ANYFAR Wireless Carplay Android Auto Module User Manual

1. Introduction

This manual provides detailed instructions for the installation and operation of the ANYFAR Wireless Carplay Android Auto Module. This retrofit kit integrates CarPlay and Android Auto functionalities into your Mercedes Benz vehicle, utilizing the existing display and controls for an OEM-like experience.

1.1 Functional Statement

The module enables seamless interaction between your smartphone and your car's infotainment system. It supports both wireless and wired connections for CarPlay and Android Auto, allowing for voice command and control of phone functions, information, navigation, and music through the central control knob or voice assistant (Siri).

Additionally, the smart module can decode video input, supporting the integration of factory original reverse cameras, parking radar, and aftermarket reverse or 360-degree cameras.

Image: Functional Statement - Shows the module and describes its core functions including CarPlay/Android Auto support and reversing video input capabilities.

2. Compatibility

This module is designed for Mercedes Benz vehicles equipped with the NTG 5.0 or NTG 5.1 system, featuring 7.4”, 8.4”, or 12.3” screens. Please verify your car's system and model year before installation.

2.1 Suitable Models

2.2 Confirm Your Car System (NTG 5.0)

It is crucial to identify your car's NTG system version to ensure compatibility. The module is compatible with NTG 5.0 systems. Refer to the image below for visual identification:

Image: Visual guide to distinguish between NTG 4.0, NTG 4.5, and NTG 5.0 systems. Look for the 'Airbag light at AC air vent' and 'Button 'C' or 'CLR' on the right' for NTG 4.0, 'Button 'CLEAR' on the right' for NTG 4.5, and 'Airbag light under car radio' with 'Flat buttons' for NTG 5.0. Also note the 10PIN vs 4PIN connectors.

If you are unsure, please take photos of your car's center console and contact customer support for assistance.

3. Kit Contents

The package includes the following components:

• ANYFAR Wireless Carplay Android Auto Module (Main Unit)
• Power Cable
• LVDS Cable (1 pcs)
• WIFI Antenna

3.1 Product Dimensions

Image: Product Information - Main module dimensions are approximately 13.6cm (length) x 7cm (width) x 2.2cm (height). Also shows the included Power cable, LVDS cable, and WIFI Antenna.

4. Setup and Installation

Professional installation is recommended. Ensure the vehicle's power is off before beginning installation.

4.1 Toggle Switch (DIP Switch) Settings

The module features DIP switches that must be configured according to your car model and screen size. Locate the DIP switches on the module as shown in the diagram below.

Image: DIP Switch Setup - Shows the location of the DIP switches on the module and a table detailing the correct ON/OFF positions for switches 1-4 based on your Mercedes Benz model (C/GLC/V/S, A/B/CLA/CLS/GLA/GLE/GLS/E) and screen size (800*480 for 7.4"/8.4", 960*540 for 8.4", 1440*540 for 12.3").

4.2 Cable Connection Chart

Carefully follow the wiring diagram to connect the module to your car's system. Ensure all connections are secure to prevent malfunctions.

Image: Cable Connection Chart - Illustrates the connections for LVDS, ANT, POWER, USB, 360 TX/RX, B+, GND, CAM-POWER, REVERSE, ACC-OUT, REAR-CVBS, FRONT-CVBS, and AUX to the OEM radio and OEM LVDS. Ensure proper connection to avoid issues.

After all cables are connected, long press the "Back" button on the car's central knob to switch between the original NTG 5 interface and the new CarPlay/Android Auto interface.

5. Operating Instructions

5.1 Wireless CarPlay Connection

1. Open the system's Wireless CarPlay connection settings on your car's display.
2. On your iPhone, turn on Bluetooth and Wi-Fi and keep them active.
3. Select the Bluetooth device name "CX_BT XXXX" (where XXXX is a unique identifier) from your iPhone's Bluetooth settings.
4. Confirm the pairing request on your iPhone and select "Use CarPlay" when prompted.

Image: Wireless CarPlay Connection Method - Step-by-step visual guide for connecting your iPhone to the module via Bluetooth and Wi-Fi for CarPlay functionality.

5.2 Wireless Android Auto Connection

1. Open the system's Wireless Android Auto connection settings on your car's display.
2. On your Android phone, turn on Bluetooth and Wi-Fi and keep them active.
3. Select the Bluetooth device name "CX_BT XXXX" from your Android phone's Bluetooth settings and pair.
4. After successful Bluetooth pairing, follow the on-screen prompts on your Android phone to complete the Android Auto connection process.

Image: Wireless Android Auto Connection Method - Step-by-step visual guide for connecting your Android phone to the module via Bluetooth and Wi-Fi for Android Auto functionality.

5.3 Audio Settings

To ensure optimal audio quality and functionality, configure the audio settings as follows:

1. Navigate to "Setup" -> "Audio settings" on the car's display.
2. Enable the "Use the original Bluetooth audio" option.
3. Connect your phone's Bluetooth to the car's Bluetooth (labeled as "MB Bluetooth").
4. Keep the "MB Bluetooth" connection active in the Bluetooth Audio interface.
5. On your phone, select the Bluetooth source as "MB Bluetooth" for audio output.

Image: Audio Settings - Visual guide for configuring audio settings, including enabling original Bluetooth audio and connecting to "MB Bluetooth".

5.4 Steering Wheel Button Control

The module integrates with your car's original steering wheel controls for convenient operation. Note that operation methods may vary slightly depending on your specific car model.

Image: Steering Wheel Button Control - Illustrates the functions of the central knob and steering wheel buttons. Key functions include:

• Central Knob:
  1. Long press to switch system.
  2. Short press to confirm; long press to confirm to activate voice control.
  3. Right dial 15 seconds to reset.
• Steering Wheel Buttons:
  1. Long press to switch system.
  2. Short press to answer the phone.
  3. Short press to hang up or activate.
  4. Short press to increase or decrease volume.
  5. Long press to reset the system.

Note: Due to different models, the exact operation method may vary. Please consult customer service if you encounter discrepancies.

6. Key Features

The ANYFAR Wireless Carplay Android Auto Module offers a range of features to enhance your driving experience:

• Wireless & Wired Connectivity: Supports both wireless and wired CarPlay and Android Auto.
• Mirror Link: Allows screen mirroring from your smartphone.
• USB Flash Drive Support: Play media directly from a USB drive.
• Voice Control: Activate Siri or Google Assistant for hands-free operation.
• Navigation: Use GPS navigation apps like Google Maps, Waze, and Apple Maps with live traffic information.
• High-Quality Audio: Built-in DSP with fully adjustable Audio EQ for superior sound.
• Camera Inputs: Two RCA inputs for rear and right PAL, NTSC AHD cameras.
• Parking Assistance: Supports HD 360 panoramic cameras, dynamic guidance lines, and OEM parking style parking distance control.
• Seamless Integration: Retains original car controls (steering wheel, rotary controller) and display.
• Plug and Play: Non-destructive installation without cutting wires.
• Dual System Switch: Easily switch between the original NTG system and the CarPlay/Android Auto interface.
• Bluetooth 5.0: For stable and fast wireless connections.
• Wi-Fi: Built-in 2.4G and 5.8G Wi-Fi for robust connectivity.

Image: Product Features - Icons highlighting core functionalities like CarPlay, Android Auto, AirPlay, Autolink, USB, and Bluetooth.

Image: Wireless CarPlay Smart Module Features - Detailed icons for Bluetooth, CarPlay, Android Auto, Factory Protocol, USB Play, Optional Camera, Lossless Installation, Voice Control, Live Map, and Online Entertainment.

Image: Camera Function - Demonstrates support for factory original reverse camera, parking radar, and aftermarket reverse/360 cameras.

7. Specifications

8. Troubleshooting

If you encounter issues with your ANYFAR Wireless Carplay Android Auto Module, please refer to the following common solutions:

• No Display/Black Screen:
  • Check all cable connections, especially the LVDS cable, to ensure they are securely plugged in.
  • Verify that the DIP switches are set correctly according to your car model and screen size (refer to Section 4.1).
  • Ensure the car's power is fully restored after installation.
• No Audio or Poor Sound Quality:
  • Confirm that the "Use the original Bluetooth audio" option is enabled in the module's audio settings (refer to Section 5.3).
  • Ensure your phone is correctly connected to "MB Bluetooth" and selected as the audio source.
  • Check the volume levels on both your phone and the car's system.
• Wireless Connection Issues (CarPlay/Android Auto):
  • Ensure both Bluetooth and Wi-Fi are enabled on your smartphone.
  • Forget the device from your phone's Bluetooth settings and attempt to reconnect.
  • Restart both your phone and the car's infotainment system.
  • Ensure the module's Wi-Fi antenna is properly connected.
• Controls Not Responding:
  • Verify that the module is correctly installed and all harnesses are secure.
  • If using steering wheel controls, ensure your car model is compatible and refer to Section 5.4 for specific button functions.
  • Try resetting the system by long-pressing the right dial on the central knob for 15 seconds, or the designated steering wheel button.
• System Freezes/Crashes:
  • Perform a system reset (refer to control instructions in Section 5.4).
  • Ensure your phone's operating system and apps are up to date.

For persistent issues, please refer to the full user manual PDF or contact customer support.

9. User Tips

• Pre-Installation Check: Always confirm your car's NTG system version and screen size before purchasing and installing to ensure compatibility.
• Professional Installation: While the module is plug-and-play, professional installation is highly recommended to avoid damage to your vehicle or the module.
• Firmware Updates: Check the manufacturer's website periodically for any available firmware updates to ensure optimal performance and compatibility with the latest smartphone OS versions.
• Cable Management: Properly route and secure all cables during installation to prevent interference, wear, and tear, and to maintain a clean interior.
• Voice Commands: Familiarize yourself with voice commands for Siri or Google Assistant to maximize hands-free operation and safety while driving.

10. Warranty and Support

The ANYFAR Wireless Carplay Android Auto Module comes with a commitment to quality and customer satisfaction.

• Quality Assurance: The product undergoes rigorous quality checks.
• Fast Delivery Guarantee: In case of delayed delivery, a coupon code may be provided. Refunds are available if the package is lost or items are damaged during transit, or if delivery is not made within 30 days.
• Security & Privacy: Your personal details are protected and not shared with third parties without consent.

For detailed warranty information, technical support, or to report any issues, please contact the seller or refer to the official product page.

A comprehensive user manual in PDF format is available for download: View User Manual (PDF)