iScooter F3

Contents

iScooter F3 Electric Scooter User Manual

Model: F3

Brand: iScooter

Important Safety Information

Disclaimer:

Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.

General Safety Guidelines

  • Always wear a helmet and appropriate protective gear (knee pads, elbow pads) when riding.
  • Familiarize yourself with local laws and regulations regarding electric scooter usage before riding.
  • Do not ride in wet conditions, heavy rain, or through puddles deeper than 1 inch.
  • Avoid riding on uneven surfaces, potholes, or over obstacles that could cause loss of control.
  • Maintain a safe distance from other vehicles, pedestrians, and obstacles.
  • Do not perform stunts or sudden maneuvers.
  • Ensure the scooter is properly maintained and all components are securely fastened before each ride.
  • Do not allow children or individuals with reduced physical, sensory, or mental capabilities to use the appliance without supervision and instruction.

CE Warning

This appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure they do not play with the appliance.

FCC SDOC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Package Contents

Ensure all items are present and in good condition upon unboxing:

ItemDescription
ScooteriScooter F3 Electric Scooter
Seatpost Limit Bolt & NutFor securing the seatpost
Spare Inner TubeReplacement inner tube for tires
Ignition KeyKey for powering on/off and lights (2 included)
Rear Basket & Mounting HardwareStorage basket for the rear of the scooter
Wrench KitTools for assembly and adjustments
User Manual & Safety InstructionsThis document and other safety guidelines
ChargerPower adapter for charging the scooter battery

The package includes: Electric Scooter*1, Charger*1, Key*2, Basket*1, manual*1.

What's in the box: iScooter F3 Electric Scooter, Charger, 2 Keys, Basket, and Manual

What's in the box: iScooter F3 Electric Scooter, Charger, 2 Keys, Basket, and Manual.

Product Overview

Familiarize yourself with the main components of your iScooter F3:

iScooter F3 Electric Scooter with 10-inch tire, basket, and seat

The iScooter F3 Electric Scooter featuring a 10-inch tire, basket, and seat. Key features include 60km max range, 45km/h max speed, 1000W motor, and 13Ah battery capacity.

Diagram of iScooter F3 components

Diagram illustrating the various components of the iScooter F3 Electric Scooter.

  1. Display & Button
  2. Throttle
  3. Brake Lever
  4. Handlebar Height Adjustment Clamp
  5. Folding Latch & Lock Ring
  6. Headlight
  7. Charging Port
  8. Ignition Keyhole
  9. Bell
  10. Seat
  11. Rear Basket
  12. 2-in-1 Taillight & Brake Light
  13. Seatpost Taillight Mount
  14. Kickstand

Setup and Assembly

1. Unfolding the Scooter

Step 1: Connect T-handlebar

Connect the T-handlebar to the handlepost, then lift the handlebar to the riding position.

Connecting the T-handlebar to the handlepost

Image showing the T-handlebar being connected to the handlepost.

Step 2: Secure Folding Latch

Close the folding latch securely, then rotate the lock ring to lock the folding latch in place.

Securing the folding latch and lock ring

Image demonstrating how to secure the folding latch and engage the lock ring.

Note:

After closing the folding latch, adjust the brake levers to your desired angles, then tighten the bolts.

2. Adjusting Handlebar and Seat

Step 1: Adjust Handlebar Height

Adjust the handlebar to your desired height, then tighten the clamp firmly.

Adjusting handlebar height

Image showing the adjustment of the handlebar height.

Step 2: Install and Adjust Seatpost

Lift the seat until you can insert the seatpost limit bolt into the side holes at the lower end of the seat tube and fully tighten the bolt or nut. Then, adjust the seat height as desired and firmly tighten the seatpost clamp.

Installing and adjusting the seatpost

Image illustrating the installation and adjustment of the seatpost.

Warning:

Pay attention to the minimum insertion marks on both the T-handlebar and seatpost.

3. Installing the Rear Basket and Taillight

The taillight is pre-installed on the seatpost. To install it on the rear basket, follow these steps:

Step 1: Disconnect Taillight Cable and Remove from Seatpost

Disconnect the power cable of the pre-installed taillight on the seat tube. Remove the taillight's bolts, then the taillight.

Disconnecting taillight cable and removing from seatpost

Image showing how to disconnect the taillight cable and remove the taillight from the seatpost.

Step 2: Attach Taillight to Rear Basket

Attach the taillight on the back of the rear basket, then tighten its bolts.

Attaching taillight to rear basket

Image demonstrating how to attach the taillight to the rear basket.

Step 3: Attach Basket Brackets to Rear Basket

Attach the basket brackets to the rear basket, then tighten their bolts securely.

Attaching basket brackets to rear basket

Image showing the attachment of basket brackets to the rear basket.

Step 4: Attach Rear Basket to Scooter and Reconnect Taillight

Attach the rear basket to the scooter, tighten its bolts, then reconnect the power cable of the taillight.

Attaching rear basket to scooter and reconnecting taillight

Image illustrating the final attachment of the rear basket to the scooter and reconnection of the taillight power cable.

Operating Instructions

Basic Operations

  • Power ON: Insert the ignition key into the keyhole, then turn it clockwise until you hear the first click.
  • Power OFF: Turn the ignition key counterclockwise to the end.
  • Headlight ON/OFF: After turning on the scooter, turn the ignition key clockwise until you hear the second click to turn on the headlight and taillight.
  • Switch Riding Mode: Press the M button twice.
  • Imperial/Metric System: Press the M button 3 times.
  • VOL/TRIP/ODO: Hold the M button for 3 seconds.

LCD Intelligent Riding Display

LCD Intelligent Riding Display

Close-up of the scooter's LCD display showing various riding metrics.

  1. Brake Applied
  2. Real-time Speed
  3. VOL: Battery Voltage, TRIP: Trip Distance, ODO: Total Distance
  4. Battery Level
  5. M Button
  6. Riding Mode

Speed Mode Demonstration Interface

Speed Mode Demonstration Interface

Three LCD screens demonstrating the different speed modes available on the iScooter F3.

Riding ModeEuropean Max SpeedNorth American Max Speed
ECO6 km/h9 mph (14 km/h)
TOUR15 km/h21 mph (33 km/h)
SPORT25 km/h28 mph (45 km/h)

Cracking Speed Method: After turning on the device, hold the brake handle and press the "M" button 5 times to break the speed limit. Press the "M" button twice to switch gears. The factory-set speed gears are 6/15/25km/h, and the gears after cracking the speed limit are 15/35/45km/h, with the default kilometer.

Folding and Portability

The iScooter F3 features a one-step quick folding mechanism for easy storage and portability. It can be easily stored in a car trunk or carried when not in use.

Fast Folding mechanism of the iScooter F3

Image demonstrating the fast folding mechanism, allowing the scooter to be easily stored in a car trunk.

Lighting System

The scooter is equipped with an LED Headlight for front illumination and a Warning Taillight for rear visibility, enhancing safety during rides, especially in low-light conditions.

LED Headlight and Warning Taillight

Images showing the illuminated LED Headlight and Warning Taillight for enhanced visibility.

Braking System

The iScooter F3 is equipped with dual front and rear drum brakes, along with a power-off electronic brake mechanism. This system provides precise, reliable stopping power and improved safety.

Front and Rear Drum Brakes & Power-Off Electronic Brake

Image illustrating the front and rear drum brakes and the electronic brake lever, highlighting the scooter's safety features.

Official product video demonstrating the iScooter F3 in use, showcasing its features like folding, speed modes, range, lights, and brakes.

Charging Your Scooter

The iScooter F3 is equipped with a 48V 13Ah battery and a Battery Management System (BMS) for 6-layer safety protection, including Short Circuit Protection (SCP), Overcurrent Protection (OCP), Discharge Current Protection (DCP), Over-discharge Protection (ODP), Temperature Protection (TP), and Low Voltage Alarm System (LVAS).

Long Life Battery & BMS Battery Management System

Image showing the battery compartment with the 48V 13Ah battery pack and icons representing the 6-layer safety protection provided by the BMS.

  • The scooter is fully charged when the charger indicator changes from red to green.
  • With charging protection, the scooter will automatically cut off charging after a full charge. However, it is not recommended to overcharge.
  • Keep the charging port cover closed when not charging to prevent dust and moisture ingress.
  • During charging, the scooter cannot be turned on.
  • Charging Time: Approximately 6-7 hours.

Maintenance

General Maintenance

  • Cleaning: Regularly wipe down the scooter with a damp cloth. Do not use high-pressure water jets or corrosive cleaners.
  • Tires: Check tire pressure regularly. The F3 uses 10-inch pneumatic tires. Ensure they are properly inflated for optimal performance and safety.
  • Brakes: Periodically check the brake levers and drum brakes for proper function and wear. Adjust if necessary.
  • Fasteners: Ensure all bolts and screws are tight before each ride.
  • Storage: Store the scooter in a dry, cool place away from direct sunlight and extreme temperatures.

Battery Care

  • Avoid completely draining the battery.
  • Charge the battery regularly, even if the scooter is not in use for extended periods (e.g., once a month).
  • Do not expose the battery to extreme heat or cold.

Disposal of Electrical and Electronic Equipment

The crossed-out garbage can symbol indicates that this device must be disposed of separately from unsorted municipal waste. Disposal via the residual waste bin or the yellow bin is prohibited. If the products contain batteries or rechargeable batteries that are not permanently installed, they must be removed before disposal and disposed of separately as a battery.

Troubleshooting: Error Codes

If you encounter any issues, the LCD display may show an error code. Refer to the table below for common error codes and their meanings. If an error persists, contact customer support.

CodeMeaning / Significance
E10Communication Fault
E14Throttle Fault
E15Brake Lever Fault
E16Motor Hall Sensor Fault
E50Over-Voltage

Specifications

FeatureSpecification
Unfolded Size40.6 x 21.9 x 37.4 in (1030 x 555 x 950 mm)
Folded Size40.6 x 21.9 x 24 in (1030 x 555 x 610 mm)
Weight44.8 lbs (20.3 kg)
Battery Capacity48 V, 13 Ah
Motor Power1000 W
Wheel Diameter10 in.
Range Per Charge34-37 miles (55-60 km)
Max Load Capacity264 lbs (120 kg)
Recommended Age14+
Operating Temperature28.4°F-95°F (-2°C-35°C)
Charger InputAC 100-240 V, 50/60 Hz
Charger OutputDC 54.6 V, 2 A
Charging Time6-7 h
Waterproof RatingIPX4

*Range is measured under conditions of 100% battery level, 154 lbs (70 kg) load, and 9 mph (15 km/h) speed. Actual range may vary based on load, humidity, wind speed, and riding habits. The scooter is designed to support a maximum 264 lbs (120 kg) load. For best riding experience, 70% of the maximum load is recommended.

User Tips

  • Speed Limiter: To unlock the full speed of 45 km/h, turn on the scooter, hold the brake handle, and press the "M" button 5 times. This will crack the speed limit.
  • Ride Comfort: The scooter does not include built-in suspension. For a smoother ride, especially on uneven terrain, consider purchasing an aftermarket suspension seat post.
  • Road Handling: Be aware that the scooter may feel unstable on very bumpy roads. Exercise caution and reduce speed on such surfaces.
  • Battery Life: While the scooter has a 48V 13Ah battery, actual range can vary. Some users have reported the battery running out faster than expected, especially on inclines or with heavier loads. Plan your trips accordingly and monitor the battery level.
  • Assembly: Ensure all nuts and bolts, especially for the rear rack and seat block, are properly secured during assembly. Double-check for any missing parts.

Warranty and Support

For any issues related to riding, maintenance, safety, or errors/faults with your electric scooter, please contact iScooter Customer Service.

Contact Information

Manufacturer

Shenzhen Xincheng Times Technology Co., Ltd.
Add: 104-105, Block C, Donghai Wang Building, No.369 Bulong Road, Ma'antang Community, Bantian Street, Longgang District, Shenzhen

Additional Resources

A detailed user manual in PDF format is available. You can view it here: iScooter F3 User Manual (PDF)

© 2024 iScooter. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.