1. Introduction
The ANDELI MCT-520DPL PRO is a versatile 5-in-1 multi-function welding machine designed for a wide range of applications. It integrates MIG, TIG, MMA, CUT, and COLD welding capabilities, making it suitable for various materials including aluminum, stainless steel, carbon steel, and iron. This manual provides essential information for the safe and efficient operation of your new welder.
Figure 1: ANDELI MCT-520DPL PRO Multi-Function Welder
2. Safety Information
Your safety is paramount. Always read and understand all safety warnings and instructions before operating the machine. This product is CE certified, ensuring it meets European safety standards.
2.1 General Safety Precautions
- Always wear appropriate personal protective equipment (PPE), including welding helmet, gloves, and protective clothing.
- Ensure adequate ventilation in the work area to avoid inhaling fumes.
- Keep children and unauthorized personnel away from the welding area.
- Do not operate the machine in wet conditions or near flammable materials.
- Regularly inspect cables and connections for damage.
2.2 VRD Anti-Leakage Protection
The MCT-520DPL PRO features a Voltage Reduction Device (VRD) anti-leakage protection function. This safety feature reduces the open-circuit voltage when the machine is idle, significantly decreasing the risk of electric shock, making it safer to use.
Video 1: Product demonstration showcasing various welding functions and safety features like VRD.
3. Product Overview
3.1 Control Panel Introduction
The control panel provides intuitive access to all welding and cutting modes and settings. Familiarize yourself with the layout before operation.
Figure 2: Detailed view of the control panel with numbered sections.
- Wire Check / Gas Check / Storage Channel (0-9): Indicators and controls for wire and gas status, and memory for saving/loading settings.
- Mode Selection: Buttons for MIG, CUT, TIG, Cold, MMA, and Pulse TIG Welding.
- Gas/Flux Type Selection: Options for CO2, MIX (Ar+CO2 Mixed), Flux (Flux Wire Welding), and VRD (Voltage Reduction Device).
- Wire Diameter / Current/Voltage Adjustment: Select wire diameter (0.6mm/0.024" to 1.0mm/0.040") and adjust current/voltage separately.
- Trigger Mode: 2T (Manual Mode) and 4T (Semi-automatic Mode).
3.2 Included Accessories
The MCT-520DPL PRO comes with the following accessories:
- Ground Clamp
- Alu. Welding Torch (3M)
- MIG Torch
- CUT Torch (PT-31)
- TIG Torch (WP-9F)
- Gas Pipe (3M)
- Air Pressure Regulator
- Hose Clamp (x2)
- Tungsten Electrode (x10)
- Tip (x10)
- Electrode (x10)
- Nozzle Shield (x4)
- Nozzle (x20)
- Nozzle (x10)
- Flux-cored Wire
- Stainless Steel Wire
Figure 3: Visual representation of the accessories included with the welder.
4. Setup and Installation
Proper installation of welding torches and accessories is crucial for safe and effective operation. Refer to the diagram below for correct connections.
Figure 4: Welding Torch Installation for MIG/MAG, Flux MIG, MMA, TIG, COLD, and CUT modes.
WARNING: PLEASE DO NOT CONNECT POLARITY SWITCHES WHEN USING MMA/TIG/CUT MODES, OTHERWISE THE MACHINE WILL BE DAMAGED.
4.1 Connecting the Ground Clamp
Connect the ground clamp cable to the appropriate terminal on the front panel of the welder. Securely attach the ground clamp to the workpiece, ensuring good electrical contact.
4.2 Torch Installation by Mode
- MIG/MAG & Flux MIG: Connect the MIG torch and gas line (if using gas) as shown in the diagram. Ensure the wire feed mechanism is correctly loaded with the appropriate welding wire.
- MMA: Connect the electrode holder and ground clamp as depicted.
- TIG: Connect the TIG torch and gas line. Ensure the tungsten electrode is correctly installed.
- COLD: Connect the COLD welding torch and ensure pure argon gas is supplied.
- CUT: Connect the plasma cutting torch and air supply.
5. Operating Modes
The MCT-520DPL PRO offers multiple welding and cutting functions. Select the desired mode using the control panel buttons.
5.1 MIG Function (CO2/MIX/FLUX)
The MIG function is suitable for welding 0.8-10mm carbon steel. For gas welding, use ordinary carbon steel wire with CO2 or Ar+CO2 mixed gas. For gasless welding, use flux-cored wire.
Figure 5: MIG welding in progress.
5.2 MIG Pulse Function (Aluminum Welding)
This mode supports pulse function, making it ideal for welding 1-5mm aluminum plates. The pulse feature provides better control and results for aluminum welding.
Figure 6: MIG pulse welding on aluminum.
5.3 TIG Function (HF)
The TIG function is suitable for welding 0.8-8mm stainless steel and carbon steel. Note: The TIG function of this machine cannot weld aluminum.
Figure 7: TIG welding application.
5.4 COLD Function
The COLD welding function is designed for welding thin plates of 0.4-3mm stainless steel and other thin materials. It operates at a relatively low temperature, preventing deformation and discoloration, resulting in high aesthetic welds. This mode requires pure argon gas.
Figure 8: COLD welding process.
5.5 MMA Function
The MMA (Manual Metal Arc) function is suitable for continuous welding with 3.2 electrodes.
Figure 9: MMA welding in action.
5.6 CUT Function
The CUT function provides contact plasma cutting capabilities. It can quickly cut steel plates within 8mm thickness, with a maximum cutting capacity of 12mm.
Figure 10: Plasma cutting operation.
6. Specifications
Below are the detailed technical specifications for the ANDELI MCT-520DPL PRO Multi-Function Welder:
| Feature | Specification |
|---|---|
| Type | Hand Tool Parts / Portable |
| Material / Metal Processed | Carbon Steel, Stainless Steel, Aluminium alloy |
| Rated Input Voltage | AC 220-240 V |
| Frequency | 50/60 Hz |
| Max. Load Power Capacity | 6-9.5 KW |
| Output Polarity | DC TIG |
| Rated Duty Cycle @40°C (TIG) | 85% |
| Rated Output Voltage | 268 V |
| Welding Current/Voltage Range | 220V |
| Pulse Frequency | 50/60 |
| Rated Output Current | 200 A |
| Welding Thickness | 5mm (General) / 0.4-10mm (TIG) |
| Efficiency | 80-85% |
| Power Factor | 0.73-0.76 |
| No-Load Voltage | 62 V (MIG/COLD/MMA), 62-268 V (TIG), 268 V (CUT) |
| Cold Welding Time (MS) | 1-200 |
| Cold Welding Interval (Hz) | 0-10 |
| Pre-Flow Time (S) | 0-1 (COLD/TIG) |
| TIG Duty Cycle (30%) | 50-200A |
| TIG Duty Cycle (60%) | 35-143A |
| TIG Duty Cycle (100%) | 27-111A |
| Insulation Class | H |
| Protection Class | IP21S |
| Cooling | Fan |
| Dimension (MM) | 489 x 210 x 327 |
| Net Weight | 14 kg |
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your welding machine.
- Cleaning: Periodically clean the machine's exterior and ventilation openings to prevent dust and debris buildup. Use compressed air to clear internal components if necessary, ensuring the machine is unplugged.
- Cable Inspection: Regularly check all cables, torches, and connections for wear, cuts, or damage. Replace any damaged parts immediately.
- Consumables: Inspect and replace consumables (e.g., welding tips, electrodes, nozzles) as they wear out to maintain weld quality.
- Storage: Store the machine in a dry, clean environment, away from excessive dust and moisture.
8. Troubleshooting
This section covers common issues and their potential solutions. For complex problems, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable disconnected, circuit breaker tripped | Check power connections, reset circuit breaker |
| Poor weld quality | Incorrect settings, worn consumables, improper gas flow | Adjust current/voltage, replace tips/nozzles, check gas supply |
| Machine overheats | Blocked ventilation, exceeding duty cycle | Clear vents, allow machine to cool down, operate within duty cycle |
| Wire feed issues (MIG) | Tangled wire, incorrect tension, clogged liner | Untangle wire, adjust tension, clean/replace liner |
9. User Tips
No specific user tips were available from reviews or Q&A for this product at this time. However, general best practices for multi-process welders include:
- Always perform test welds on scrap material to fine-tune settings before working on your main project.
- Keep your work area clean and organized to prevent accidents and improve efficiency.
- For COLD welding, ensure you are using pure argon gas to achieve the desired aesthetic results without deformation or discoloration.
- When switching between welding processes, double-check all connections and settings to match the selected mode.
10. Warranty and Support
The ANDELI MCT-520DPL PRO comes with a two-year warranty. In case of any issues or if you require free guidance, please contact our efficient customer service team. We provide returns and exchanges within 30 days after receiving the goods, and free replacement parts during the warranty period.
For support, you can contact us via WhatsApp: +86 19373185636.