1. Important Safety Information
- WARNING: Do not use this product in humid environments.
- WARNING: Avoid areas with strong electromagnetic interference.
- WARNING: Always disconnect power before performing any installation or maintenance.
- CAUTION: When inserting or removing hardware components, exercise extreme care to avoid damaging motherboard pins or other delicate parts.
- CAUTION: Prevent electrostatic discharge (ESD) damage during installation by grounding yourself.
- CAUTION: Do not force insertion or removal of hardware components. If a component does not fit easily, recheck its orientation and compatibility.
2. Product Overview
The Jingsha H61M-I Motherboard Kit is a compact Mini ITX solution designed for desktop computing. This kit includes:
- 1x Jingsha H61M-I Motherboard
- 1x Intel Core i5-3470 CPU (3.2GHz, 4 Cores/4 Threads)
- 1x 8GB DDR3 1600MHz Desktop Memory Module
The H61M-I motherboard supports Intel processors with an LGA1155 socket and DDR3 desktop memory. It features an 8-layer PCB, all solid-state capacitors, and an aluminum heatsink for enhanced stability.
3. Setup and Installation
3.1. CPU Installation
Follow these steps to install the Intel Core i5-3470 CPU onto the motherboard:
- Open the pressure bar marked on the CPU socket.
- Open the buckle cover of the CPU base.
- Carefully place the CPU into the socket, paying attention to the four defenses (notches) and aligning the golden corner of the CPU with the golden corner of the motherboard socket. Ensure pins are not bent.
- Re-buckle the previously opened lever to secure the CPU.
3.2. Memory (RAM) Installation
To install the 8GB DDR3 1600MHz memory module:
- Locate the DDR3 memory slots on the motherboard.
- Align the notch on the memory module with the key in the memory slot.
- Press down firmly on both ends of the memory module until the retention clips snap into place.
Note: The memory module PCB color (black or green) may vary by batch and does not affect functionality.
3.3. M.2 SSD Installation
The H61M-I motherboard supports NVMe M.2 SSDs. Follow these steps for correct installation:
- Locate the M.2 slot on the motherboard.
- Insert the M.2 SSD into the slot at an angle.
- Gently push down the SSD and secure it with the provided screw to prevent it from falling off due to stress.
3.4. Power Connections
Connect the 24-pin ATX main power connector and the 8-pin ATX 12V power connector from your power supply to the corresponding ports on the motherboard.
3.5. General Precautions During Installation
- Ensure adequate ventilation and heat dissipation for all components.
- A powerful power supply (at least 500W brand power supply) is recommended for stable operation.
- The CR2032 battery for the CMOS will be removed before shipment due to shipping regulations. You will need to install one upon receipt.
3.6. Installation Video Guide
Watch this video for a visual demonstration of CPU and RAM installation:
Video demonstrating the installation of CPU and RAM onto the H61M-I motherboard.
4. Operating Instructions
After completing all hardware installations and connections:
- Connect your display, keyboard, and mouse to the appropriate ports on the motherboard's rear I/O panel.
- Connect the power cord to your power supply and turn on the power switch.
- Press the power button on your computer case. The system should initiate the boot process.
- Follow the on-screen prompts to install your operating system.
5. Maintenance
- Regularly clean dust from inside your computer case to ensure optimal airflow and prevent overheating.
- Ensure all fans (CPU fan, case fans) are functioning correctly to maintain adequate ventilation and heat dissipation.
- Keep the system in a well-ventilated area, away from direct sunlight and heat sources.
6. Troubleshooting (FAQ)
6.1. System Fails to Power On
- Verify that all power connections (24-pin ATX, 8-pin ATX 12V) to the motherboard are secure.
- Ensure the CPU and memory modules are properly installed and seated in their respective sockets.
- Check if the power supply is functioning correctly and provides sufficient wattage (at least 500W recommended).
6.2. Blue Screen of Death (BSOD)
- Update the motherboard BIOS to the latest version.
- Verify hardware compatibility for all installed components, especially RAM and any add-on cards.
- Run memory diagnostic tools to check for faulty RAM modules.
6.3. Hard Drive Not Recognized
- Confirm that the SATA data and power cables are correctly connected to both the hard drive and the motherboard.
- Check BIOS settings to ensure the SATA ports are enabled and the drive is detected.
- For M.2 SSDs, ensure it is an NVMe M.2 type, as SATA M.2 is not supported by this motherboard.
7. Specifications
| Feature | Detail |
|---|---|
| Part# | H61M-I Motherboard |
| Form Factor | Mini-ITX |
| Dimensions | 170mm x 170mm |
| CPU Socket | LGA 1155 (Supports Intel Core processors) |
| Chipset | Intel H61 |
| Included CPU | Intel Core i5-3470 (4 Cores/4 Threads, 3.2GHz, 6MB L3 Cache, 77W TDP) |
| Number Of Memory Slots | 2 |
| Support Memory Type | DDR3 (1.5V standard voltage, non-ECC) |
| Memory Channel | Double |
| Maximum RAM Capacity | 16 GB |
| Included RAM | 8GB DDR3 1600MHz (1x 8GB) |
| Display Ports | HD, VGA |
| Sound Card | Realtek ALC662 HD 5.1 |
| Network | 1000 Mbps Ethernet (1x RJ45) |
| Number of SATA Ports | 2 (SATA 2.0) |
| Number of M.2 Slots | 1 (M.2 NVMe / NGFF, supports 2280) |
| Graphic Socket | 1* PCI-E 3.0 / 2.0 X16 |
| Number of PCI | 1 |
| USB Interface | 8*USB2.0 (4 rear, 2 internal headers for 4 front) |
| PSU Connector | 24-pin ATX + 8-pin ATX_12V |
| Onboard Connectors & Header | 24-pin Main Power, CPU Fan, AAFP, F_DEBUG, F_AUDIO, F_SPK, 3-pin CPU_FAN, 3-pin SYS_FAN |
8. Warranty and Support
- The included CPU is used but in good condition and comes with a 1-year warranty.
- A warranty label is present on the back of the CPU. Do not tear it off, as it serves as proof of purchase for warranty claims. The label does not affect CPU usage.
- BIOS files and drivers for the motherboard are available. Please contact customer service to obtain these files if needed.
For further assistance, you may refer to the official user manual PDF: H61M-I Motherboard User Manual (PDF)
9. User Tips
- Power Supply: Ensure your power supply is at least 500W from a reputable brand for stable system operation.
- Memory Compatibility: The motherboard supports 1.5V standard voltage, non-ECC, DDR3 desktop memory.
- M.2 SSD Type: Only NVMe M.2 SSDs are supported. SATA M.2 SSDs are not compatible with this motherboard.
- BIOS/Drivers: If you encounter issues or need to update, contact customer service for the latest BIOS files and drivers.
- Visual Inspection: Always perform a thorough visual inspection of components before and after installation to ensure no physical damage or incorrect seating.