1. Introduction
Thank you for choosing the iScooter i9m Electric Scooter. This manual provides essential information for the safe assembly, operation, and maintenance of your new electric scooter. Please read this manual thoroughly before your first ride to ensure optimal performance and safety.

Image 1.1: iScooter i9m Electric Scooter overview with key features.
2. Important Safety Warnings
Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.
- Always wear a helmet and other protective gear (knee pads, elbow pads) while riding.
- Do not ride in wet conditions, heavy rain, or through puddles deeper than 2 cm.
- Avoid riding on slippery surfaces, loose gravel, or steep inclines.
- Ensure all bolts and quick releases are securely fastened before each ride.
- Familiarize yourself with local laws and regulations regarding electric scooter usage.
- Do not perform stunts or sudden maneuvers.
- Keep hands and feet away from moving parts.
- This scooter is designed for one rider only. Do not carry passengers.
3. Package Contents
Your iScooter i9m package should contain the following items:
- iScooter i9m Electric Scooter (main body)
- Handlebar assembly
- Charging adapter
- User Manual (this document)
- Assembly tools (e.g., Allen wrenches)
Please inspect all components upon unboxing. If any items are missing or damaged, contact customer support immediately.
4. Assembly
The iScooter i9m comes partially assembled. Follow these steps to complete the assembly:
- Carefully remove the scooter and all components from the packaging.
- Lift the stem of the scooter until it locks into the upright position.
- Attach the handlebar assembly to the stem. Ensure the cables are not pinched.
- Secure the handlebar with the provided screws and tools.
- Check all connections and ensure the folding mechanism is securely locked.
- Inflate tires to the recommended pressure if necessary.
For a visual guide, please refer to the official unboxing and assembly video:
Video 4.1: Official Unboxing and Assembly Guide for the iScooter i9m.
5. Charging the Battery
The iScooter i9m is equipped with a 36V 7.5Ah high-capacity lithium battery, offering a range of up to 30km. It features a 6-layer safety protection Battery Management System (BMS) for real-time monitoring of battery safety, protecting against overcharging, over-discharging, short circuits, and overheating.
- Before first use, fully charge the scooter for 4-6 hours.
- Locate the charging port, usually on the side of the deck.
- Connect the charging adapter to the scooter, then plug it into a power outlet.
- The indicator light on the charger will typically turn red during charging and green when fully charged.
- Do not leave the scooter charging unattended for extended periods.
- Always use the original charger provided with your scooter.

Image 5.1: Long Life Battery & BMS Battery Management System details.
6. Operation
6.1 Power On/Off
Press and hold the power button on the handlebar display to turn the scooter on or off.
6.2 LCD Intelligent Riding Display
The integrated LCD display provides real-time information:
- Real-time Speed: Shows your current speed.
- Speed Unit: Displays speed in km/h or mph.
- Headlight & Taillight Indicator: Shows if lights are active.
- Riding Mode: Indicates the current speed mode (e.g., ECO, D, S).
- App Connected: Shows if the scooter is connected to the Tuya App.
- Cruise Control: Indicates if cruise control is active.
- Battery Level: Displays the remaining battery charge.
- Motor Overheating: A warning will appear if the motor temperature is too high. If this occurs, stop riding and allow the motor to cool down before resuming use.

Image 6.1: LCD Intelligent Riding Display features.
6.3 Riding
- Place one foot on the deck and push off with the other foot.
- Once you have some momentum, gently press the accelerator lever.
- Place your other foot on the deck.
- To slow down, release the accelerator. To brake, use the brake levers.
6.4 Lighting
The scooter is equipped with a headlight and rear light for improved visibility. Activate them via the controls on the handlebar.
6.5 Braking System
The i9m features a dual braking system for safe and efficient stopping:
- Rear Wheel Disc Brake: Provides strong mechanical braking power.
- Hidden Electronic Brake (E-ABS): Offers additional braking and regenerative energy recovery.

Image 6.2: Front Electronic Brake & Rear Wheel Disc Brake.
6.6 Smart APP (Tuya App)
Connect your iScooter i9m to the Tuya App for additional features and customization. Refer to the app's instructions for pairing and usage.
7. Folding and Storage
The i9m features a 3-second foldable design, making it compact and portable for easy transport and storage. It weighs approximately 29 lbs (13.15 kg).
- Ensure the scooter is powered off.
- Locate the folding mechanism on the stem.
- Follow the instructions to release the locking mechanism and fold the stem down towards the deck.
- Secure the folded position if there is a latch.
- The compact size allows it to fit in car trunks or under desks.

Image 7.1: 3-Second Easy Fold feature.
8. Maintenance
8.1 Tires
The scooter is equipped with 10-inch wear-resistant pneumatic tires, designed for good shock absorption, adaptability, and anti-slip properties. They feature a rubber anti-puncture layer, inner liner layer, and anti-puncture protective layer.
- Regularly check tire pressure and inflate to the recommended PSI.
- Inspect tires for wear, cuts, or punctures before each ride.

Image 8.1: 10 Inch Wear-Resistant Pneumatic Tire construction.
8.2 Brakes
- Periodically check the brake levers and cables for proper tension and function.
- Inspect the disc brake pads for wear and replace them if necessary.
8.3 General Cleaning
- Wipe down the scooter with a damp cloth after use.
- Avoid using high-pressure water jets directly on electrical components.
9. Specifications
| Feature | Specification |
|---|---|
| Model Number | i9m |
| Brand Name | iScooter |
| Category | Two-wheel Scooter, Foldable Scooter |
| Applicable People | Unisex |
| Power (Motor) | 500W |
| Voltage | 36V |
| Battery Capacity | 7.5Ah |
| Charging Time | 4-6 hours |
| Range Per Charge | Up to 30km |
| Max Speed | 35km/h (approx. 22mph) |
| Tire Size | 10 inch (Pneumatic) |
| Brake System | Rear wheel disc brake + hidden electronic brake |
| LED Lights | Headlight and Rear |
| Smart APP | With Tuya App |
| Folded | Yes |
| Max Loading | 120kg |
| Net Weight | 18.5kg (approx. 29 lbs) |
| Max Incline | 15° |
| Certification | CE |
| Origin | Mainland China |
10. Troubleshooting
This section addresses common issues you might encounter with your iScooter i9m.
- Motor Overheating Warning: If the LCD display shows a high temperature warning, this indicates the motor is overheating due to high speed, steep slopes, or prolonged use. The scooter will limit speed to protect the motor. Stop riding immediately and allow the motor to cool down before resuming use.
- Brake Rubbing: If the brake disc pads are rubbing against the wheel even when the brake is not engaged, this indicates incorrect installation or adjustment. Inspect the brake caliper and disc for alignment. Adjust the caliper position or brake cable tension as needed. If unsure, consult a professional.
- Scooter Not Powering On: Ensure the battery is sufficiently charged. Check all cable connections for looseness.
- Reduced Range/Power: This could be due to low tire pressure, riding on inclines, heavy loads, or cold weather. Ensure tires are properly inflated and the battery is fully charged.
11. User Tips
- Utilize the Tuya App: Connect your scooter to the Tuya App to configure settings and customize your riding experience. This can help optimize performance and personalize features.
- Regular Tire Checks: Keep your 10-inch pneumatic tires properly inflated. This not only ensures a smoother ride but also helps prevent punctures and extends battery range.
- Brake Familiarization: Practice using both the electronic and disc brakes in a safe, open area to get a feel for their response and stopping power.
12. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your purchase or contact the iScooter customer service directly. Keep your proof of purchase for any warranty claims.