty and Support

For detailed warranty information, troubleshooting guides, and further support, please refer to the comprehensive user manual included in your package. A digital version of the user manual is also available in PDF format: User Manual (PDF).

10.1. Privacy Note

Your privacy is important. The product packaging does not contain sensitive text to ensure your privacy. We protect your personal details and do not share them with third parties without your consent.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.