TWS E6S Bluetooth Earphones User Manual

1. Introduction

Thank you for choosing the TWS E6S Bluetooth Earphones. These wireless earbuds are designed to provide a high-quality audio experience with convenient features for everyday use, including Bluetooth 5.0 connectivity, touch control, noise reduction, and a built-in microphone. This manual will guide you through the setup, operation, and maintenance of your new earphones.

2. Safety Information

• Do not expose the earphones or charging case to extreme temperatures, direct sunlight, or high humidity.
• Avoid dropping or subjecting the device to strong impacts.
• Keep out of reach of children and pets.
• Do not attempt to disassemble or repair the device yourself. This may void the warranty and cause damage.
• Use only the provided charging cable or a certified equivalent.
• Prolonged listening at high volumes may cause hearing damage. Adjust volume to a safe level.

3. Package Contents

• TWS E6S Bluetooth Earphones (Left and Right)
• Charging Case with LED Display
• Charging Cable
• User Manual (this document)

4. Product Overview

Familiarize yourself with the components of your TWS E6S earphones:

Figure 4.1: TWS E6S Earbuds and Charging Case with key features.

Figure 4.2: Close-up of the charging case LED display.

The charging case features an LED digital display that shows the battery percentage of the case and charging status of the individual earbuds. The earbuds themselves are equipped with touch-sensitive areas for control and an integrated microphone.

5. Setup

5.1 Initial Charging

Before first use, fully charge the earphones and the charging case.

1. Place both earbuds into the charging case.
2. Connect the charging cable to the charging port on the case and a USB power source.
3. The LED display on the charging case will show the current battery level and charging status. Ensure it reaches 100% for optimal performance.
4. Once fully charged, disconnect the charging cable.

5.2 Pairing with a Device

The TWS E6S earphones feature automatic boot-up and matching for convenient pairing.

Figure 5.1: Automatic Connection and Boot-up Matching.

1. Open the charging case. The earbuds will automatically power on and enter pairing mode.
2. On your mobile device (smartphone, tablet, etc.), enable Bluetooth.
3. Search for available Bluetooth devices and select "E6S" from the list.
4. Once connected, you will hear a confirmation tone, and the earbuds will be ready for use.
5. The earphones will automatically reconnect to the last paired device when taken out of the case, if Bluetooth is enabled on the device.

6. Operating Instructions

6.1 Touch Controls

The E6S earphones utilize intelligent touch control for various functions:

Figure 6.1: Touch control area on the earbud.

• Play/Pause: Single tap on either earbud.
• Next Track: Double tap on the right earbud.
• Previous Track: Double tap on the left earbud.
• Answer/End Call: Single tap on either earbud during an incoming call or active call.
• Reject Call: Press and hold either earbud for 2 seconds during an incoming call.
• Activate Voice Assistant (Siri): Triple tap on either earbud.

Figure 6.2: Activating Voice Assistant.

6.2 Calling Functions

The earphones support dual-channel calls with intelligent noise reduction for clearer conversations.

Figure 6.3: Dual Channel Call with Noise Reduction.

6.3 Gaming Mode

Experience ultra-low latency for gaming with the E6S earphones, ensuring synchronized audio and visuals.

Figure 6.4: Ultra-low latency for gaming.

7. Maintenance

7.1 Cleaning

• Wipe the earbuds and charging case with a soft, dry, lint-free cloth.
• Do not use harsh chemicals, cleaning solvents, or strong detergents.
• Avoid getting moisture into any openings.

7.2 Waterproofing

The E6S earphones are rated IPX5 waterproof, offering protection against sweat and light splashes. They are suitable for workouts and light rain but should not be submerged in water.

Figure 7.1: IPX5 Waterproofing for daily use.

7.3 Storage

When not in use, store the earphones in their charging case to protect them and keep them charged. Store in a cool, dry place away from extreme temperatures.

8. Troubleshooting

• Earbuds not pairing with each other: Place both earbuds back into the charging case, close the lid, then open it again. They should automatically pair with each other.
• Earbuds not connecting to device: Ensure Bluetooth is enabled on your device. Forget the "E6S" device in your Bluetooth settings and try pairing again. Make sure the earbuds are charged.
• No sound from one earbud: Try resetting the earbuds by placing them in the case and then taking them out. If the issue persists, try re-pairing.
• Charging case not charging: Ensure the charging cable is securely connected to both the case and the power source. Try a different cable or power adapter.
• Touch controls unresponsive: Ensure your fingers are clean and dry. A single tap should be quick and precise.

9. Specifications

Figure 9.1: Power and Battery Specifications.

10. User Tips

• For the best sound quality and noise isolation, ensure you select the correct ear tip size for a snug fit.
• Regularly clean the charging contacts on both the earbuds and the case to ensure reliable charging.
• If experiencing connection issues, try restarting your mobile device's Bluetooth or the device itself.
• Keep the charging case charged, even when not using the earbuds, to ensure they are always ready.

11. Warranty and Support

This product comes with a standard manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and conditions. For technical support or further assistance, please contact the retailer or manufacturer directly.