Loefme Electric Dehumidifier 1000ML

Contents

LOEFME Electric Dehumidifier 1000ML User Manual

Model: Electric Dehumidifier 1000ML

Brand: Loefme

1. Introduction

Thank you for choosing the LOEFME Electric Dehumidifier. This manual provides important information regarding the safe operation, installation, maintenance, and troubleshooting of your new appliance. Please read it thoroughly before use and keep it for future reference.

The LOEFME Electric Dehumidifier is a compact and efficient device designed to remove excess moisture from small spaces, creating a more comfortable and healthier environment. It features quiet operation, a user-friendly interface, and automatic safety functions.

2. Important Safety Instructions

Please read and follow all safety instructions to prevent injury or damage to the appliance.

  • Always ensure the dehumidifier is placed on a stable, level surface.
  • Do not block the air inlet or outlet. Maintain at least 10 cm (4 inches) clearance around the unit.
  • Do not immerse the appliance, cord, or plug in water or other liquids.
  • Unplug the dehumidifier before cleaning or performing any maintenance.
  • Keep out of reach of children and pets.
  • Do not operate the dehumidifier if the power cord or plug is damaged, or if the unit malfunctions or has been dropped.
  • Use only the power adapter supplied with the unit.
  • This appliance is for indoor use only.

3. Product Overview

The LOEFME Electric Dehumidifier is a compact and efficient device designed for small spaces. Key features include:

  • High-efficiency dehumidification (up to 350ml/day)
  • Ultra-quiet operation (below 35dB)
  • 1000ml removable water tank
  • Automatic shut-off when water tank is full
  • 7-color LED ambient light
  • Touch control panel with timer function (4H, 6H, 8H)
  • Compact design suitable for bedrooms, bathrooms, wardrobes, and studies.
LOEFME Electric Dehumidifier with 1000ml water tank and 7-color light
Figure 1: LOEFME Electric Dehumidifier with 1000ml water tank and 7-color light.
Dimensions of LOEFME dehumidifier: 160mm (W) x 130mm (D) x 219mm (H)
Figure 2: Dimensions of the LOEFME dehumidifier, suitable for small spaces.

4. Setup

  1. Unpacking: Carefully remove the dehumidifier from its packaging. Retain the packaging for future storage or transport.
  2. Placement: Place the dehumidifier on a firm, level surface in the desired location. Ensure there is at least 10 cm (4 inches) of clear space around all sides for proper airflow. Avoid placing it near heat sources or in direct sunlight.
  3. Power Connection: Connect the power adapter to the DC input port on the back of the dehumidifier. Plug the other end of the power adapter into a suitable electrical outlet (240V).
  4. Water Tank: Ensure the water tank is correctly inserted into the unit.

5. Operating Instructions

5.1 Control Panel

Control panel of the LOEFME dehumidifier with Power, Light, Sleep, and Timer buttons
Figure 3: Control Panel Overview.
  • Power Button (⏻): Press to turn the unit ON or OFF.
  • Light Button (💡): Press to cycle through the 7-color LED ambient light modes or turn the light off.
  • Sleep Mode Button (☾): Press to activate or deactivate sleep mode. In sleep mode, the dehumidifier operates at its lowest noise level (below 35dB) and the lights are dimmed or off.
  • Timer Button (◷): Press to set the operating timer for 4, 6, or 8 hours. The corresponding indicator light will illuminate. Pressing again will cycle through the options or turn off the timer.

5.2 Basic Operation

  1. Power On: Press the Power button (⏻) to start the dehumidifier. The unit will begin operating in continuous mode.
  2. Setting the Timer: If you wish for the unit to run for a specific duration, press the Timer button (◷) repeatedly until the desired time (4H, 6H, or 8H) is indicated. The unit will automatically shut off after the set time. To disable the timer, press the Timer button until no time indicator is lit.
  3. Activating Sleep Mode: For quiet operation, especially during the night, press the Sleep Mode button (☾). The unit's noise level will be reduced, and the ambient light will adjust.
  4. Using the Ambient Light: Press the Light button (💡) to turn on the 7-color LED ambient light. Each press will cycle through different colors or turn the light off.
  5. Power Off: Press the Power button (⏻) again to turn off the dehumidifier.
Video 1: Demonstration of the dehumidifier's operation, including power, light, sleep mode, and timer functions.

6. Maintenance

6.1 Emptying the Water Tank

The dehumidifier is equipped with a 1000ml water tank and an automatic shut-off feature. When the tank is full, the unit will stop operating, and a red indicator light will illuminate.

  1. Remove Water Tank: Gently pull out the water tank from the front of the unit. The dehumidifier will automatically stop when the tank is removed.
  2. Open Tank Cover: Take off the cover of the water tank.
  3. Pour Out Water: Carefully pour out the collected water.
  4. Replace Tank: Reset the tank cover and slide the empty water tank back into the dehumidifier. Ensure it is securely in place. The unit will resume operation if it was running before the tank was removed.
Instructions for emptying the water tank: remove, open cover, pour water, replace.
Figure 4: Steps to empty and replace the water tank.

6.2 Cleaning

  • Exterior: Wipe the exterior of the dehumidifier with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Air Inlet/Outlet: Periodically check the air inlet and outlet for dust or debris. Use a soft brush or vacuum cleaner to gently remove any blockages.
  • Water Tank: Clean the water tank regularly with mild soap and water to prevent mold or mildew growth. Rinse thoroughly before replacing.

7. Troubleshooting

Problem Possible Cause Solution
Dehumidifier does not turn on.
  • Power cord not properly plugged in.
  • Water tank is full or not correctly inserted.
  • Power outage.
  • Check power connection.
  • Empty water tank and ensure it is securely reinserted.
  • Check household circuit breaker.
No water collected or low dehumidification.
  • Room humidity is too low.
  • Temperature is too low (below 5°C/41°F).
  • Air inlets/outlets are blocked.
  • Unit size is too small for the room.
  • Dehumidifier may not be needed.
  • Dehumidifiers are less effective in cold conditions.
  • Clear any obstructions from air vents.
  • Ensure the dehumidifier is used in an appropriate-sized room (11-20 M²).
Unit is noisy.
  • Unit not on a level surface.
  • Air filter is dirty.
  • Place on a stable, level surface.
  • Clean the air filter (if applicable, though not explicitly mentioned as removable, general advice).
  • Activate Sleep Mode for quieter operation.

8. Specifications

Feature Specification
Brand Name Loefme
Model Electric Dehumidifier 1000ML
Dimensions (L x W x H) 160mm(W) x 130mm(D) x 219mm(H)
Capacity (pints / 24h) 350ml/day (under conditions of 30°C and 80% relative humidity)
Water Tank Capacity 1000 mL
Application Area 11 - 20 M²
Power (W) 22.5W
Voltage 240V
Functions Automatic Bucket Full Shut-Off, Automatic Defrost, Bucket Full Indicator Light, LED Display, Removable Water Tank, 7-Color Light, Timer (4H/6H/8H)
Noise Level Below 35dB
Certification CE
Origin Mainland China

9. User Tips

  • For optimal performance, ensure the room is well-sealed (windows and doors closed) when the dehumidifier is operating.
  • Regularly check and empty the water tank to ensure continuous operation and prevent the unit from stopping due to a full tank.
  • Utilize the sleep mode for undisturbed rest, as it significantly reduces operational noise.
  • The 7-color ambient light can be used as a night light or to add a decorative touch to your space.
  • Position the dehumidifier in areas with higher humidity, such as bathrooms after showers or damp closets, for maximum effectiveness.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact LOEFME customer service through your purchase platform or the official LOEFME website.

Please have your product model and purchase date available when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.