Introduction
This manual provides detailed instructions for setting up, operating, and troubleshooting your CLIBABIQBOX TX20 Pro+ Smart TV Box. This device is designed to deliver a high-definition multimedia experience with support for 4K and 8K video, dual-band Wi-Fi, and a powerful Android operating system.
Safety Information
- Warning: Do not use the device in wet conditions.
- Maintenance and Cleaning: When performing maintenance or cleaning, ensure no water enters the interior of the device to prevent short circuits and electric shock hazards.
Package Contents
Please check the box for the following items:
- 1 x TX20 Pro+ TV Box
- 1 x Remote Control
- 1 x HDMI Data Cable
- 1 x Power Adapter
- 1 x Operating Manual
Specifications
| Feature | Specification |
|---|---|
| Model | TX20 Pro+ |
| Operating System | Android 15 |
| Processor Chip | Allwinner H313 Quad Core |
| GPU | Mali-G31 MP2 |
| Memory (RAM) | 1G DDR3, 2G DDR3, 4G DDR3, 8G DDR3 (Configurable) |
| Internal Storage | 8GB eMMC, 16GB eMMC, 64GB eMMC, 128GB eMMC (Configurable) |
| Max. Extended Capacity | TF Card Up To 64GB |
| Wi-Fi Transmission Standard | 802.11n 2.4GHz/5 GHz (Dual-band WiFi) |
| Bluetooth | Yes (BT5.0) |
| Video Output | HDMI-Compatible 2.0 |
| Max Output Resolution | 8K @ 60 Hz |
| HDR Standards | HDR10+, HDR10 |
| Audio Support | Dolby Digital, Dolby Atmos |
| Video Codecs | H.264/AVC, H.265/HEVC |
| USB Ports | 2x USB 2.0 |
| Ethernet | 100M |
| Power Source | DC 5V, 2A |
| Remote Controller | Included (Voice assistant built-in) |
| Supported Internet Services | YouTube, NETFLIX |
| IPTV Support | Yes |
| OTA Update | Yes |
| Voltage Range | Low voltage non-USB (below 75V DC, below 50V AC) |
| Certification | CE |
Setup Guide
1. Initial Connection
- Connect the HDMI cable to the HDMI port on your TV Box and the other end to an available HDMI input on your television.
- Connect the power adapter to the DC 5V port on the TV Box and then plug it into a power outlet.
- Turn on your television and select the correct HDMI input source.
- The TV Box should power on automatically, or you may need to press the power button on the remote control.
2. Network Connection
2.1. Wi-Fi Connection
- Navigate to the "Settings" menu on your TV Box.
- Select "Network" or "Wi-Fi".
- Turn on Wi-Fi. The system will automatically scan for available wireless access points.
- Select your desired Wi-Fi network from the list and enter the password.
- Once connected, an IP address will be displayed, and the status will show "Connected".
Note: Wi-Fi and Ethernet connections are mutually exclusive. If an Ethernet cable is connected, the Wi-Fi connection will be automatically disabled.
2.2. Ethernet Connection
- Connect an Ethernet cable from your router to the Ethernet port on the TV Box.
- Navigate to the "Settings" menu on your TV Box.
- Select "Network" or "Ethernet".
- Click "Ethernet". The box will automatically initiate the DHCP process and establish a wired connection.
- The network connection is available when an IP address appears.
Operating Instructions
1. Navigating the Interface
- Use the included remote control to navigate through the Android TV interface. The directional pad (up, down, left, right) and "OK" button are used for selection.
- The "Home" button will return you to the main screen.
- The "Back" button will take you to the previous screen.
2. Voice Control
The remote control includes a built-in voice assistant. Press the dedicated voice button on the remote and speak your commands to search for content, open apps, or control playback.
3. Media Playback
- The TX20 Pro+ supports 4K and 8K UHD video playback, as well as 3D video.
- You can access supported internet services like YouTube and Netflix directly from the home screen or by downloading apps from the Google Play Store.
- Connect USB storage devices (e.g., USB flash drives) to the USB 2.0 ports to play local media files.
- Insert a TF card into the designated slot for additional storage or media playback.
Firmware Upgrade Steps
To upgrade your TV Box firmware, follow these steps:
- Copy the OTA-zip update file to a TF card or a USB storage device.
- Insert a thin stick (like a toothpick) into the small hole at the bottom of the device. This hole contains a reset button. Press and hold this button.
- While still pressing the reset button, plug in the power adapter to power on the device.
- Continue holding the reset button until you see the Android recovery menu or the Android logo restart.
- Using the remote control, navigate and select "Update from EXT app".
- Then select "Update from TF card" (if using a TF card) or "Udisk" (if using a USB storage device).
- Select the "xxx.zip" (upgrade package file) and press "OK".
- The screen will display "--install/SD card...", indicating that the box is upgrading.
- Once the upgrade is complete, you will see "Installation from SD card complete" at the bottom.
- Use the remote to select "Reboot system now" and press "OK", or unplug and replug the power adapter to restart the device.
- The upgrade is complete. The "Welcome" screen will appear.
Tip: You can verify the build number in the device settings to confirm a successful update.


Maintenance and Cleaning
- Keep the device in a dry environment. Avoid exposure to moisture or liquids.
- Clean the exterior of the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ensure proper ventilation around the device to prevent overheating.
- Regularly check for and install OTA updates to ensure optimal performance and security.
Troubleshooting
1. Power Issues
- No Power:
- Check that the power adapter is correctly connected to the power source and the TV Box.
- Press the power button on the remote to turn it on.
- Verify that the status indicator light on the box is blue when powered on.
2. Display Issues
- No Picture:
- Reconnect the HDMI cable or AV cable.
- Check that the TV is on and set to the correct input source.
- If in HD mode, check the HD connection, try a different HDMI cable, or set the TV box's output resolution to 720p.
- Blank TV screen, player LED flashing:
- Turn off the TV box, wait 30 seconds, and then turn it back on.
3. Audio Issues
- No Sound or Distorted Sound:
- Adjust the volume on both the TV Box and your television.
- Check that speakers are correctly connected.
- No Audio or Digital Output:
- Check digital audio connections.
- Ensure your amplifier (if used) is set up correctly.
- No Sound During Movie Playback:
- The set-top box may not support the audio codec. You can change the supported audio in the playback menu.
- Check the volume.
- No sound during HD connection:
- Check the connection between the TV and the box's HDMI port.
- Check your TV system settings.
- Check the volume.
4. Remote Control Issues
- Box Doesn't Respond to Remote Control:
- Point the remote control directly at the sensor on the front of the TV Box.
- Shorten the distance between the remote control and the TV Box.
- Replace the batteries in the remote control.
5. Media Playback & System Issues
- Player Doesn't Respond to Some Commands During Playback:
- Operation may not be allowed. Refer to the user manual for specific app or media limitations.
- If the system has stopped, reinsert the power adapter to restart the TV Box.
- Unable to read USB flash drive contents:
- The USB flash drive format may be incompatible with the box.
- If a USB drive cannot be read, turn off the TV box for 30 seconds and then restart it.
- USB flash drive runs slowly:
- Large files or high-resolution USB drives may take longer to read and display on the TV screen.
User Tips
- Kodi Compatibility: The TX20 Pro+ is an Android-based device, and it is generally possible to install Kodi. You can download the APK from the official Kodi website or through the Google Play Store (if available for your region/device).
- Streaming Service Compatibility: While YouTube and Netflix are explicitly supported, compatibility with other services like NowTV may vary. Check the Google Play Store on your device for availability or consult the service provider's requirements.
- Performance Optimization: For the best experience, especially with high-resolution content or demanding apps, ensure your internet connection is stable and fast. Utilize the 5GHz Wi-Fi band if your router supports it.
Warranty and Support
This product comes with a 12-month guarantee from the date of purchase. For detailed warranty terms, technical support, or further assistance, please refer to the comprehensive user manual available in PDF format.
A detailed user manual and other documents are available for download. You can access the PDF version of the user manual for more in-depth information and diagrams.
For additional support, please contact the seller or refer to the official product support channels.