Introduction
The Lemorele TC93 USB-C 10-in-1 Hub is a versatile docking station designed to expand the connectivity of your USB-C enabled devices, such as laptops and other compatible PCs. It provides a comprehensive solution for connecting multiple peripherals, external displays, network cables, and memory cards through a single USB-C port. This hub is plug-and-play, requiring no additional drivers for most operating systems, offering a convenient and efficient way to enhance your workspace.

Figure 1: Lemorele TC93 USB-C 10-in-1 Hub with connected peripherals.
Product Features
The Lemorele TC93 Hub integrates multiple functionalities into a compact design:
- 10-in-1 Connectivity: Expands a single USB-C port into 10 diverse ports.
- High-Resolution HDMI: Supports 4K@30Hz video output for external displays.
- Fast Charging: Features a 100W Power Delivery (PD) USB-C port for charging your host device.
- High-Speed Data Transfer: Includes two USB 3.0 Type-A ports (5Gbps), one USB-C Data port (5Gbps), and two USB 2.0 Type-A ports (480Mbps).
- Gigabit Ethernet: Provides a stable and fast 1000Mbps wired network connection via an RJ45 port.
- Universal Card Reader: Equipped with SD and TF card slots, supporting speeds up to 104MB/s.
- Plug and Play: No drivers required for Windows, macOS, Linux, and other compatible systems.

Figure 2: Overview of the 10-in-1 USB-C Hub ports and their capabilities.
Setup Instructions
- Connect the Hub to your Device: Plug the integrated USB-C cable of the Lemorele TC93 Hub into an available USB-C port on your laptop or compatible PC. Ensure your device's USB-C port supports DisplayPort Alternate Mode (Alt Mode) for video output and Power Delivery for charging functionality.
- Connect Power (Optional but Recommended): For stable operation, especially when connecting multiple power-hungry devices or using the HDMI output, connect your laptop's original USB-C power adapter to the 100W Power Delivery (PD) USB-C port on the hub.
- Connect External Display (HDMI): Use an HDMI cable to connect your monitor or TV to the HDMI port on the hub. Your device should automatically detect the external display. You can configure display settings (Mirror Mode or Extend Mode) through your operating system's display settings.

Figure 3: HDMI connection for external display, showing Mirror and Extend modes.
- Connect Network Cable (RJ45): For a stable wired internet connection, plug an Ethernet cable into the RJ45 Gigabit Ethernet port on the hub and connect the other end to your router or modem.

Figure 4: RJ45 Gigabit Ethernet connection for stable internet.
- Connect USB Devices: Plug your USB peripherals (e.g., keyboard, mouse, external hard drives, USB flash drives) into the available USB 3.0 Type-A, USB 2.0 Type-A, or USB-C Data ports.

Figure 5: High-speed data transfer via USB 3.0 ports.
- Insert SD/TF Cards: Insert your SD or TF (MicroSD) memory cards into the corresponding slots on the hub. Note that simultaneous reading of both SD and TF cards is not supported.

Figure 6: Expanding PC with SD & TF card slots.
Operating Instructions
Once connected, the Lemorele TC93 Hub operates automatically. Here are some key operational aspects:
- Display Output: The HDMI port supports 4K resolution at 30Hz. For optimal performance, ensure your display and HDMI cable also support 4K@30Hz. You can switch between Mirror Mode (duplicate display) and Extend Mode (extended desktop) via your computer's display settings.
- Power Delivery: The 100W PD USB-C port allows you to charge your host device while using the hub. Connect your original power adapter to this port. The hub itself will draw a small amount of power for its operation.
- Data Transfer:
- USB 3.0 Type-A & USB-C Data Ports: These ports offer data transfer speeds up to 5Gbps, ideal for external hard drives, SSDs, and high-speed flash drives.
- USB 2.0 Type-A Ports: These ports provide speeds up to 480Mbps, suitable for connecting keyboards, mice, printers, and other standard USB peripherals.
- Ethernet Connection: The RJ45 port provides a stable Gigabit Ethernet connection (1000Mbps). This is recommended for activities requiring high bandwidth and low latency, such as online gaming, large file transfers, or video conferencing.
- Card Reader: Insert SD or TF cards firmly into their respective slots. Your computer will recognize them as removable storage devices. Remember, simultaneous reading of both SD and TF cards is not supported.
Video 1: Lemorele TC93 USB-C Hub product overview and functionality demonstration.
Maintenance
Proper care and maintenance will ensure the longevity and optimal performance of your Lemorele TC93 Hub:
- Cleaning: Use a soft, dry cloth to clean the exterior of the hub. Avoid using liquid cleaners, aerosols, or harsh chemicals.
- Storage: Store the hub in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Avoid dropping the hub or subjecting it to strong impacts. Do not pull on the cable to disconnect it; always grasp the plug.
- Port Protection: When not in use, consider using dust covers for the ports to prevent dust and debris accumulation.
Troubleshooting
If you encounter issues with your Lemorele TC93 Hub, refer to the following common troubleshooting steps:
| Problem | Possible Solution |
|---|---|
| No display on external monitor via HDMI. |
|
| No internet connection via RJ45. |
|
| USB devices are not recognized or function intermittently. |
|
| SD/TF cards are not detected. |
|
| Slow data transfer speeds. |
|
Specifications
| Feature | Specification |
|---|---|
| Model Number | TC93 |
| Brand Name | Lemorele |
| Interface Type | USB Type-C |
| Ports | 10 (1x HDMI, 1x PD USB-C, 1x USB-C Data, 2x USB 3.0 Type-A, 2x USB 2.0 Type-A, 1x RJ45, 1x SD, 1x TF) |
| HDMI Output | 4K@30Hz |
| Power Delivery (PD) Port | Up to 100W |
| USB 3.0 Type-A Ports | 2 ports, 5Gbps data transfer speed |
| USB 2.0 Type-A Ports | 2 ports, 480Mbps data transfer speed |
| USB-C Data Port | 1 port, 5Gbps data transfer speed |
| RJ45 Ethernet Port | 1000Mbps Gigabit Ethernet |
| SD/TF Card Reader | 1x SD, 1x TF (MicroSD), up to 104MB/s. Does not support simultaneous reading. Supports SDHC (up to 32GB) / SDXC (up to 2TB). |
| Compatible Systems | Windows, MacOS, Linux, Others |
| Compatible PC Devices | Laptop |
| Certification | CE |
| Length (Product) | Approx. 11.7 cm (4.6 inches) |
| Width (Product) | Approx. 4.1 cm (1.6 inches) |
| Package Dimensions | 17cm (L) x 8cm (W) x 2cm (H) |
| Package Weight | 0.1 kg |

Figure 7: Physical dimensions of the Lemorele TC93 Hub.
User Tips
- For optimal video output, ensure your host device's USB-C port supports DisplayPort Alternate Mode (Alt Mode). Not all USB-C ports have this capability.
- When connecting multiple high-power devices (e.g., external hard drives, high-resolution monitors) to the hub, it is highly recommended to connect your laptop's power adapter to the hub's Power Delivery (PD) port to ensure stable power supply and performance.
- To achieve the fastest data transfer speeds, always use the USB 3.0 Type-A or USB-C Data ports for compatible devices.
- While the hub is plug-and-play, some operating systems might require a brief moment to install generic drivers upon first connection.
Warranty and Support
The Lemorele TC93 USB-C 10-in-1 Hub is designed for reliability and performance. For any technical assistance, warranty claims, or product inquiries, please contact Lemorele customer support through their official channels. Please refer to your purchase documentation for specific warranty terms and contact information.