Junsun RCA Adapter Cable

Contents

Junsun Car Stereo Radio RCA Output Wire Aux-in Adapter Cable User Manual

1. Introduction

Thank you for choosing the Junsun Car Stereo Radio RCA Output Wire Aux-in Adapter Cable. This cable is designed to expand the audio and video input/output capabilities of your compatible Junsun car radio system, allowing for connections to external microphones, subwoofers, auxiliary audio sources, and video devices.

Important Compatibility Note: This cable is exclusively designed for use with Junsun Car Radios that feature a compatible multi-pin connector and frame. It may not be compatible with other brands or models.

Junsun Car DVD RCA Line with various audio and video connectors

Figure 1: Junsun Car Stereo RCA Adapter Cable Overview

2. Package Contents

Please check the package for the following item:

  • 1 x Junsun Car Stereo Radio RCA Output Wire Aux-in Adapter Cable
Angled view of the Junsun RCA cable showing multiple connectors

Figure 2: Contents - Junsun RCA Adapter Cable

3. Setup and Connection

Before installation, ensure your Junsun car radio is powered off and disconnected from the vehicle's power supply to prevent damage.

3.1 Connector Identification

Refer to the diagram below to identify each connector on the RCA adapter cable:

Detailed wiring diagram of the Junsun RCA cable with numbered labels for each connector

Figure 3: Junsun RCA Cable Wiring Diagram

  1. MIC: Microphone input (3.5mm jack)
  2. CVBS-IN-1: Composite Video Broadcast Signal Input 1 (Yellow RCA)
  3. VIDEO OUT: Video Output (Yellow RCA)
  4. VIDEO IN: Video Input (Yellow RCA)
  5. SUB WOOFER: Subwoofer Output (Green RCA)
  6. AMP CONT: Amplifier Control (Blue wire)
  7. AUX R IN: Auxiliary Right Audio Input (Red RCA)
  8. AUX L IN: Auxiliary Left Audio Input (White RCA)
  9. AUDIO OUT R: Right Audio Output (Red RCA)
  10. AUDIO OUT L: Left Audio Output (White RCA)

3.2 Installation Steps

  1. Locate the Main Port: Identify the corresponding multi-pin port on the back of your Junsun car radio. This port is typically designed for accessory expansion.
  2. Connect the Main Harness: Carefully align the white multi-pin connector of the RCA adapter cable with the port on your car radio and push it in until it clicks securely into place. Ensure it is fully seated.
  3. Connect External Devices: Attach your desired external audio/video devices to the corresponding RCA or 3.5mm jacks on the adapter cable. For example:
    • Connect an external microphone to the MIC jack (1).
    • Connect a rearview camera or other video source to CVBS-IN-1 (2) or VIDEO IN (4).
    • Connect an external display to VIDEO OUT (3).
    • Connect an amplifier to AMP CONT (6) and a subwoofer to SUB WOOFER (5).
    • Connect external audio sources (e.g., MP3 player) to AUX R IN (7) and AUX L IN (8).
    • Connect to external amplifiers or sound processors using AUDIO OUT R (9) and AUDIO OUT L (10).
  4. Secure Wiring: Route all cables neatly and securely to prevent interference or damage.
  5. Reconnect Power: Once all connections are made, reconnect your car radio to the vehicle's power supply and power it on.
Close-up view of the main multi-pin connector of the Junsun RCA cable

Figure 4: Main Harness Connector

4. Operating Instructions

Once the RCA adapter cable and external devices are connected, operate them through your Junsun car radio's interface:

  • Input Selection: Use your car radio's menu or source button to select the appropriate input (e.g., AUX, AV-IN, Camera) for the connected devices.
  • Output Control: Audio and video outputs will typically be active when the corresponding source is selected or when the car radio is in a mode that utilizes these outputs (e.g., playing music through RCA outputs, displaying video on an external screen).
  • Microphone Usage: If an external microphone is connected, ensure it is selected as the input source for calls or voice commands in your car radio's settings.

Refer to your Junsun car radio's user manual for specific instructions on navigating its interface and selecting input/output sources.

5. Maintenance

  • Cleaning: Keep the connectors clean and free from dust and debris. Use a dry, soft cloth to wipe the cable if necessary. Do not use liquid cleaners directly on the connectors.
  • Handling: Avoid sharp bends or excessive pulling on the cable, especially near the connectors, to prevent internal wire damage.
  • Storage: If the cable is removed, store it in a dry, cool place away from direct sunlight and extreme temperatures.

6. Troubleshooting

ProblemPossible CauseSolution
No audio/video output from connected deviceIncorrect input selected on car radio; Loose connection; Faulty external device/cableEnsure correct input is selected. Check all connections are secure. Test external device/cable with another setup if possible.
Poor audio/video qualityLoose connection; Interference; Damaged cableCheck all connections. Ensure cables are routed away from power lines. Inspect cable for visible damage.
Microphone not workingMicrophone not connected; Incorrect input selected; Microphone settings on car radioEnsure microphone is fully plugged in. Select microphone input on car radio. Check car radio's audio settings for microphone.
Cable does not fit car radioIncompatible car radio modelVerify your car radio is a Junsun model with the correct multi-pin port. This cable is specifically for compatible Junsun units.

7. Specifications

FeatureDetail
BrandJunsun
Model NameRCA Adapter Cable
Item TypeCables, Adapters & Sockets
Special FeaturesCar Stereo Radio Adapter Cable
InterfaceRCA
Voltage12 V (typical car system voltage)
Out PowerStandard
MaterialPVC
Item SizeApprox. 160mm
Item WeightApprox. 100g
OriginMainland China

8. User Tips

  • Easy Installation: Users have noted that this cable is generally easy and intuitive to install, especially when paired with compatible Junsun multimedia systems.
  • System Integration: This cable works perfectly to expand the functionality of your Junsun multimedia system, allowing for seamless integration of additional audio and video components.
  • Check Compatibility: Always double-check that your Junsun car radio has the correct multi-pin port for this adapter cable before attempting installation.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your Junsun car radio or contact Junsun customer service directly through their official channels. Keep your purchase receipt as proof of purchase.

© 2023 Junsun. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.