eOQO G28 Retro Handheld Game Console Instruction Manual

1. Introduction

The eOQO G28 is a versatile retro handheld game console designed for enthusiasts of classic gaming. Featuring a 4.3-inch HD screen and powered by an Emuelec 4.7 Linux-based operating system, it supports a wide array of classic simulators and comes pre-loaded with thousands of games. Its ergonomic design, responsive 3D joystick, and High Definition Multimedia Interface output make it an ideal portable and home gaming solution.

2. Features

• High Definition Multimedia Interface Output: Connect directly to a TV or other High Definition Multimedia Interface-compatible display for a larger gaming experience.
• Dual USB-C Ports: Supports simultaneous external handle connection and charging.
• 4.3-inch HD Screen: Enjoy smoother gameplay with an upgraded high-definition display (480x272 resolution, IPS type).
• Original 3D Joystick: Arcade-specific game joystick with high sensitivity and anti-skid design for precise control.
• Open Source Linux System (Emuelec 4.7): Supports up to 25 classic simulators, allowing you to play a vast library of nostalgic games including PSP, PS1, and N64 titles.
• Colorful LED Indicators: Dual remote sensing colorful LED indicators with 7 freely switchable colors.

3. Specifications

4. Package Contents

Upon opening your eOQO G28 package, you should find the following items:

• 1 x eOQO G28 Game Console
• 1 x USB-C Charging Cable

5. Setup

5.1 Initial Charging

1. Connect the provided USB-C charging cable to the console's USB-C port.
2. Plug the other end of the cable into a 5V 2A power adapter (not included) or a compatible USB power source.
3. Allow the console to charge fully before first use. The LED indicator may show charging status.

5.2 Inserting a TF Card (Optional)

The console supports up to 256GB of external storage via a TF card (MicroSD card) for additional games. The TF card slot is located on the top edge of the console.

1. Locate the TF card slot on the top of the console.
2. Gently insert the TF card into the slot until it clicks into place. Ensure the card is oriented correctly.
3. To remove, push the card in slightly until it springs out.

5.3 Connecting to a TV (High Definition Multimedia Interface Out)

The G28 console features a High Definition Multimedia Interface output for connecting to external displays.

1. Ensure the console is powered off.
2. Connect a High Definition Multimedia Interface cable (not included) from the console's High Definition Multimedia Interface OUT port to an available High Definition Multimedia Interface input on your TV or monitor.
3. Power on the console and select the corresponding High Definition Multimedia Interface input on your TV.

5.4 Connecting External Handles (Optional)

The dual USB-C ports allow for connecting external game controllers.

1. Connect your compatible external game handle(s) to the USB-C ports on the console.
2. The system should automatically detect the connected handles. Refer to the game's settings for controller configuration if needed.

6. Operating Instructions

6.1 Power On/Off

• Power On: Press and hold the Power button (usually labeled ON/OFF) located on the top edge of the console until the screen illuminates.
• Power Off: Press and hold the Power button until a power-off menu appears, then select 'Shutdown' or 'Power Off'. Alternatively, a quick press might put it into sleep mode.

6.2 Navigating the System

The G28 runs on an Emuelec 4.7 Linux-based system. Use the D-pad and 3D joysticks to navigate through menus and game lists.

• D-pad/Left Joystick: Move cursor up, down, left, or right.
• A Button: Confirm selection.
• B Button: Go back or cancel.
• Start/Select Buttons: Typically used for in-game functions or system menu access.

6.3 Selecting and Playing Games

1. From the main menu, navigate to the desired emulator (e.g., PSP, PS1, N64).
2. Select the emulator to view the list of available games.
3. Choose a game from the list and press the A button to launch it.
4. Follow on-screen prompts or in-game instructions to play.

6.4 Adjusting LED Indicators

The console features dual remote sensing colorful LED indicators. The method for switching colors may vary, but typically involves a dedicated button or a combination of buttons. Refer to the system settings for customization options if available.

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the console's exterior. Avoid using liquid cleaners or abrasive materials.
• Screen Care: Use a microfiber cloth specifically designed for electronics to clean the screen. Do not press hard on the screen.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Store the console with a partial charge if not used for extended periods.
• Storage: Store the console in a cool, dry place away from direct sunlight, extreme temperatures, and humidity.
• Software Updates: Periodically check for system updates to ensure optimal performance and compatibility. Refer to the Emuelec community or manufacturer's website for update instructions.

8. Troubleshooting

• Console does not power on: Ensure the battery is charged. Connect the console to a power source and try again. If the issue persists, try a different charging cable or adapter.
• Screen is blank or flickering: Restart the console. If connected to a TV, ensure the High Definition Multimedia Interface cable is securely connected and the correct input is selected on the TV.
• Games are not loading or crashing: Ensure the TF card is properly inserted. Some games may require specific emulator settings; consult online resources for Emuelec or the specific game.
• Controls are unresponsive: Check if external controllers are properly connected. If using built-in controls, try restarting the console.
• No sound: Check the volume settings on the console and any connected external display/audio system. Ensure headphones are properly plugged in if used.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your proof of purchase for any warranty claims.