1. Product Overview
Thank you for purchasing this Netcosy 24W DC power adapter. This adapter provides a stable DC output voltage with a standard 3.5mm × 1.35mm DC plug. It is suitable for various low-power electronic devices such as routers, small surveillance equipment, LED light strips, and portable speakers, ensuring a safe and efficient power supply.

2. Product Specifications
| Parameter | Specification Value |
|---|---|
| Model | XWL2435 |
| Input Voltage | AC 100-240V~50/60Hz 0.6A Max |
| Output Voltage | DC 12V/2A |
| Rated Power | 24W Max |
| DC Plug Specification | 3.5mm (Outer Diameter) × 1.35mm (Inner Diameter) |
| Protection Performance | OVP (Over Voltage Protection), OCP (Over Current Protection), SCP (Short Circuit Protection), OTP (Over Temperature Protection) |
| Shell Material | Flame-retardant ABS material |
| Operating Temperature | 0°C~40°C |
| Storage Temperature | -10°C~60°C |
| Voltage Range | Low voltage non-USB (below 75V DC, below 50V AC) |
| Connection Type | Plug In |
| Origin | Mainland China |
| High-concerned chemical | None |


3. Important Safety Instructions
3.1. Prohibited Behaviors
- Do not use in humid, high-temperature (exceeding 40°C), dusty, flammable, or explosive environments (e.g., bathrooms, near kitchen stoves, gas stations). Prevent liquid from splashing onto the adapter.
- Do not overload the adapter. It is only suitable for devices with rated power ≤24W and input voltage matching the adapter's output voltage. Series connection with other power supply devices is strictly prohibited.
- Do not disassemble, modify, or repair the adapter yourself. If the case is damaged, the power cord is aging, abnormal heating, or abnormal noise occurs, stop using it immediately and contact after-sales service.
- Keep away from children and prevent them from operating alone. Avoid touching live parts such as plugs and DC interfaces. Hold the plug body when inserting or pulling out; do not pull the power cord.
- Do not block the adapter's heat dissipation holes. Ensure good ventilation during use, and avoid long-term extrusion or exposure to direct sunlight.
3.2. Warnings & Safety Precautions
⚠ WARNING
- Do NOT disassemble, modify, puncture, crush, or burn; risk of electric shock, fire, or explosion.
- This is NOT a toy. Keep away from children.
- Prevent pets from biting the power cord or adapter.
- For INDOOR DRY USE ONLY. Do not expose to rain, water, or moisture.
- If the cable/plug is damaged, or if overheating, noise, smoke, or smell occurs, disconnect power immediately.
- Do not use in high temperature, humid, dusty, flammable, or explosive areas.
- Do not place on a bed, sofa, carpet, or any soft flammable surface during use.
- Use only for 12V 2A compatible devices. Do not use with incorrect voltage/current/connector.
- Hold the plug firmly when connecting or disconnecting; do not pull the cable.
- Keep the adapter well ventilated during use. Do not cover or wrap it.
- Unplug before cleaning. Wipe with a dry soft cloth only. Do not use water or liquid cleaners.
- Do not drop the adapter; prevent falling and injury.
- Unplug when not in use for a long time.
4. Setup and Connection
- Confirm Device Compatibility: Before use, check that your device's rated voltage and current match the adapter's output parameters (12V/2A). Also, confirm that your device's DC interface size is compatible with the adapter's 3.5mm × 1.35mm DC plug.
- Connect to Power: First, insert the AC plug of the adapter into a fixed wall socket that complies with national standards (AC 100-240V~).
- Connect to Device: Next, smoothly insert the DC plug into your device's power input interface, ensuring a secure connection without looseness.
5. Operating Instructions
- Start the Device: Once the adapter is securely connected to both the power outlet and your device, turn on your device according to its normal operating procedure. The adapter will automatically match the voltage and current required by the device to provide a stable power supply.
- Disconnect Power: After using the device, first turn off the device's power. Then, disconnect the DC plug from the device, followed by pulling out the AC plug from the wall socket. This sequence helps avoid "hot plugging" and potential damage.
- Storage: When not in use for a long time, be sure to cut off the power and store the adapter properly in a dry, cool, and ventilated place.
6. Maintenance
- Avoid dropping, colliding, or squeezing the adapter to prevent case damage and internal component failure.
- When storing for a long time, disconnect all connections and store the adapter in a dry, cool, and ventilated place to avoid moisture and oxidation.
- Do not over-bend or wrap the power cord to prevent insulation layer damage. Stop using immediately if the power cord is damaged.
- Regularly check whether the DC plug and AC plug are oxidized or loose. Address any issues promptly or contact after-sales service.
- Disconnect the power before cleaning. Wipe surface dust with a dry soft cloth; do not rinse with water or use chemical cleaners.
7. Troubleshooting
| Fault Phenomenon | Possible Causes | Solutions |
|---|---|---|
| Adapter has no power, indicator light is off |
|
|
| Device cannot be powered normally |
|
|
| Adapter heats up severely |
|
|
| Output voltage is unstable |
|
|
8. Warranty and Support
Manufacturer: Shenzhen XinWangLiTuo Trading Co., Ltd.
Production Address: 603, Building B3, No. 4233, Baoan Avenue, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China
Production Date: Please refer to the product label.
Kind Reminder: Please read this manual carefully before use. If you have any questions about product use, please contact after-sales customer service for assistance.
For further details, you may refer to the original user manual (PDF).