E-Bike LCD Display F3

Contents

F3 E-Bike 24V/36V/48V/60V UART NFC LCD Display User Manual

Comprehensive guide for installation, operation, and maintenance.

1. Product Overview

The F3 E-Bike LCD Display is a versatile color meter and speedometer designed for electric bicycles and scooters. It features NFC functionality for enhanced security and provides essential riding data such as speed, battery level, odometer, trip distance, voltage, and current. This display is compatible with 24V, 36V, 48V, and 60V systems and connects via a 5-pin UART interface.

F3 E-Bike LCD Display with NFC card and control unit
Figure 1: F3 E-Bike LCD Display with NFC card and control unit.
F3-NFC function Bicycle LCD instrument
Figure 2: F3-NFC function Bicycle LCD instrument highlighting NFC capability.

2. Specifications

Feature Detail
Product Model F3 Color Animation Gauge with F3NFC function
Product Size 84.1mm x 58.1mm x 11.0mm
Compatible Voltage 24V / 36V / 48V / 60V
Communication Method UART
USB Charging Function 5V / 500mA (Type-C)
Product Shell Material ABS and Metal Parts
Applicable Handlebar Size 22.2 MM / 25.4 MM / 28.6 MM / 31.8 MM
Color Black
Origin Mainland China
High-concerned chemical None

Product Features:

  • Battery level indicator
  • Headlight control
  • Boost function
  • Assist gear display
  • Speed display (current, average, max)
  • Small mileage (trip distance)
  • Total mileage (odometer)
  • Operating time
  • Metric and imperial unit conversion
  • Fault prompt
  • NFC chip anti-replication for vehicle security
Detailed specifications and features of the F3 E-Bike LCD Display
Figure 3: Detailed specifications and features.
Product dimensions and handlebar compatibility for the F3 E-Bike LCD Display
Figure 4: Product dimensions and handlebar compatibility.

3. Installation Guide

3.1 Mounting the Display

  1. Choose a suitable position on your e-bike or scooter handlebar. The display is compatible with handlebar sizes: 22.2 MM, 25.4 MM, 28.6 MM, and 31.8 MM.
  2. Securely attach the display bracket to the handlebar using the provided screws. Ensure the display is positioned for optimal visibility and access to the control unit.
  3. Slide the F3 LCD Display onto the mounted bracket until it clicks into place.
F3 E-Bike LCD Display mounted on a handlebar
Figure 5: Display mounted on a handlebar.
Rear view of the F3 E-Bike LCD Display showing cable routing
Figure 6: Rear view showing cable routing.

3.2 Wiring Connections

The F3 LCD Display uses a 5-pin waterproof round port for connection to your e-bike's controller. Ensure your controller has a compatible 5-pin UART interface.

Wiring diagram for the 5PIN male waterproof cable of the F3 E-Bike LCD Display
Figure 7: 5PIN Male Waterproof Cable Wiring Diagram.
  • Red (D+): Power Positive
  • Black (GND): Ground
  • Yellow (TX): Transmit Data
  • Green (RX): Receive Data
  • Blue (K): Control Line (e.g., headlight control)

Important: Always ensure the e-bike's power is OFF before making any electrical connections. Incorrect wiring can damage the display or controller.

4. Operating Instructions

4.1 Power On/Off

Press and hold the power button on the control unit to turn the display ON or OFF.

Features breakdown: Process, NFC function, Type-C charging, showing the control unit
Figure 8: Control unit with power button and Type-C charging port.

4.2 Display Functions

Once powered on, the display will show various riding parameters:

  • Speed: Current riding speed (KM/H or MPH).
  • Battery Level: Graphical indicator of remaining battery charge.
  • PAS (Pedal Assist System) Level: Current assist level.
  • ODO (Odometer): Total accumulated distance.
  • TRIP: Distance covered during the current ride.
  • VOL: Current battery voltage.
  • CUR: Current motor current.
  • Operating Time: Duration of the current ride.
  • Headlight Indicator: Shows if headlights are on.
  • NFC Indicator: Shows NFC status.
Close-up of the F3 E-Bike LCD Display showing speed, ODO, TRIP, VOL, CUR
Figure 9: Display showing various parameters.

4.3 NFC Function

The F3 display incorporates an NFC chip for anti-replication and enhanced vehicle security. Use the provided NFC card to interact with this feature. Specific instructions for activating and using the NFC security features will depend on your e-bike's controller and system integration.

4.4 Adjusting Settings

The control unit typically includes buttons for adjusting PAS levels, turning headlights on/off, and accessing other settings. Refer to your e-bike's main controller manual for detailed instructions on how to navigate and change settings through the display, including metric/imperial conversion and boost function activation.

5. Maintenance

5.1 General Care

  • Keep the display clean using a soft, damp cloth. Avoid abrasive cleaners or solvents.
  • Protect the display from direct sunlight for prolonged periods and extreme temperatures.
  • Ensure all connections are secure and free from moisture.

5.2 Charging the Control Unit

The control unit supports Type-C charging (5V/500mA). Connect a compatible USB Type-C cable to the charging port on the control unit to recharge its internal battery, if applicable.

6. Troubleshooting

  • Display Not Turning On: Check all cable connections, especially the 5-pin UART cable. Ensure your e-bike's battery is charged and powered on.
  • Incorrect Readings: If speed or distance readings are inaccurate, verify the wheel circumference setting in your e-bike's controller (if adjustable via display). Ensure the speed sensor is correctly installed and functioning.
  • Fault Prompts: The display is equipped with a fault prompt function. If an error code appears, consult your e-bike's main controller manual for the meaning of the code and corresponding troubleshooting steps.
  • Display Color/Brightness Issues: Light reflection and different displays may cause the perceived color of the item to vary slightly from the actual product. This is generally not a functional issue.

7. Warranty and Support

7.1 Return Policy

If the item is damaged upon receipt, contact the seller within 24 hours. If the item is in your possession for more than 7 days, it is considered used, and a refund or replacement may not be issued. For dissatisfaction due to incorrect, damaged, defective, or misdescribed items, returns are accepted within 7 days for replacement or refund. Return shipping costs for personal reasons (e.g., dislike) are the buyer's responsibility. All returns must be in original packaging and include tracking information, reason for return, and order ID.

For technical support or warranty claims, please contact your seller directly with your purchase details.

8. User Tips

  • Compatibility Check: Before purchase or installation, always verify that your e-bike's controller uses a 5-pin UART communication protocol and is compatible with the F3 display.
  • Speed Limits: The maximum speed displayed is determined by your e-bike's motor and controller settings, not the display itself. Adjustments to speed limits are typically made via the e-bike's controller programming.
  • NFC Security: Utilize the NFC function to enhance the security of your e-bike. Familiarize yourself with how it integrates with your specific e-bike system.

9. Frequently Asked Questions (FAQ)

Q: Is the F3 E-Bike LCD Display compatible with a Bafang BBS02 middle motor conversion kit?
A: The F3 display uses a standard 5-pin UART communication protocol. While many Bafang controllers use UART, specific compatibility with the BBS02 kit should be verified with your Bafang controller's documentation or the kit supplier to ensure pin configuration and communication protocols match.
Q: What is the maximum speed I can drive with this display?
A: The F3 LCD Display shows the current speed, but it does not determine the maximum speed of your e-bike. The maximum speed is governed by your e-bike's motor, controller, and local regulations. The display will accurately reflect whatever speed your e-bike is achieving.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.