1. Introduction
The ANDELI MIG-270DLS is a versatile 4-in-1 multi-process synergic welding machine designed for a wide range of welding applications. It supports MIG (Gas MIG, Flux MIG), LIFT TIG, and MMA (Stick) welding modes, operating on both 110V and 220V power supplies. Featuring synergic control, it simplifies parameter adjustments, making it suitable for both experienced welders and beginners. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting of your welding machine.

The image displays the front panel of the ANDELI MIG-270DLS welder, showcasing its compact design and user-friendly interface.
2. Safety Information
Always prioritize safety when operating welding equipment. Failure to follow safety precautions can result in serious injury or death. Read and understand all safety warnings before use.
- Electric Shock: Welding current can cause fatal electric shock. Ensure proper grounding, wear dry gloves, and insulate yourself from the workpiece and ground.
- Fumes and Gases: Welding fumes and gases can be hazardous to your health. Work in a well-ventilated area or use a fume extractor.
- Arc Rays: Arc rays can burn eyes and skin. Wear a welding helmet with appropriate shade, safety glasses, and protective clothing.
- Fire and Explosion: Welding can cause fire or explosion. Keep flammable materials away from the welding area. Have a fire extinguisher readily available.
- Hot Parts: Hot metal can cause severe burns. Allow welded materials to cool before handling.
- Moving Parts: Keep hands and body clear of moving parts like wire feed rollers.
3. Product Overview
3.1 Key Features
- 4-in-1 Multi-Process: Supports MIG (Gas/Flux), LIFT TIG, and MMA welding.
- Synergic Control: Simplifies parameter setting for various welding tasks.
- Dual Voltage: Operates on both 110V and 220V power supplies.
- Lightweight and Portable: Weighs approximately 10 kg for easy transport.
- Wide Material Compatibility: Capable of welding aluminum, carbon steel, stainless steel, galvanized plate, square tube, and angle steel.

This image illustrates the different welding processes supported by the MIG-270DLS: MIG (with wire feed tube), MMA (with electrode holder), and TIG (with TIG torch).
3.2 Control Panel Introduction
The control panel is designed for intuitive operation. Refer to the diagram below for an explanation of each component.

The diagram highlights the key elements of the control panel:
- Gas Checking: Button to test gas flow.
- MIG/Synergy MIG/MMA/TIG: Selector for welding process modes.
- MIG Parameter: Adjustments for CO2, MIX, or Flux welding.
- Aluminium Welding: Dedicated setting for aluminum.
- Wire Checking: Button to test wire feed.
- 2T/4T: Trigger mode selection (2-stroke or 4-stroke).
- Spot Welding: Setting for spot welding function.
- Welding Wire Diameter: Selector for wire diameter (0.6mm, 0.8mm, 0.9mm, 1.0mm).

This image shows the voltage and current adjustment knobs, emphasizing the synergic control feature for simplified settings.
4. Specifications
The following table details the technical specifications of the ANDELI MIG-270DLS welding machine.

The image presents a table with detailed electrical and physical specifications for both 110V and 220V operation.
| Parameter | 110V Input | 220V Input |
|---|---|---|
| Model | MIG-270DLS | |
| Power Supply Voltage | Single Phase 110V/220V ±15% | |
| Frequency | 60Hz | 50Hz |
| Rated Input Power (KW) - MIG | 4.2 | 5.9 |
| Rated Input Power (KW) - MMA | 4.3 | 6.0 |
| Rated Input Power (KW) - LIFT TIG | 3.1 | 4.4 |
| Rated Input Current (A) - MIG | 38.1 | 26.8 |
| Rated Input Current (A) - MMA | 38.6 | 27.7 |
| Rated Input Current (A) - LIFT TIG | 28.3 | 20.1 |
| Effective Input Current (A) - MIG | 19.7 | 10.7 |
| Effective Input Current (A) - MMA | 19.7 | 10.7 |
| Effective Input Current (A) - LIFT TIG | 14.6 | 7.0 |
| Welding Current Range (A) - MIG | 30-180 | 30-180 |
| Welding Current Range (A) - MMA | 20-120 | 20-160 |
| Welding Current Range (A) - LIFT TIG | 30-180 | 30-180 |
| No-Load Voltage (V) | 21 | 23 |
| Efficiency | 85% | |
| Power Factor | 0.93 | |
| Protection Class | IP21S | |
| Insulation Class | H | |
| Cooling | Fan | |
| Dimension (MM) | 490 x 200 x 320 | |
| Net Weight (KG) | 10 | |
| Wire Melting Type | Short Circuit Transfer | |
| Rated Duty Cycle @40°C (MIG) | 60% | |
| MIG Solid Wire Diameter | 0.8mm, 1.0mm | |
| Warranty | 2 years | |

This image provides a visual representation of the welder's dimensions (490mm x 200mm x 320mm) and its net weight (10KG).
5. Setup
5.1 Power Connection
- Ensure the welder is switched off before connecting to power.
- Connect the power cord to a suitable 110V or 220V (single phase) power outlet, ensuring the outlet can handle the rated input current.
- Verify proper grounding of the power supply.
5.2 Work Clamp Connection
- Connect the work clamp cable to the appropriate terminal on the welder (usually marked with a '-' symbol).
- Attach the work clamp securely to the workpiece, ensuring good electrical contact.
5.3 Gas Connection (for MIG with gas)
- Connect the gas hose from your shielding gas cylinder (e.g., CO2, Argon-CO2 mix) to the gas inlet on the welder.
- Ensure all connections are tight to prevent gas leaks.
- Adjust the gas flow rate using the regulator on the cylinder.
5.4 Wire Feed Setup (for MIG)
- Open the wire feed compartment and install the appropriate welding wire spool.
- Thread the wire through the drive rollers and into the MIG torch liner.
- Adjust the drive roller tension according to the wire type and diameter.
- Select the correct wire diameter on the control panel (0.6mm, 0.8mm, 0.9mm, 1.0mm).
5.5 Electrode Holder Connection (for MMA)
- Connect the electrode holder cable to the appropriate terminal on the welder (usually marked with a '+' symbol).
- Insert the welding electrode into the holder.
5.6 TIG Torch Connection (for LIFT TIG)
- Connect the TIG torch cable to the appropriate terminal on the welder.
- Ensure the tungsten electrode is correctly installed and sharpened.
- Connect the gas hose to the TIG torch if using shielding gas.
6. Operating Instructions
The MIG-270DLS offers multiple welding modes. Select the appropriate mode and adjust parameters as needed for your specific application.

This image displays examples of weld beads produced by MIG, MMA, and TIG processes, demonstrating the machine's versatility.
6.1 MIG Welding (Gas MIG / Flux MIG)
- Select 'MIG' or 'Synergy MIG' mode on the control panel.
- For Gas MIG, ensure shielding gas is connected and flowing. For Flux MIG, no external gas is required.
- Select the appropriate MIG parameter (CO2, MIX, or Flux) and wire diameter.
- Adjust voltage and wire feed speed using the synergic control knobs. The machine will suggest optimal settings.
- Choose 2T (two-stroke) or 4T (four-stroke) trigger mode as preferred.

This image illustrates the results of MIG welding using CO2, MIX gas, and Flux core wire, highlighting the different bead appearances.
6.2 MMA (Stick) Welding
- Select 'MMA' mode on the control panel.
- Insert the correct diameter electrode (supports φ2.5/3.2 welding rod) into the electrode holder.
- Adjust the welding current using the control knob.

The image demonstrates MMA welding, showing weld beads achieved with 2.5mm and 3.2mm electrodes.
6.3 LIFT TIG Welding
- Select 'TIG' mode on the control panel.
- Ensure the TIG torch is connected and the tungsten electrode is prepared.
- Adjust the welding current.
- Initiate the arc by gently touching the tungsten to the workpiece and lifting it slightly (Lift Arc ignition).

This image showcases the LIFT TIG process, emphasizing its precise adjusting, extensive use, easy operation, and stable performance, along with examples of welds on stainless steel plate and square pipe.
6.4 Aluminum Welding
- Select the 'AL' (Aluminum Welding) setting on the control panel.
- Ensure appropriate aluminum welding wire and shielding gas (typically 100% Argon) are used.
- The machine is suitable for aluminum welding with thicknesses between 2-4mm.

The image depicts the machine performing aluminum welding, indicating its capability for thicknesses ranging from 2mm to 4mm.
6.5 Material Compatibility
The MIG-270DLS is capable of welding a wide range of materials, including:
- Aluminum
- Carbon Steel
- Stainless Steel
- Galvanized Plate
- Square Tube
- Angle Steel

This image visually confirms the diverse materials that can be welded with the MIG-270DLS.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your welding machine.
- Cleaning: Periodically clean the machine's exterior and internal components (if accessible and safe) to remove dust and debris. Use compressed air for internal cleaning.
- Check Cables and Connections: Inspect all welding cables, power cords, and gas hoses for damage, fraying, or loose connections before each use. Replace damaged components immediately.
- Wire Feed System: Clean the wire feed rollers and liner regularly to prevent wire feeding issues. Ensure the correct drive rollers are used for your wire type.
- Torch Consumables: Replace MIG nozzles, contact tips, and TIG tungsten electrodes as they wear out to maintain weld quality.
- Cooling System: Ensure the cooling fan is free from obstructions and operating correctly to prevent overheating.
8. Troubleshooting
This section addresses common issues you might encounter during operation.
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to machine | Power cord unplugged, circuit breaker tripped, faulty power switch. | Check power connections, reset breaker, contact support if switch is faulty. |
| No arc / Weak arc | Poor work clamp connection, incorrect welding parameters, worn consumables, wrong process selected. | Ensure good ground, adjust current/voltage, replace contact tip/electrode, select correct mode. |
| Wire feeding issues (MIG) | Incorrect drive roller tension, clogged liner, wrong wire diameter selected, tangled wire. | Adjust tension, clean liner, select correct wire diameter, untangle wire spool. |
| Porosity in weld | Insufficient shielding gas, gas leak, contaminated workpiece, incorrect gas type. | Check gas flow/connections, clean workpiece, use correct shielding gas. |
| Overheating indicator on | Exceeded duty cycle, blocked cooling vents, high ambient temperature. | Allow machine to cool down, clear vents, work in cooler environment. |
9. User Tips
- Practice on Scrap: Before welding on your main project, always practice on scrap pieces of the same material and thickness to fine-tune your settings.
- Cleanliness is Key: Ensure your workpiece is free from rust, paint, oil, and other contaminants for the best weld quality.
- Proper Ventilation: Always weld in a well-ventilated area to avoid inhaling harmful fumes.
- Check Consumables: Regularly inspect and replace worn contact tips, nozzles, and electrodes to maintain consistent performance.
- Synergic Mode for Beginners: Utilize the synergic mode to quickly get started with optimal settings, then fine-tune manually as you gain experience.
10. Frequently Asked Questions (FAQ)
- Q1: What welding processes does the MIG-270DLS support?
- A1: The MIG-270DLS supports 4-in-1 multi-process welding, including MIG (Gas MIG, Flux MIG), LIFT TIG, and MMA (Stick) welding.
- Q2: What materials can this welder process?
- A2: It can weld a wide range of materials such as aluminum, carbon steel, stainless steel, galvanized plate, square tube, and angle steel.
- Q3: What are the power requirements for this machine?
- A3: The welder operates on a single-phase power supply and is dual voltage, supporting both 110V and 220V ±15% at 50/60Hz.
- Q4: How does the synergic control work?
- A4: Synergic control simplifies parameter setting by automatically adjusting voltage and wire feed speed based on your selection of material, wire diameter, and desired current, providing optimal welding conditions.
11. Warranty and Support
The ANDELI MIG-270DLS welding machine comes with a 2-year warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use.
For technical support, troubleshooting assistance, or warranty claims, please contact our support team:
- WhatsApp: +86 19373185636
Please have your model number (MIG-270DLS) and purchase information ready when contacting support.