ANDELI MCT-520DPL PRO

Contents

ANDELI MCT-520DPL PRO Multi-Function Welder Instruction Manual

Model: MCT-520DPL PRO

1. Introduction

The ANDELI MCT-520DPL PRO is a versatile 5-in-1 multi-function welding machine designed for a wide range of welding and cutting applications. It supports MIG/MAG, Flux MIG, MMA (Stick Welding), TIG, Cold Welding, and Plasma Cutting. This manual provides essential information for safe and efficient operation, setup, and maintenance of your welder.

ANDELI MCT-520DPL PRO Multi-Function Welder with included torches

Figure 1: ANDELI MCT-520DPL PRO Multi-Function Welder

Video 1: Overview of the ANDELI MCT-520DPL PRO Multi-Function Welder.

2. Safety Information

WARNING: Welding and plasma cutting can be dangerous. Always follow safety precautions to prevent injury or death.

  • Eye and Face Protection: Always wear a welding helmet with appropriate shade lenses to protect your eyes and face from arc rays and sparks.
  • Body Protection: Wear flame-resistant clothing, gloves, and safety shoes to protect against burns and electrical shock.
  • Ventilation: Ensure adequate ventilation to remove welding fumes and gases from the work area.
  • Electrical Safety: Never operate the welder in wet conditions. Ensure proper grounding and inspect cables for damage before use.
  • Fire Prevention: Keep flammable materials away from the welding area. Have a fire extinguisher readily available.
  • Gas Cylinders: Handle gas cylinders with care. Secure them properly to prevent tipping.

3. Product Overview and Features

The MCT-520DPL PRO is a multifunctional welder, made specially for aluminum welding, MIG, CUT, TIG, Cold, and MMA. This machine is suitable for welding aluminum, ordinary thin steel, iron, copper, mold repair, carbon steel, stainless steel, and more.

Key Features:

  • Precise stepless adjustment with digital display.
  • Cold welding function: no distortion, no discoloration.
  • Advanced IGBT inverter technology.
  • Good quality, high-frequency TIG torch.
  • Input Voltage: AC 220V~240V
  • Frequency: 50/60Hz
  • Efficiency: 80%~85%
  • Protection Class: IP21S
  • Insulation Class: H
  • Cooling: Fan
  • Net Weight: 14kg
ANDELI MCT-520DPL PRO Welder with dimensions and weight

Figure 2: Welder dimensions and weight (14KG, 489mm x 210mm x 327mm).

4. Setup

4.1 Unpacking

Carefully remove the welder and all accessories from the packaging. Inspect for any damage during transit. The packing list includes: 1 MIG torch, 1 TIG torch, 1 MMA torch, and 1 CUT torch.

ANDELI MCT-520DPL PRO Welder in its packaging

Figure 3: Welder as packaged.

4.2 Control Panel Introduction

Familiarize yourself with the control panel for selecting welding modes and parameters.

Detailed view of the ANDELI MCT-520DPL PRO control panel with numbered sections

Figure 4: Control Panel Layout

  1. Indicators: Wire Check, Gas Check, Storage Channel (0-9).
  2. Mode Selection: MIG (CO2/MIX/Flux Welding), CUT (Plasma Cutting), TIG (TIG Welding), Cold (Cold Welding), MMA (Stick Welding), Pulse (Pulse TIG Welding).
  3. Gas/Feature Selection: CO2, MIX (Ar+CO2 Mixed), Flux (Flux Wire Welding), VRD (Voltage Reduction Device).
  4. Wire Diameter Selection: 0.6mm / 0.024" Welding Wire, 0.8mm / 0.030" Welding Wire, 0.9mm / 0.035" Welding Wire, 1.0mm / 0.040" Welding Wire, SP (Adjust Current/Voltage Separately).
  5. Trigger Mode: 2T (Manual Mode), 4T (Semi-automatic Mode).

4.3 Welding Torch Installation

Properly connect the appropriate torch and ground clamp for your chosen welding or cutting process.

Diagrams showing torch and ground clamp connections for MIG/MAG, Flux MIG, MMA, TIG, Cold, and CUT modes

Figure 5: Welding Torch Installation Diagrams

  • MIG/MAG: Connect the MIG torch to the central connector and the ground clamp to the negative terminal.
  • FLUX MIG: Similar to MIG/MAG, ensure the correct flux-cored wire is loaded.
  • MMA: Connect the electrode holder (MMA torch) to the positive terminal and the ground clamp to the negative terminal.
  • TIG: Connect the TIG torch to the negative terminal and the ground clamp to the positive terminal.
  • COLD: Connect the Cold welding torch to the negative terminal and the ground clamp to the positive terminal.
  • CUT: Connect the Plasma cutting torch to the designated port and the ground clamp to the work piece.

5. Operating Instructions

Select the desired function on the control panel and adjust parameters according to the material and thickness.

5.1 MIG Function (CO2/MIX/Flux Welding)

The MCT-520DPL PRO can weld 0.8-10mm carbon steel in MIG mode (CO2/MIX/Flux). When using gas or gasless welding, it is necessary to replace the wiring method and use the right welding wire. Note: Use flux-cored wire for gasless welding, and ordinary carbon steel wire for gas welding.

MIG welding process on metal with sparks

Figure 6: MIG Welding in Progress

5.2 Aluminum Welding (MIG Pulse)

MIG supports pulse function, which can be used for welding 1-5mm aluminum plate in MIG mode.

Close-up of aluminum welding with a clean bead

Figure 7: Aluminum Welding

5.3 TIG Function

The TIG function is suitable for welding 0.8-8mm stainless steel, carbon steel, etc. Note: The TIG function of this machine cannot weld aluminum.

TIG welding on a metal pipe

Figure 8: TIG Welding

5.4 MMA Function (Stick Welding)

MMA is suitable for continuous welding with 3.2 electrodes.

MMA stick welding on rebar

Figure 9: MMA Welding

5.5 CUT Function (Plasma Cutting)

The CUT function is contact plasma cutting, which can quickly cut steel plates within 8mm and has a maximum cutting capacity of 12mm.

Plasma cutting through a metal plate with sparks

Figure 10: Plasma Cutting

5.6 COLD Function

TIG supports cold welding function, which is suitable for welding thin plates of 0.4-3mm stainless steel, etc. This function helps prevent distortion and discoloration of the material.

Cold welding process on a thin stainless steel plate

Figure 11: Cold Welding

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your ANDELI MCT-520DPL PRO welder.

  • Cleaning: Periodically clean the exterior of the machine and ensure ventilation openings are free from dust and debris. Use compressed air to blow out internal dust, especially from the fan and heat sinks.
  • Cable Inspection: Regularly inspect all welding cables, torches, and ground clamps for wear, cuts, or loose connections. Replace damaged components immediately.
  • Wire Feed Mechanism (MIG): Keep the wire feed rollers clean and ensure proper tension for smooth wire feeding.
  • Gas Connections: Check gas hoses and connections for leaks.
  • Storage: Store the welder in a dry, clean environment when not in use.

7. Troubleshooting

If you encounter issues with your welder, refer to the following common problems and solutions:

  • No Power: Check the power supply connection, circuit breaker, and ensure the main power switch on the welder is ON.
  • No Arc/Poor Arc: Verify proper grounding, check electrode/wire connection, ensure correct gas flow (if applicable), and confirm appropriate current/voltage settings for the material.
  • Wire Feeding Issues (MIG): Check wire spool installation, wire feed roller tension, and ensure the wire liner is not clogged or kinked.
  • Overheating: Allow the machine to cool down. Ensure adequate ventilation around the welder. Check the duty cycle for your application.
  • Plasma Cutting Issues: Check air pressure, consumable wear (electrode, nozzle), and ensure proper contact with the workpiece.

For persistent issues, contact customer support.

8. Specifications

Detailed technical specifications table for the MCT-520DPL PRO welder

Figure 12: Detailed Technical Specifications

FeatureSpecification
Material / Metal ProcessedCarbon steel, Stainless Steel, Aluminium alloy
Rated Input Voltage220V
Max. Load Power Capacity9.5KW
Output PolarityDC TIG
Rated Duty Cycle @40°C (TIG)60%
Rated Output Voltage (TIG)70V
ConditionNew
Place of OriginChina
Warranty1 Year
Key Selling PointsHigh Productivity
Weight (KG)14KG
Applicable IndustriesBuilding Material Shops, Machinery Repair Shops, Manufacturing Plant, Construction works, Other
FeatureIntegrated Display

9. User Tips

No specific user tips were available from provided reviews or Q&A. Always refer to the detailed operating instructions for best results and safety.

10. Warranty and Support

The ANDELI MCT-520DPL PRO comes with a 1-year warranty from the date of purchase.

For technical support, product training, or any inquiries, please contact us via WhatsApp:

WhatsApp: +86 19373185636

© 2024 ANDELI. All rights reserved.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.