intelamp YL005-13P10

Contents

Intelamp Solar Street Light User Manual

Model: YL005-13P10 | Brand: intelamp

1. Introduction

Thank you for choosing the Intelamp Solar Street Light. This product is designed to provide efficient, reliable, and eco-friendly outdoor lighting for your garden, street, or yard. Featuring a powerful solar panel, a high-capacity battery, and intelligent motion sensing, this light offers superior brightness and extended illumination. Please read this manual carefully before installation and use to ensure optimal performance and safety.

2. Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture beyond its IP65 rating.
  • Handle with care to avoid cuts or injuries.

WARNING: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. For disposal, please check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with the applicable legal requirements.

3. Product Features

  • Intelligent Motion Sensing: Equipped with two motion sensors, offering a sensing range of up to 180°. Features intelligent technology for mutual control, where one light turning on activates other lights within a 30-meter radius simultaneously.
  • High Capacity Battery: Powered by a 12500mAh high-capacity lithium battery, providing 12-14 hours of ultra-bright illumination after a full charge.
  • Ultra-Bright Illumination: Delivers 3000LM super bright light with a 150° wide angle, covering a lighting range of 1000-1200 sq.ft.
  • Multiple Lighting Modes: Offers 4 modes: Strong Light, Dim Light, Motion Detection, and Constant Light. Motion-triggered high-brightness duration can be customized (30 seconds, 3 minutes, or 10 minutes) via remote control.
  • Durable and Weatherproof: Constructed from high-quality engineering-grade ABS+ alloy material with an IP65 outdoor waterproof rating, effectively resisting wind, frost, rain, and snow.
  • Optimized Design: Unique partition design and sunshade feature prevent direct sunlight exposure to the lamp body, reducing degradation of the battery, circuit, and LEDs due to high temperatures, thereby extending service life. New lamination technology increases charging efficiency by 30%.
  • Easy Installation: Comes with a complete set of installation accessories and instructions, allowing for simple installation without the need for a professional electrician.
Internal components of the solar street light, showing the unique partition design, SMD 5730 LEDs, and corrosion-resistant body.

Internal components and design features for enhanced durability and performance.

Diagram showing the three lighting modes: Strong Light Sensor, Dim Light Sensor, and Strong Long Light Mode.

Illustration of the available lighting modes.

Diagram showing high-efficiency solar panels, 3.2V/12500mAh extra long battery life, 3000LM high light efficiency lamp beads, high quality materials, unique design partitions, and new lamination technology.

Advanced features including high-efficiency solar panels and battery technology.

4. Specifications

AttributeValue
Model NumberYL005-13P10
Brand Nameintelamp
Power SourceSOLAR
Battery Capacity12500mAh (Lithium battery)
Brightness3000LM
Light SourceLED bulbs (SMD 5730)
Color Temperature6500K
Is DimmableYes
Protection LevelIP65
Body MaterialABS + Alloy
Installation MethodSelf-contained
Is Bulbs IncludedYes
Is Batteries IncludedYes
OriginMainland China
CertificationCE, FCC, GS, LVD, ROHS, UL
UseHOLIDAY (suitable for general outdoor use)
Product dimensions: 9.1in (solar panel width), 13.4in (solar panel length), 6.6ft (cable length), 6.4in (light width), 12in (light length), 10.6in (bracket length).

Product dimensions.

5. Setup and Installation

The Intelamp Solar Street Light is designed for easy, self-contained installation. No professional electrician is required.

5.1. Preparation

  1. Remove all protective films from the solar light casing and solar panel.
  2. Ensure the solar panel is unobstructed and free of stains.
  3. Choose a well-lit, unobstructed location for installation. The recommended installation height is 1.8-2.5 meters (approximately 6-8 feet) to maximize solar exposure and lighting coverage.

5.2. Installation Steps

  1. Attach the stainless steel bracket to the light fixture using the provided screws and nuts. Ensure it is firm and reliable.
  2. Hold the assembled light and bracket against your desired mounting surface (wall, pole, etc.) and mark the positions for drilling.
  3. Drill holes at the marked positions.
  4. Insert the expansion bolts into the drilled holes.
  5. Mount the light fixture with the bracket onto the wall/pole, securing it with the nuts and washers.
  6. Adjust the angle of the solar panel to face direct sunlight for optimal charging.

Product video demonstrating installation steps and features.

Image showing the solar panel and light fixture with a stainless steel bracket, indicating firm and reliable attachment.

The stainless steel bracket ensures firm and reliable mounting.

6. Operating Instructions

6.1. Power On

Locate the power switch on the side/bottom of the light fixture and switch it to the "ON" position to turn it on. Some models support a light-controlled mode; switch it to the "Auto" position, and the light fixture will automatically turn on after dark and automatically turn off at dawn.

6.2. Charging

No manual charging is required. Place the light fixture in direct sunlight; the solar panel will automatically absorb sunlight and store electrical energy. 6-8 hours of sufficient sunlight can provide 8-12 hours of nighttime lighting (actual duration depends on weather and sunlight intensity).

6.3. Lighting Modes

A short press of the mode button (or using the remote control) cycles through the lighting modes:

  • Strong Light Sensor Mode: Light activates at full brightness upon motion detection, then dims or turns off after a set period.
  • Dim Light Sensor Mode: Light stays dim, activates at full brightness upon motion detection, then returns to dim after a set period.
  • Strong Long Light Mode: Light stays on at full brightness continuously.
  • Motion Detection Mode: The light automatically turns on when it detects human activity and turns off after a 30-second delay when no one is around, making it more energy-efficient.
  • Constant Light Mode: Light stays on at a constant brightness.

You can customize the motion-triggered high-brightness duration (30 seconds, 3 minutes, or 10 minutes) via the remote control. The remote control can also be used to set timer lighting and adjust brightness levels.

Remote control for the solar street light, showing various buttons for mode selection and brightness adjustment.

Remote control for managing lighting modes and settings.

7. Maintenance

  • Cleaning: Regularly clean the solar panel surface to remove dust, dirt, leaves, or snow. A clean panel ensures maximum sunlight absorption and charging efficiency. Use a soft, damp cloth.
  • Inspection: Periodically check the mounting bracket and screws to ensure they are secure. Tighten any loose fasteners.
  • Battery Care: While the battery is designed for long life, ensure the light receives adequate sunlight daily to maintain battery health. Avoid prolonged periods of storage without charging.
  • Environmental Protection: The IP65 rating protects against dust and water jets, but avoid submerging the unit or exposing it to high-pressure water streams.

8. Troubleshooting

  • Light does not turn on at night:
    • Ensure the power switch is in the "ON" or "Auto" position.
    • Verify the solar panel is receiving direct sunlight for at least 6-8 hours during the day.
    • Check for any obstructions (e.g., trees, buildings) blocking sunlight to the panel.
    • Confirm the battery is charged. If it's been cloudy for several days, the battery might be low.
  • Light is dim or flickers:
    • Clean the solar panel and light sensor.
    • Ensure the light is fully charged.
    • Check if the light is in a dim mode setting. Adjust with the remote control.
  • Motion sensor not working:
    • Ensure the light is in a motion-sensing mode.
    • Check for obstructions in front of the sensor.
    • Verify the sensor's range and sensitivity settings via remote control.
  • Remote control not working:
    • Check the remote control battery.
    • Ensure there are no obstructions between the remote and the light.

9. User Tips

  • For best performance, install the solar light in a location that receives at least 6-8 hours of direct, unobstructed sunlight daily.
  • Utilize the motion sensor modes to conserve battery life and extend illumination throughout the night.
  • Experiment with different installation heights and angles to optimize both solar charging and lighting coverage for your specific area.
  • Take advantage of the intelligent mutual control feature by installing multiple Intelamp solar lights within 30 meters of each other for synchronized lighting.

10. Warranty and Support

This Intelamp Solar Street Light comes with a 2-year warranty.

Manufacturer Information:

Shenzhen Jindian Electronic Technology Co., Ltd
No. 9, Tianyang 1st Road, Datianyang Industrial Zone, Dongfang Community, Songgang Street, Bao'an District, Shenzhen City, Guangdong Province, China
Email: service@intelamp.com

EU Authorized Representative:

SUCCESS COURIER SL
CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain
Email: successservice2@hotmail.com

11. Compliance Information

This product must comply with all applicable safety and regulatory requirements in the market where it is sold. Our company has assessed the requirements and regulations applicable to this product based on its actual product type, function, and target market. The product meets the testing requirements of Shenzhen BCTC.

For Electrical or Electronic Products: relating to electrical safety, electromagnetic compatibility, or environmental compliance, conformity marking (e.g., CE) and related documentation may be required.

CE Mark indicating compliance with European safety standards.

CE Mark

A user manual (PDF) is also available for detailed item guides and documents. You can view it here.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.