1. Introduction
The Lemorele TC73-PLUS USB C Docking Station is a versatile 6-in-1 hub designed to expand the connectivity of your USB-C enabled laptop, particularly MacBook Pro/Air models, as well as Windows and Linux devices. It allows you to connect multiple external accessories and displays through a single USB-C port, enhancing your productivity and workspace.
This docking station features dual HDMI outputs, three USB 3.0 ports, and a 100W Power Delivery (PD) port, enabling high-speed data transfer, 4K video output, and simultaneous charging.
2. Key Features
- 6-in-1 Connectivity: Includes 3x USB 3.0 ports, 2x HDMI ports, and 1x USB-C Power Delivery port.
- Dual HDMI Output: Supports 4K@30Hz and 1080P@60Hz resolutions for extended or mirrored displays.
- Multi-Stream Transport (MST): Enables extended desktop functionality across multiple monitors for both Windows and macOS (macOS 10.15 and above).
- High-Speed Data Transfer: USB 3.0 ports offer data transfer speeds up to 5Gbps.
- Power Delivery (PD 100W): Provides up to 85W charging for your laptop while using other hub functions.
- Compact Design: Slim and portable, made from aircraft-grade alloy.
3. Setup Instructions
3.1 Initial Connection
Connect the USB-C cable from the docking station to your laptop's USB-C port.
3.2 UDisplay Driver Installation
The UDisplay driver must be installed for the docking station to function correctly, especially for extended display modes. The driver is typically accessed via a virtual CD-ROM drive that appears upon initial connection.
3.2.1 For Windows Systems (Windows 10 and above)
- Connect the docking station to your computer.
- Open "My Computer" or "This PC". You should see a new drive labeled "CD Drive (E:) UDisplay" (or similar).
- Double-click this drive to run the UDisplay program.
- Follow the on-screen prompts to install the driver. Your computer may restart during this process, which is normal.
- After installation, the connection status should display as "connected", and the screen can be displayed.
3.2.2 For macOS Systems (macOS 10.15 and above)
- Connect the docking station to your MacBook.
- A CD-ROM driver icon (UDisplay) will appear in the upper right corner of your desktop. Click on it to install the UDisplay application.
- The first use requires granting specific permissions:
- Screen Recording: Go to System Settings > Privacy & Security > Screen Recording and enable UDisplay. You may need to enter your password and click "Modify Settings".
- Accessibility: Go to System Settings > Privacy & Security > Accessibility and enable UDisplay.
- Input Monitoring: Go to System Settings > Privacy & Security > Input Monitoring and enable UDisplay.
- After enabling permissions, you may be prompted to "Quit & Reopen" UDisplay. Do so to apply changes.
- Once these settings are completed, the screen can be projected.
4. Operating Instructions
4.1 Multi-Stream Transport (MST) Display
The docking station supports MST functionality, allowing you to extend your desktop across multiple external monitors. This creates a larger workspace for enhanced productivity.
- Mirror Mode (A-A-A): All displays (laptop and external monitors) show the same content.
- Extend Mode (A-B-C): Each display shows different content, effectively extending your desktop.
To activate Extend Mode, ensure the UDisplay application is running and the "Extended screen" option is toggled "On" within the UDisplay settings.
4.2 Data Transfer
Utilize the three USB 3.0 ports for connecting external devices such as USB drives, external hard drives, keyboards, mice, and printers. These ports support data transfer speeds of up to 5Gbps, allowing for quick and stable transfer of large files.
4.3 Power Delivery (PD)
The USB-C PD port supports up to 100W power input, providing up to 85W charging to your connected laptop. This allows you to power your laptop and use the docking station's features simultaneously without worrying about battery drain.
4.4 4K UHD Resolution
The docking station supports up to 4K@30Hz resolution via one HDMI port, and 1080P@60Hz via the other. The 4K interface is plug-and-play, providing clear picture quality. The 1080P HDMI interface requires the UDisplay driver for initial use.
5. Maintenance
- Keep the docking station clean by wiping it with a soft, dry cloth.
- Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
- Do not attempt to disassemble or repair the device yourself. Contact support if issues arise.
- Ensure proper ventilation around the device during use.
6. Troubleshooting
- No Display Output:
- Ensure the UDisplay driver is correctly installed for your operating system (Windows 10+ or macOS 10.15+).
- For macOS, verify that "Screen Recording", "Accessibility", and "Input Monitoring" permissions are granted to UDisplay in System Settings > Privacy & Security.
- Check all cable connections (USB-C to laptop, HDMI to monitors).
- Confirm that your external monitors are powered on and set to the correct input source.
- Restart your computer and the docking station.
- Extended Mode Not Working (macOS):
- Confirm that your Mac's display settings recognize the external monitors as built-in displays.
- Ensure the "Extended screen" option is enabled within the UDisplay application.
- Slow Data Transfer:
- Ensure you are using USB 3.0 compatible devices and cables.
- Avoid connecting too many high-bandwidth devices simultaneously if performance is critical.
- Charging Issues:
- Ensure your power adapter is connected to the docking station's PD port and is capable of delivering sufficient power (e.g., 100W).
- Verify that your laptop supports USB-C Power Delivery.
- General Instability:
- Ensure your operating system is up to date.
- Check for any available firmware updates for the docking station. Refer to the official user manual PDF for details on "Equipment upgrade steps".
For more detailed troubleshooting and driver updates, please refer to the official user manual PDF: Lemorele TC73-PLUS User Manual (PDF).
7. Specifications
| Attribute | Value |
|---|---|
| Model Number | TC73-PLUS |
| Brand Name | Lemorele |
| Interface Type | USB Type-C |
| Ports | 6 (3x USB 3.0, 2x HDMI, 1x USB-C PD) |
| Standard | USB 3.0 |
| Function | USB-A, HDMI-Compatible |
| Compatible Systems | Windows (10 and above), macOS (10.15 and above), Linux (not supported for MST) |
| Compatible PC Devices | Laptop |
| Material | Acrylonitrile Butadiene Styrene |
| Length | 15cm |
| Power Delivery | Up to 100W |
| HDMI Output 1 | 4K@30Hz |
| HDMI Output 2 | 1080P@60Hz (requires UDisplay driver) |
| Certification | CE, RoHS, FCC |
| Origin | Mainland China |
8. Warranty and Support
For product support, technical assistance, or warranty inquiries, please contact the manufacturer or distributor:
- Distributor: Shenzhen ShafanTechnology co.,Ltd
- Brand Owner: Shenzhen Qixing LongyuanTechnology co.,Ltd
- Address: RM.808, No.1 Binhai Bay, RD.Yanxing, Dist. Bao'an, Shenzhen City, Guangdong Province, China
- Email Support: support@lemorele.com
This product does not record any personal data, ensuring your privacy and security during use.