JIKONG JK-BD6A24S10P (8S-24S Series)

Contents

JIKONG Smart Active Balance BMS User Manual

Model: JK-BD6A24S10P (8S-24S Series)

Brand: JIKONG

1. Product Overview

The JIKONG Smart Active Balance BMS (Battery Management System) is an intelligent protection board designed for large capacity series lithium battery packs. It offers comprehensive management features including voltage acquisition, high current active balancing, overcharge, over-discharge, overcurrent, over-temperature protection, coulomb metering, Bluetooth communication, and optional GPS remote functionality. This BMS is compatible with Li-ion, LiFePo4, and LTO battery types.

The system utilizes energy transfer active balancing technology, providing a continuous balance current of 1A/2A to ensure battery consistency, extend battery life, and delay aging. A dedicated mobile application (APP) for Android, iOS, and HarmonyOS allows users to monitor battery status, modify parameters, and control charge/discharge switches via Bluetooth. Its compact size and full functionality make it suitable for various applications such as small sightseeing vehicles, mobility scooters, shared cars, high-power energy storage, base station backup power supplies, and solar power stations.

JIKONG BMS overview with supported battery types and app compatibility
JIKONG intelligent active balanced power management system (BMS) supports 8S-24S series batteries and is compatible with Li-ion, LiFePo4, and LTO battery types. The system supports iOS, Android, and HarmonyOS applications.
Diagram showing various applications for the JIKONG BMS
The JIKONG BMS is suitable for a wide range of applications, including electric motorcycles, tricycles, sightseeing buses, loading cars, RV energy storage, speedboats, drones, electric bikes, power tools, power storage, lithium-ion batteries, and outdoor power.

2. Specifications

2.1. General Features

  • Balance Function: Active Balanced BMS
  • Hardware or Smart: SMART BMS
  • Charge and Discharge Port: Common Port BMS
  • Type: LiFePo4 Battery BMS / Li-ion / LTO
  • Battery Series: 4S-24S
  • Adapting System: Android or iOS Harmony
  • Supported Interfaces: RS485/CAN/Heat/APP/BT
  • Other Features: Temperature protection/Heating Function/Support Parallel Connection
  • Certification: CE, FCC, RoHS, UL

2.2. Technical Parameters (Example for 150A/200A versions)

JIKONG BMS Technical Parameters
ParameterValue (150A)Value (200A)Unit
Supply Voltage20-10020-100V
Operating Power Consumption<800<800mW
Operating Temperature-30-70-30-70°C
Max Collection Strings2424S
Max Balancing Current1A / 2A2AA
Max Charging Current150200A
Max Discharge Current150200A
Max Instantaneous Current300400A
Max Internal Loop Resistance0.3650.275mΩ
Protective Plate Size (L×W×H)162×102×20.4162×102×20.4mm
Finished Weight560560g
Dimensions of JIKONG BMS
Product dimensions for the JIKONG BMS. Note: Data tolerance range is ±2mm.
Product Parameters table for JIKONG Inverter BMS FWVer 1.9.0
Detailed product parameters for various JIKONG Inverter BMS models (JK-B1A8S10P, JK-B1A8S20P, JK-B2A8S20P, JK-B2A8S30P) including battery strings, balance current, continuous discharge current, and protection functions.
Product Parameters table for JIKONG Inverter BMS FWVer 1.9.0
Detailed product parameters for various JIKONG Inverter BMS models (JK-BD6A20S10P to JK-BD6A24S30P) including battery strings, balance current, continuous discharge current, and protection functions.

3. Setup and Installation

3.1. Packing List

Before installation, please verify that all components are present:

JIKONG BMS packing list
The packing list includes: 1. BMS x1, 2. Switch x1 (long 50cm), 3. NTC x1 (long 40cm), 4. Sampling line B x1 (long 70cm), 5. Sampling line A x1 (long 70cm).

3.2. Wiring Instructions

The wiring method varies depending on the number of battery cells in your pack. Ensure all cables are correctly connected before powering on. Always disconnect the charger and load, then unplug the battery sampling cable in order from high to low when disassembling.

Wiring diagram for 24-string cells
Wiring diagram for a 24-string cell configuration. Connect P- to the total negative electrode, B- to the battery negative, and P+ to the battery positive. Balance wires connect to each cell from 1S to 24S.
Wiring diagram for 16-string cells
Wiring diagram for a 16-string cell configuration. Connect P- to the total negative electrode, B- to the battery negative, and P+ to the battery positive. Balance wires connect to each cell from 1S to 16S.
Wiring diagram for 4-string cells
Wiring diagram for a 4-string cell configuration. Connect P- to the total negative electrode, B- to the battery negative, and P+ to the battery positive. Balance wires connect to each cell from 1S to 4S.

3.3. Interface Definitions

The BMS features various interfaces for communication and control:

JIKONG BMS rich interface diagram
The BMS offers a rich set of interfaces including CAN, RS485, Bluetooth (BT), NTC, Soft Switch, SOC Indicator, Key Switch, and Active Equalizer. Specific ports are labeled for RS485/CAN, NTC, GPS, Sampling port B, Display/Switch, Hot, and Sampling port A.
JIKONG BMS communication modes and interfaces
Four communication modes/mainstream interfaces are supported: CAN, RS485, UART, RS232. Additional modules include Parallel Module, Interface board, Active Equalizer, and NTC.

3.4. APP Installation and Device Activation

To install the mobile APP, scan the QR code below. Android Version 7 or higher is required.

QR code for JIKONG BMS mobile APP
Scan this QR code to download the JIKONG BMS mobile APP.

Before powering on the protection board, ensure the balance cables are correctly connected, and the P- and B- terminals are properly wired. Verify that the protection board is securely fixed to the battery cells. Incorrect connections can lead to malfunctions or damage.

The protection board does not have a power-on control switch. It is designed for charging activation mode (charger voltage 2V higher than battery voltage). After battery assembly, connect the charger to activate the BMS. Key activation and display activation are also supported; simply insert the cable into the display interface and press the button to activate.

4. Operating Instructions

4.1. Active Equalization

The BMS uses active equalization to transfer energy from high-voltage cells to low-voltage cells, ensuring cell consistency. Before using this function, set basic battery parameters in the APP, including cell count, battery capacity, trigger equalization differential pressure (default can be retained), voltage, and current calibration.

You can set the balance trigger pressure difference (mV) in the APP. When enabled, balancing automatically starts if the voltage difference between any two battery strings exceeds the set value, and stops when it falls below the set value. The default balance current is 1A/2A. It is recommended that the balance current does not exceed 0.2C of the battery capacity. If balancing is not needed, it can be turned off in the APP's BMS control page.

4.2. Heating Function (Optional)

The optional heating function uses a resistance heater or heating film to warm the battery at low temperatures, preventing performance degradation due to reduced battery activity. The designed heating current is 10A. Users can control this function via the APP based on actual temperature. It is recommended to install a temperature control switch (45°C to 65°C normally closed type) in series with the heating circuit as a secondary safety measure.

4.3. Alarm Function (Optional)

The optional alarm function provides external alerts when the BMS detects safety risks such as over-temperature, overcharge, or over-discharge.

4.4. Battery Parallel Function (Optional)

This optional function supports parallel connection of battery packs for energy storage applications. It requires synchronous use with parallel modules and disabling the "disable charging current limiting" function in the APP.

4.5. ACC Detection Function (Optional)

The optional ACC detection function enables discharge. This can be achieved by applying a voltage between ACC+ and ACC- (20V-100V) or by directly short-circuiting ACC+ and ACC-. A separate charger detection interface (C_detect+ and C_detect-) is also provided for enabling charging, connecting to the positive and negative terminals of the charger's 12V voltage signal output.

4.6. Communication Functions

The BMS supports optional CAN and RS485 communication. Users can select CAN or RS485 for multiplexed ports in the APP. The address and communication protocol can be configured according to specific requirements. Refer to the JIKONG Protection Board communication protocol document for details.

4.7. APP and PC Software Usage

The dedicated APP and PC software provide real-time data monitoring and dynamic parameter configuration. Users can view various information such as voltage, current, temperature, and number of strings.

JIKONG BMS APP real-time monitoring interface
The JIKONG BMS APP provides real-time data monitoring, including voltage, current, temperature, SOC, and cycle count, along with alarm indicators.
JIKONG BMS APP settings interface
The APP allows for basic and advanced settings, including cell count, battery capacity, balance trip voltage, and various protection parameters like overvoltage and undervoltage points.
JIKONG BMS PC software interface
The PC intelligent interconnection allows for easy operation, real-time viewing of all data, and comprehensive settings and calibration capabilities, supporting firmware updates.

4.8. LCD Touch Screen (Optional)

An optional 3.2-inch or 4.3-inch LCD touch screen can be connected for direct monitoring and control. It supports parallel monitoring, touch settings, real-time status display, and upgraded functions for enhanced intelligence and automation.

JIKONG 3.2 inch Display
JIKONG 3.2 inch Display with a 400mm cable. Long press to turn on or turn off the BMS.
JIKONG 4.3 inch Touch Screen
JIKONG 4.3 inch Touch Screen with various cables: Cable A (3000mm), Cable B (300mm), Cable C (280mm), and a Switch Cable (120mm). Long press the switch to turn on or turn off the BMS.

5. Maintenance and Protection Features

The JIKONG BMS includes several standard protection features to ensure the safety and longevity of your battery pack:

  • Overcharge Protection and Recovery: The BMS will shut off charging if any cell exceeds the set overcharge voltage. Charging resumes when all cells fall below the recovery voltage.
  • Discharge Undervoltage Protection and Recovery: If any cell's voltage drops below the set undervoltage protection level during discharge, the BMS will stop discharging. Discharge resumes when all cells are above the recovery voltage. The BMS will automatically shut down if any cell's voltage drops below the automatic shutdown voltage.
  • Charge Overcurrent Protection and Recovery: If the charging current exceeds the set continuous charging current for a specified delay, the BMS will stop charging. Charging resumes after the overcurrent release time.
  • Discharge Overcurrent Protection and Recovery: If the discharging current exceeds the set continuous discharging current for a specified delay, the BMS will stop discharging. Discharge resumes after the overcurrent release time.
  • Overtemperature Protection and Recovery: The BMS will stop charging/discharging if the temperature exceeds the set overtemperature protection value. Operation resumes when the temperature falls below the recovery value.
  • Low Temperature Protection and Recovery: The BMS will stop charging if the temperature falls below the set low temperature protection value. Charging resumes when the temperature rises above the recovery value. For extremely cold environments, consider using the optional heating function.
  • Short Circuit Protection and Recovery: The BMS provides short circuit protection. Users can adjust the short circuit protection delay and recovery time via the APP if needed, especially during initial connection of chargers or loads with high peak currents.
  • Emergency Switch: In case of critical issues like over-temperature, over-discharge, overcharge, or cell string drops, activating the emergency switch in the APP will enable charge and discharge for 30 minutes, allowing for emergency use.
  • Intelligent Sleep: The BMS features an intelligent sleep function to reduce its own power consumption when in standby (charging/discharging current less than 1A for 26 consecutive hours). It can be reactivated by pressing a button or connecting a charger.

6. Troubleshooting

Most issues related to the JIKONG BMS are handled by its integrated protection features. If the BMS enters a protection state, check the following:

  • No Power/Activation Issue: Ensure all wiring is correct and secure. If the BMS does not activate, try connecting a charger to initiate the charging activation mode. If using an optional button or display, ensure it is correctly connected and pressed.
  • Frequent Protection Triggers: Review the parameter settings in the APP. Adjust protection thresholds (e.g., overcurrent delay, voltage limits) if they are too sensitive for your specific battery pack or load.
  • Balancing Issues: Verify that the battery type and capacity are correctly set in the APP. Check the balance trigger pressure difference. Ensure all balance wires are properly connected.
  • Temperature-Related Issues: If the BMS frequently triggers over-temperature or low-temperature protection, ensure adequate ventilation for cooling or consider using the optional heating function in cold environments.
  • Communication Problems: Check Bluetooth connection. If using RS485/CAN, ensure the correct protocol and address are configured in the APP.

For detailed diagnostics and advanced troubleshooting, refer to the full user manual PDF and the JIKONG Protection Board communication protocol document.

7. User Tips

  • Verify Model and Connectors: Before purchasing or installing, double-check the specific model version (e.g., V19) and ensure the CAN/RS485 connector type (e.g., 4-pin) matches your requirements to avoid compatibility issues.
  • Initial Setup: Take extra care during the initial wiring of balance cables and main power connections. Incorrect wiring can lead to serious damage.
  • APP Customization: Utilize the mobile APP to fine-tune protection parameters according to your battery's specifications and usage patterns for optimal performance and safety.

8. Warranty and Support

For detailed warranty information, return policies, and technical support, please refer to the complete user manual available as a PDF document. This document contains comprehensive information regarding product guarantees and service procedures.

Download the full User Manual (PDF): JIKONG Lithium Battery Active Balance Protection Board Maintenance Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.