1. Introduction
This manual provides detailed instructions for setting up and operating your KCEVE Wireless HDMI Extender Kit. This kit allows for wireless transmission of high-definition video and audio signals from various source devices to displays, projectors, or TVs, eliminating the need for long HDMI cables. Two models are available: WX001, supporting 4K@30Hz transmission up to 100 meters (328 feet), and WX002, supporting 1080P@60Hz transmission up to 200 meters (650 feet) with additional KVM functionality.
2. Package Contents
Please check the box for the following items, depending on your model:
Model WX001 Package
Image: Contents of the WX001 package, showing 1 User Manual, 2 Antennas, 1 Transmitter, 1 Receiver, 2 USB-A to C Cables, 2 HDMI Cables, and the Packaging Box.
- 1x Wireless HDMI Transmitter
- 1x HDMI Wireless Receiver
- 2x HDMI Cables
- 2x USB Data & Power Cables
- 2x External Antennas
- 1x User Manual
- 1x Packaging Box
- 2x 1/4 Camera Hot Shoe Adapters
Model WX002 Package
Image: Contents of the WX002 package, showing 1 User Manual, 2 Antennas, 1 Transmitter, 1 Receiver, 2 USB-A to C Cables, 2 HDMI Cables, and the Packaging Box.
- 1x Wireless HDMI Transmitter
- 1x HDMI Wireless Receiver
- 2x HDMI Cables
- 2x USB Data & Power Cables
- 2x External Antennas
- 1x User Manual
- 1x Packaging Box
3. Specifications
| Feature | Model WX001 | Model WX002 |
|---|---|---|
| Brand Name | KCEVE (AIMOS) | |
| High Definition Support | 4K@30Hz, 1080P@60Hz | 1080P@60Hz |
| Wireless Transmission Range | Up to 100M / 328Ft (unobstructed) | Up to 200M / 650Ft (unobstructed) |
| Wireless Type | FM (2.4G/5G dual-band transmission protocols) | |
| Interface | HDMI-Compatible, USB (for KVM on WX002) | |
| Content | Audio & Video | |
| KVM Function | No | Yes (Dedicated keyboard/mouse ports on RX) |
| Local Loop-out (TX) | No | Yes |
| Camera Hot-Shoe Mount | Yes (2x 1/4 adapters included) | No |
| Support Memory Card | No | |
| Support Apt-x | No | |
| Support AAC | No | |
| Certifications | CE, FCC, RoHS, UL | |
| Power Supply (Recommended) | 5V/1A (adapter not included) | |
Note: Transmission distance may vary depending on environmental factors such as walls, bricks, or glass, which can shorten signal coverage or cause severe signal loss.
4. Setup Instructions
The KCEVE Wireless HDMI Extender Kits are designed for plug-and-play operation and are pre-paired at the factory. No WiFi, app, or Bluetooth setup is required.
4.1 General Connection Steps (Both Models)
- Connect the external antennas to both the Transmitter (TX) and Receiver (RX) units.
- Connect the Wireless HDMI Receiver (RX) to your display device (Monitor/TV/Projector) using an HDMI cable.
- Power the Receiver (RX) using the included USB power cable and a 5V/1A power adapter (not included).
- Connect the Wireless HDMI Transmitter (TX) to your source device (PC/Laptop/Camera/Set-top Box) using an HDMI cable.
- Power the Transmitter (TX) using the included USB power cable and a 5V/1A power adapter (not included).
- Wait for approximately 5-15 seconds for the devices to automatically connect and begin casting.
Important Note: A 5V/1A power adapter is not included in the package and must be supplied by the user.
4.2 Model WX002 Specific Setup (with KVM and Loop-out)
For Model WX002, additional connections are available:
- KVM Function: Plug your keyboard and mouse into the dedicated K/M ports on the Receiver (RX) unit. Ensure the USB cable connecting the Transmitter (TX) to your laptop/PC supports both USB data transfer and power supply for KVM functionality.
- Local Loop-out: Connect an additional local monitor to the "Loopout" port on the Transmitter (TX) unit for zero-latency monitoring of the source signal.
WX002 Connection Diagram
Image: Detailed connection diagram for the WX002 model, illustrating how to connect the Transmitter (TX) to a laptop/PC with HDMI and USB for power, and the Receiver (RX) to a TV/Monitor with HDMI, USB for power, and keyboard/mouse for KVM functionality.
WX001 Connection Diagram
Image: Detailed connection diagram for the WX001 model, illustrating how to connect the Transmitter (TX) to a laptop/PC with HDMI and USB for power, and the Receiver (RX) to a TV/Monitor with HDMI and USB for power.
5. Operating Instructions
5.1 Basic Operation
- Once connected and powered on, the devices will automatically pair and display the source content on the connected display.
- The system supports both Mirror Mode (displaying the same content on both screens) and Extend Mode (extending your desktop across screens).
Image: Example of Mirror Mode and Extend Mode in a conference room setting, showing a laptop screen mirrored or extended to a large display.
5.2 KVM Function (Model WX002 Only)
The WX002 model allows you to control your source device (PC/Laptop) using a keyboard and mouse connected to the Receiver (RX) unit.
- Connect your keyboard and mouse to the USB ports labeled "K/M" on the Receiver (RX).
- Ensure the USB cable connecting the Transmitter (TX) to your PC/Laptop via a USB cable that supports both USB data transfer and power supply.
- You can now control your PC/Laptop from the location of your display.
Image: Illustration of the KVM function, showing a keyboard and mouse connected to the Receiver (RX) unit, allowing control of a laptop wirelessly connected to the Transmitter (TX).
5.3 Switching Between Portrait and Landscape Mode (Model WX002 Only)
The WX002 model offers the flexibility to switch display orientation:
- Press the "Pair" button on the Wireless Receiver (RX) twice in a row to enter switching mode.
- Press the "Pair" button on the Wireless Receiver (RX) once to cycle through and adjust to your desired angle (Portrait or Landscape).
Image: Step 1 for switching display mode, showing the Receiver (RX) unit and indicating to press the 'Pair' button twice.
Image: Step 2 for switching display mode, showing the Receiver (RX) unit and indicating to press the 'Pair' button once to adjust the angle.
6. Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Unstable connection, stuck, or frozen display |
|
| No signal / No display |
|
| KVM function not working (Model WX002) |
|
| Reduced transmission range or signal loss |
|
7. User Tips
- For optimal performance, especially with 4K content or KVM functionality, use a dedicated 5V/2A power adapter for both the Transmitter and Receiver units.
- While the devices are pre-paired, if you encounter pairing issues, refer to the full user manual for specific re-pairing instructions (not detailed here).
- Avoid placing the transmitter and receiver near other wireless devices that might cause interference.
- The wireless HDMI extender is not recommended for gaming due to potential minor latency.
8. Warranty and Support
KCEVE stands behind the quality of its products. For any issues, troubleshooting, or guidance, please contact KCEVE customer service. Refer to the product packaging or official website for specific warranty terms and contact information.