EVYVKV QX610

Contents

EVYVKV Imax B6AC V3 Smart Digital Balance Charger Instruction Manual

Model: QX610

1. Introduction

The EVYVKV Imax B6AC V3 is an advanced multi-function smart digital balance charger/discharger designed for various battery types used in RC models and other applications. It features a built-in AC adapter for convenience and offers comprehensive charging capabilities for Li-ion, LiPo, LiFe, LiHV, NiMH, NiCd, and Pb batteries. This charger incorporates intelligent charging functions, automatic battery identification, and internal resistance measurement, ensuring safe and efficient battery management.

Key features include:

  • Dual power input (AC 100-240V and DC 11-18V)
  • Support for various battery chemistries: LiPo, LiFe, Li-ion, LiHV, NiMH, NiCd, Pb
  • Integrated balance charger for Li-Po, Li-ion, LiFe, LiHV batteries
  • Automatic identification of battery cell count
  • Internal resistance measurement
  • Multiple safety protection features

2. Safety Information

WARNING: Failure to follow these safety instructions can result in fire, property damage, or personal injury.

  • Always operate the charger in a well-ventilated area, away from flammable materials.
  • Never leave the charger unattended while in use.
  • Ensure the correct battery type and charging parameters are selected before starting a charge cycle. Incorrect settings can damage batteries and pose a fire hazard.
  • Do not attempt to charge damaged or swollen batteries.
  • Keep the charger away from water, moisture, and extreme temperatures.
  • Use only the provided cables and accessories.
  • This charger is not a toy. Keep out of reach of children.
Safety features of the Imax B6AC V3 charger

Figure 1: Charger Safety Features. The charger includes Reverse Polarity Protection, Short Circuit Protection, Over-Charge Protection, Over-Current Protection, and Over-temperature Protection.

3. Package Contents

Please check the package contents upon receipt to ensure all items are present and undamaged:

  • 1x EVYVKV Imax B6AC V3 Battery Balance Charger
  • 1x Power Cable (AC input cable)
  • 1x Cable Set, typically including:
    • JST connector cable
    • T-plug male connector cable
    • XT60 head connector cable
    • Alligator clip cable (for connecting to various battery terminals)
Diagram of Imax B6AC V3 package contents

Figure 2: Product List. Shows the balanced charger, JST cable, T plug male cable, power cord, XT60 head cable, and packing box.

4. Specifications

FeatureSpecification
Input VoltageDC: 11-18V, AC: 100-240V (B6AC)
Charge Current Range0.1-6.0A
Discharge Current Range0.1-2.0A
Max. Charge Power80W
Max. Discharge Power5W
Balance Current200mA
LiPo/LiHv/Li-ion/LiFe Cell Count1-6 cells
NiMH/NiCd Cell Count1-15 cells
Pb Battery Voltage2-20V
Temperature Sensor PortYes
Built-in BalanceYes
Dimensions (L*W*H)210*165*50mm
Weight750g
MaterialMetal
Batteries IncludedNo (Charger does not contain internal batteries)
Battery compatibility chart for Imax B6AC V3 charger

Figure 3: Wide Battery Type Compatibility. The charger supports Li-ion, LiPo, LiFe (1S-6S), NiMH/NiCd (1S-15S), and PB (2V-20V) batteries.

Dimensions of the Imax B6AC V3 charger

Figure 4: Charger Dimensions. The charger measures 210mm x 165mm x 50mm.

5. Setup

Follow these steps to set up your Imax B6AC V3 charger:

  1. Unpack: Carefully remove all components from the packaging.
  2. Power Connection:
    • AC Power (100-240V): Connect the provided AC power cable to the AC input port on the side of the charger and then plug it into a suitable wall outlet.
    • DC Power (11-18V): Alternatively, for DC input, connect a DC power source (e.g., a car battery or a dedicated DC power supply) to the DC input ports on the side of the charger. Ensure correct polarity.
  3. Initial Power On: Once connected to power, the charger's LCD screen should illuminate, indicating it is ready for operation.
Imax B6AC V3 charger with various power plugs

Figure 5: Power Connection Options. The charger supports various AC plug types (USA, AU, EU, UK) and DC input.

Dual power intelligent charging feature of Imax B6AC V3

Figure 6: Dual Power Input. The charger can be powered by both AC (100-240V) and DC (11-18V) sources.

6. Operating Instructions

The Imax B6AC V3 features an intuitive interface for selecting charging modes and parameters.

Detailed interface of Imax B6AC V3 charger

Figure 7: Interface Details. Labels include LCD display, Balanced Lead Receptacle (JST-XH Port), AC input, Temperature sensor port, Battery Type/Stop Selection buttons, Decrease (Dec) button, Increase (Inc) button, Start/Determine button, and Output charging line (4mm banana plug) port.

6.1. Navigating the Menu

  • Battery Type/Stop Selection: Use this button to cycle through different battery types (LiPo, NiMH, Pb, etc.) and to stop an ongoing process.
  • Dec (Decrease): Decreases the selected value or moves backward in menu options.
  • Inc (Increase): Increases the selected value or moves forward in menu options.
  • Start/Determine: Confirms a selection or starts a charging/discharging process. Long-press to confirm some settings.

6.2. Connecting a Battery

  1. Identify the correct charging cable for your battery (e.g., XT60, T-plug, JST).
  2. Connect the main charging cable to the "OUTPUT" port (4mm banana plug) on the charger.
  3. For LiPo/LiFe/Li-ion/LiHV batteries, also connect the balance lead of the battery to the appropriate JST-XH balance port on the charger. This is crucial for balanced charging and safety.
  4. Connect the other end of the main charging cable to your battery. Ensure correct polarity.

6.3. Charging a Battery (Example: LiPo Balance Charge)

  1. Select Battery Type: Press the "Battery Type/Stop Selection" button until "LiPo BATT" appears on the LCD.
  2. Select Program: Press "Start/Determine" to enter the LiPo program menu. Use "Inc" or "Dec" to select "LiPo BALANCE".
  3. Set Current and Cells: Press "Start/Determine" again. The current setting will blink. Use "Inc" or "Dec" to adjust the charge current (e.g., 2.0A for a 2000mAh battery). Press "Start/Determine" to move to cell count. The charger may automatically detect the cell count; verify it matches your battery (e.g., 3S for a 3-cell LiPo).
  4. Confirm and Start: Long-press "Start/Determine". The charger will display a confirmation message (e.g., "CONFIRM (3S) S:3P"). Press "Start/Determine" once more to begin the charging process.
  5. Monitor: The LCD will display real-time charging information, including current, voltage, and elapsed time.
  6. Stop: To stop charging at any time, press the "Battery Type/Stop Selection" button.

6.4. Other Functions

The charger supports various other functions accessible through the menu:

  • Discharge: Discharges the battery to a set voltage.
  • Storage: Charges or discharges LiPo/LiFe/Li-ion/LiHV batteries to their optimal storage voltage.
  • Fast Charge: Charges LiPo/LiFe/Li-ion/LiHV batteries quickly without balancing. Use with caution.
  • Re-Peak (NiMH/NiCd): Cycles NiMH/NiCd batteries to optimize performance.
  • Internal Resistance Measurement: Allows you to check the internal resistance of your battery cells.

7. Maintenance

  • Cleaning: Keep the charger clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use solvents or abrasive cleaners.
  • Storage: Store the charger in a cool, dry place when not in use.
  • Cable Inspection: Regularly inspect all cables and connectors for signs of wear, damage, or corrosion. Replace damaged cables immediately.
  • Ventilation: Ensure the charger's ventilation holes are not blocked during operation to prevent overheating.

8. Troubleshooting

ProblemPossible CauseSolution
Charger does not power onNo power supply; faulty power cable; incorrect input voltage.Check power connections and wall outlet. Ensure correct AC/DC input voltage. Try a different power cable if available.
"CONNECTION BREAK" errorBattery not connected properly; faulty cable.Ensure main charging cable and balance lead (if applicable) are securely connected to both charger and battery. Inspect cables for damage.
"CELL ERROR" or incorrect cell count detectedIncorrect battery type selected; balance lead not connected (for LiPo/LiFe/Li-ion/LiHV); damaged battery.Verify the selected battery type matches the connected battery. Ensure the balance lead is connected for multi-cell lithium batteries. Check battery condition.
Charger gets hot during operationNormal operation (some heat is expected); poor ventilation; excessive charge current.Ensure adequate ventilation around the charger. Reduce charge current if overheating is severe. If temperature protection activates, allow to cool.
Charging process stops prematurelyBattery full; safety protection triggered (e.g., over-temperature, over-voltage); poor connection.Check battery voltage. Review error messages on the LCD. Ensure connections are secure.

9. User Tips

  • Always Balance Charge Lithium Batteries: For LiPo, LiFe, Li-ion, and LiHV batteries, always use the balance charge mode. This ensures all cells are charged equally, prolonging battery life and improving safety.
  • Verify Settings: Double-check the battery type, cell count, and charge current settings before starting any process. A small mistake can lead to serious issues.
  • Monitor Battery Temperature: While the charger has over-temperature protection, it's good practice to periodically check the battery's temperature during charging, especially for high-current charges.
  • Storage Mode for Lithium Batteries: If you plan to store your lithium batteries for an extended period, use the "Storage" mode. This charges/discharges them to an optimal voltage (typically 3.85V/cell for LiPo) to prevent degradation.
  • Understand C-Rating: When setting charge current, remember that 1C for a 2000mAh battery is 2.0A. Avoid charging above the battery's recommended C-rating.

10. Warranty and Support

For any issues not covered in this manual, or for warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.