1. Introduction
The ANCEL BM700 Pro is a specialized diagnostic tool designed for BMW, MINI, and Rolls-Royce vehicles, offering comprehensive full-system diagnostics and a wide range of reset functions. It also provides standard OBD2 diagnostic capabilities for all OBD2 compliant vehicles. This manual provides detailed instructions on how to set up, operate, and maintain your BM700 Pro scanner.
Figure 1: ANCEL BM700 Pro OBD2 Scanner
2. Key Features
- Display: 2.8-inch TFT 262K true color LCD screen for clear test results.
- Interface: Silicone keypad for easy navigation, rugged drop-proof case.
- BMW/MINI/Rolls-Royce Specific: Full system diagnostics and special functions for ABS/ASC/DSC.
- OBD2 Compatibility: Reads engine fault codes for all OBD2 compliant vehicles (engine system only).
- Multi-language Support: Menu available in English, French, Spanish, German, Russian, Swedish, Portuguese, Finnish, Norwegian, Danish.
- Updates: Lifetime free online software updates.
- Efficiency: Hotkey for I/M Readiness and DTC lookup for faster scanning.
Video 1: ANCEL BM700 Pro Product Overview
3. Vehicle Compatibility
The ANCEL BM700 Pro is compatible with a wide range of BMW, MINI, and Rolls-Royce vehicles. Refer to the table below for specific chassis series and years of manufacture.
Figure 2: Vehicle Compatibility Chart
Detailed Compatibility List:
- 1 Series Chassis: E81/E82/E87/E88/F20/F21/F52
- 2 Series Chassis: F22/F23/F45/F46/F87
- 3 Series Chassis: E30/E36/E46/E90/E91/E92/E93/F30/F31/F34/F35/F80/G20
- 4 Series Chassis: F32/F33/F36/F82/F83
- 5 Series Chassis: E28/E34/E39/E60/E61/F07/F10/F11/F18/F90/G30/G31/G38
- 6 Series Chassis: E24/E63/E64/F06/F12/F13/G32
- 7 Series Chassis: E23/E32/E38/E65/E66/E67/E68/F01/F02/F03/F04/G11/G12
- 8 Series Chassis: E31/G14/G15/G16
- X Series Chassis: X1 E84 F48 F49 / X2 F39 / X3 E83 F25 G01 / X4 F26 G02 / X5 E53 E70 F15 F85 G05 / X6 E71 E72 F16 F86 / X7 G07
- Z Series Chassis: Z1 E30 Z3 E36 / Z4 E85 E86 / Z4 E8 / Z8 E52
- I Series Chassis: I3 I01 / I8 I12
- MINI Series Chassis: R50/R52/R53/R55/R56/R57/R58/R59/R60/R61/F54/F55/F56/F60
- Rolls-Royce Series Chassis: RR1/RR2/RR3/RR4/RR5
4. Setup and Initial Use
4.1 Package Contents
Before starting, ensure all items are present in the package:
Figure 3: ANCEL BM700 Pro Package Contents
- ANCEL BM700 Pro Scanner Unit
- Operation Prompt Card
- User Manual (this document)
- USB Data Line
4.2 Connecting the Scanner
- Locate the OBD2 port in your vehicle. This is typically found under the dashboard on the driver's side.
- Plug the ANCEL BM700 Pro's diagnostic cable into the vehicle's OBD2 port.
- The scanner will power on automatically.
4.3 Language Settings
The device supports multiple languages. To change the language:
- From the main menu, navigate to "Tool Setup".
- Select "Language".
- Choose your desired language from the list (English, French, Spanish, German, Russian, Swedish, Portuguese, Finnish, Norwegian, Danish).
Figure 4: Multi-language Menu
5. Operation
5.1 OBD-Level Diagnostics (Universal)
This mode provides standard OBD2 functions applicable to all OBD2 compliant vehicles (engine system only).
- Read Codes: Displays Diagnostic Trouble Codes (DTCs) and their definitions.
- Erase Codes: Clears DTCs from the vehicle's computer and turns off the Malfunction Indicator Light (MIL).
- I/M Readiness: Checks the readiness of the emission-related systems.
- Data Stream: Displays live data parameters from the vehicle's sensors.
- EVAP System Test: Initiates a test of the Evaporative Emission Control System.
- Vehicle Information: Retrieves vehicle identification number (VIN), calibration ID, and calibration verification number (CVN).
Figure 5: Powerful OBD2 Mode Interface
Figure 6: One-Click I/M Readiness
Figure 7: Live Datastream Monitoring
5.2 BMW/MINI/Rolls-Royce Full System Diagnostics
The BM700 Pro can diagnose faults in nearly every system of compatible BMW Group vehicles.
Figure 8: Full-System Scan Tool Capabilities
Supported systems include, but are not limited to:
- Engine System: Identifies engine problems and clears engine lights.
- Transmission System: Diagnoses transmission issues.
- Airbag (SRS) System: Reads/clears airbag codes and turns off warning lights.
- ABS System: Controls braking force, turns off ABS light, and locates fault locations.
- Battery System: Evaluates charge level, monitors short circuit current, and registers battery changes.
- DPF System: Retrieves/clears DPF-related codes and resets DPF light.
- Oil System: Resets service lamps after oil changes.
- Immobilizer System: Helps maintain vehicle security.
- TPMS (Tire Pressure Monitoring System)
- SAS (Steering Angle Sensor)
- ESP (Electronic Stability Program)
- Suspension System
- Drivetrain
Figure 9: All-System Diagnosis for BMW Group Vehicles
5.3 Reset Services
The BM700 Pro offers a comprehensive suite of reset and correction functions:
Figure 10: Hot Reset Services Overview
- SRS Reset: Clears airbag warning lights.
- ABS Reset: Activates or controls the anti-lock brake system temporarily.
- EPB Reset: Resets brake pads after electronic parking brake system repairs.
- SAS Reset: Calibrates the steering angle sensor.
- DPF Reset: Clears particulate matter from the DPF filter.
- BMS Reset: Re-matches the control module and motoring sensor for accurate battery detection.
- Oil Reset: Resets service lamps on the instrument cluster after an oil change.
- Injector Coding: Codes new injector numbers when replacing injectors.
- CBS Reset/Correct: Resets BMW's Condition Based Servicing system for components like oil life, cabin air filter, brake pads, brake fluid, and spark plugs.
- EGC Clear Adaption: Helps with automatic gearbox maintenance.
- Fuel Pump Reset: (For F series chassis only) Resets the fuel pump after ensuring no fuel leaks.
- Transmissions Learning: Adapts the automatic transmission to driving patterns for better performance and longevity.
- Digital Motor Electronics (DME) Functions: Includes Injector Coding (IQA), idle speed adjustment, fuel injection rate, CO adjustment, Exhaust Gas Recycling, and engine clear adaption.
Figure 11: Advanced Reset Functions
Figure 12: Additional Advanced Features
5.4 Battery Registration & Testing
When replacing a vehicle battery, it is crucial to register the new battery with the vehicle's system. The BM700 Pro simplifies this process.
- Step 1: Identify if the existing battery is dead or needs replacement.
- Step 2: Replace the original battery with a new one (original or same type).
- Step 3: On the BM700 Pro, navigate to the "BAT" or "BMS Reset" menu and choose the battery registration option.
- Step 4: Enter the 12-digit code of the new battery when prompted.
- Step 5: Press the "OK" button to complete the registration.
Figure 13: Quick Battery Reset Steps
Figure 14: BMW Battery Registration & Testing Process
6. Maintenance
- Keep the device clean and free from dust and moisture.
- Avoid dropping the device or exposing it to extreme temperatures.
- Store the device in a safe place when not in use.
- Do not attempt to disassemble the device, as this will void the warranty.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Not properly connected to vehicle's OBD2 port; vehicle's ignition is off. | Ensure secure connection to OBD2 port. Turn vehicle ignition to ON position (engine off). |
| Communication error with vehicle. | Loose connection; incompatible vehicle; faulty OBD2 port. | Check connection. Verify vehicle compatibility (refer to Section 3). Try on another compatible vehicle if possible. |
| Screen freezes or device is unresponsive. | Software glitch; temporary error. | Disconnect the device from the vehicle, wait a few seconds, then reconnect. If issue persists, perform a software update (refer to Section 9). |
8. User Tips
- For BMW E46 COMPACT 320D 150CV from 2002 (Diesel), the BM700 Pro is confirmed to be valid for diagnostics.
- Always ensure your vehicle's ignition is in the 'ON' position (engine off) when performing diagnostics or resets, unless otherwise specified by a particular function.
- When performing battery registration, double-check the 12-digit code of the new battery for accuracy.
9. Specifications
| Feature | Detail |
|---|---|
| Brand Name | ANCEL |
| Model | BM700 Pro |
| Item Type | Code Readers & Scan Tools |
| Software Version | BM700 Pro |
| Software Update | Yes (Lifetime Free) |
| Certification | CE |
| Origin | Mainland China |
| Display | 2.8" TFT 262K true color LCD |
| Package Weight | 0.42 kg |
| Package Dimensions (L x W x H) | 10cm x 10cm x 10cm (approximate) |
10. Warranty and Support
10.1 Software Updates
The ANCEL BM700 Pro offers lifetime free software updates to ensure compatibility with new vehicle models and to add new features. To update your device:
- Visit the official ANCEL website to download the client update tool software.
- Connect your BM700 Pro device to your computer using the provided USB cable.
- The update software is compatible with Windows 7/8/10. For Windows 7, you may need to install the driver by clicking "install driver.bat" in the driver file. Windows 8/10 can run the update software directly.
- Double-click "Update.exe" and follow the on-screen instructions to complete the update process.
Figure 15: Software Update Process
10.2 Technical Support
For technical assistance, troubleshooting, or further inquiries, please contact ANCEL customer support through their official website or the contact information provided with your purchase.
