1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your JIKONG Smart Active Balance Battery Management System (BMS). This intelligent power management system is designed for 8S-24S series batteries, compatible with Li-ion, LiFePo4, and LTO battery types, offering advanced protection and balancing features. It is suitable for a wide range of applications including electric vehicles, energy storage systems, and portable power solutions.
2. Key Features
- Intelligent Active Balancing: Full-time active balancing for lossless energy redistribution, real-time cell temperature monitoring via distributed NTC, high-precision balancing for improved system energy efficiency and increased battery life.
- Wide Battery Compatibility: Supports 8S-24S series batteries, compatible with Li-ion, LiFePo4, and LTO battery types.
- Robust Design: High-quality appearance and high-efficiency performance, featuring high-standard core components like high-performance MOS transistors and low RDS(on) SGT MOSFETs (<10mΩ) for core control, ±2mV voltage sampling accuracy, and <100µs short-circuit protection.
- Advanced Protection: Includes Overcharge Protection, Over Discharge Protection, Overcurrent Protection, and Short Circuit Protection.
- Rich Interface & Communication: Supports CAN, RS485, Bluetooth (BT), NTC, Soft Switch, SOC Indicator, Key Switch, and Active Equalizer. Compatible with mainstream inverter communication protocols (e.g., Deye, Pylontech, Growatt, Victron Energy, INVT, Voltronic Power, SNE, MUST).
- Multi-Platform Support: Dedicated APP supports cross-platform access (Android, iOS, HarmonyOS) for real-time data monitoring (voltage, temperature, SOC), dynamic parameter configuration, and multi-level alarm push functions.
- PC Software: Intelligent interconnection via UART/RS485/CAN cables for PC host, offering real-time data viewing, comprehensive functions, calibration, and firmware updates.
- Optional LCD Touch Screen: Available 3.2-inch or 4.3-inch LCD touch screen for parallel monitoring, touch settings, real-time status display, and upgraded functions.
- Durable Construction: High-precision aluminum alloy die-casting process with micro-arc oxidation (MAO) + PVD vacuum coating for double protection, controlling BMS temperature rise, corrosion resistance, and structural strength.
3. Package Contents
Upon opening your JIKONG Smart Active Balance BMS package, please verify that all the following items are included:
- BMS Unit (x1)
- Switch (x1, 50cm long)
- NTC Temperature Sensor (x1, 40cm long)
- Sampling Line B (x1, 70cm long)
- Sampling Line A (x1, 70cm long)
- Packaging Box (x1)


4. Setup and Installation
4.1 General Wiring Principles
- First, connect the main power cables: B- (battery negative), P- (load/charger negative), and B+ (battery positive).
- Next, carefully insert the battery sampling cable (balance wires) into the BMS connector. Ensure the wires are connected in order from the lowest cell voltage to the highest cell voltage (e.g., 1S, 2S, 3S...).
- After all cables are correctly connected, activate the BMS by powering it on.
- Once the BMS is active and all connections are verified, connect your load and charger.
- When disassembling the system, always disconnect the charger and load first. Then, unplug the battery sampling cable in reverse order (from highest cell to lowest cell). Finally, disconnect B+, P+, and B-.
4.2 Wiring Diagrams
Refer to the following diagrams for specific wiring configurations based on your battery string count:



4.3 Interface Connections
The JIKONG BMS features a variety of ports for communication and external components:

- CAN/RS485 Port: For CAN bus and RS485 communication.
- NTC Port: For connecting the NTC temperature sensor.
- GPS Port: For GPS module connection (if applicable).
- Display/Switch Port: For connecting an optional LCD display or external switch.
- Hot Port: For connecting the heating function (if equipped).
- Sampling Port A & B: For connecting the battery sampling lines.

4.4 App Installation
The JIKONG BMS dedicated APP supports cross-platform (Android/iOS/HarmonyOS) access. Scan the QR code on the BMS unit or refer to the product packaging for the official app download link. Follow the on-screen instructions to complete the installation.
5. Operating Instructions
5.1 Mobile App Usage
The mobile app provides real-time data monitoring (voltage, temperature, SOC, etc.), dynamic parameter configuration, and multi-level alarm push functions. It supports multi-terminal collaborative operations and integrates multi-language switching modules for global usage.


5.2 PC Software Usage
Communication cables (UART/RS485/CAN) enable intelligent interconnection with a host PC. The PC software offers simple operation, real-time viewing of all data, comprehensive functions, and setting calibration capabilities, supporting firmware updates and upgrades.


5.3 LCD Touch Screen (Optional)
If equipped, the 3.2-inch or 4.3-inch LCD touch screen allows for parallel monitoring, touch settings, real-time status display (voltage, capacity), and access to upgraded functions. Long press the power button to turn on or turn off the BMS.


6. Maintenance
- Cleaning: Keep the BMS clean and free from dust and moisture. Use a dry, soft cloth for cleaning.
- Connection Checks: Regularly inspect all wiring connections for tightness and corrosion. Loose connections can lead to poor performance or damage.
- Ventilation: Ensure adequate airflow and proper ventilation around the BMS to prevent overheating, especially during high load operations.
- Software Monitoring: Periodically check the mobile app or optional LCD display for any error codes, warnings, or unusual readings. Address any alerts promptly.
- Firmware Updates: Check for and install firmware updates via the PC software to ensure the BMS operates with the latest features, bug fixes, and performance improvements.
7. Troubleshooting
- No Power/No Display:
- Check all main power connections (B-, P-, B+).
- Ensure the battery sampling cable is correctly inserted and secure.
- Verify the main power switch (if installed) is in the 'ON' position.
- Balancing Issues:
- Ensure all individual cell voltages are within the specified operating range.
- Check for loose or damaged sampling lines.
- The active balancing feature works continuously; allow time for it to equalize cells.
- Overcharge/Over-discharge Protection Triggered:
- The BMS will automatically cut off charging/discharging if voltage limits are exceeded.
- Check battery cell health and ensure your charger/load settings are appropriate for your battery type.
- Overcurrent/Short Circuit Protection Triggered:
- The BMS will protect against excessive current.
- Check for any short circuits in the system or an excessive load. Reduce the load if necessary.
- Communication Failure (App/PC):
- Verify all RS485/CAN/Bluetooth connections are secure.
- Ensure the mobile app or PC software is updated to the latest version.
- Check that the correct communication protocol is selected in the software settings.
- Temperature Warnings:
- Ensure the BMS and battery are operating within their specified temperature ranges.
- Check for proper cooling and ventilation around the system.
- If equipped, ensure the heating function is operating correctly in low-temperature environments.
8. Specifications
The JIKONG Smart Active Balance BMS offers various configurations. The following table outlines general specifications, with specific values depending on the model (e.g., JK-BD6A24S12P, JK-B1A8S10P, etc.) and current rating.
| Feature | Description/Value |
|---|---|
| Brand Name | JIKONG |
| Type | LIFEPO4 Battery BMS (also supports Li-ion / LTO) |
| Hardware or Smart | SMART BMS |
| Usage Scenario | Power BMS, Energy Storage BMS |
| Certification | CE, FCC, RoHS, UL |
| Origin | Mainland China |
| Battery Series | 4S-24S (Li-ion/LiFePo4/LTO dependent on model) |
| Charging Current | Up to 300A (Optional: 40A, 60A, 80A, 100A, 150A, 200A, 300A) |
| Balance Function | Active Balanced BMS |
| Balancing Current | 0.6A - 2A (model dependent) |
| Charge and Discharge Port | Common Port BMS |
| Continuous Discharge Current | 40A - 300A (model dependent) |
| Maximum Discharge Current | Up to 400A (model dependent) |
| Over Charge Protection Current | 10-100A (ADJ) |
| Single Cell Voltage Range | 1-5V |
| Voltage Acquisition Accuracy | ±5mV |
| Over Charge Protection Voltage | 1.2-4.35V (ADJ) |
| Over Charge Release Voltage | 1.2-4.35V (ADJ) |
| Over Current Detect Delay | 2-120S (ADJ) |
| Over Discharge Protection Voltage | 1.2-4.35V (ADJ) |
| Over Discharge Release Voltage | 1.2-4.35V (ADJ) |
| Quantity of Temperature Detection | Two groups |
| Function | Overcharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection |
| Other Features | Temperature protection, Heating Function, Support Parallel Connection, Coulomb Counter |
| Adapting System | Android or iOS Harmony (App) |
| Supported Interfaces | RS485/CAN/Heat/APP/BT (RS232/UART also supported) |
| Dimensions (JK-BD6A24S12P) | 162mm (L) x 102mm (W) x 16.6mm (H) (Note: Data tolerance range is ±2mm) |




9. User Tips
- Secure Connections: Always double-check all wiring connections for tightness and proper polarity before powering on the BMS to prevent damage to the unit or battery pack.
- App Monitoring: Regularly utilize the mobile app for real-time monitoring of individual cell voltages, temperatures, and overall battery state of charge (SOC). This helps in identifying potential issues early.
- Parameter Adjustment: Take advantage of the app's parameter adjustment features to fine-tune settings for optimal battery performance and longevity, especially when integrating with different battery chemistries or system requirements.
- Firmware Updates: Periodically check for and install firmware updates through the PC software. Updates often include performance enhancements, new features, and critical bug fixes.
- Environmental Considerations: Ensure the BMS is installed in a well-ventilated area, protected from extreme temperatures and moisture, to maintain its operational integrity.
10. Warranty and Support
For detailed warranty information, technical support, and service inquiries, please refer to the manufacturer's official website or contact your authorized JIKONG dealer or point of purchase. Please retain your purchase receipt as proof of purchase for any warranty claims.