MEKEDE 4470A

Contents

MEKEDE 4470A Car DSP Box Power Amplifier User Manual

Model: 4470A | Brand: MEKEDE

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your MEKEDE 4470A Car DSP Box Power Amplifier. Please read this manual thoroughly before using the product to ensure proper function and to maximize your audio experience. The MEKEDE 4470A is designed to be compatible with most Android radios, enhancing your in-car audio system.

MEKEDE 4470A Car DSP Amplifier with 4*80W output and APP EQ adjustment

Figure 1: MEKEDE 4470A Car DSP Box Power Amplifier

Specifications

The MEKEDE 4470A is a compact and powerful DSP amplifier designed to enhance your car's audio system. Key specifications are listed below:

Product size and specifications table for MEKEDE 4470A DSP amplifier

Figure 2: Product Dimensions and Key Specifications

FeatureSpecification
Output Power4*80W
Signal To Noise Ratio>70dB
Standard Distortion0.1%
Standby Current5mA
Voltage Range9-16V
Maximum Working Current25A
Item Size (L*W*H)138*115*38 mm
Item Weight0.7kg
Special FeaturesDSP/MP3/PCA/USB/APP
Audio EncodingStereo
CertificationCE, FCC
OriginMainland China

Note: There is a slight discrepancy in item weight between some visual representations (0.98kg) and the product properties (0.7kg). The JSON property value of 0.7kg is used here.

Setup and Installation

Before installation, ensure your vehicle's power is off. Professional installation is recommended to ensure correct wiring and optimal performance.

1. Choosing an Installation Location

The compact design of the MEKEDE 4470A allows for flexible installation within your vehicle. Common recommended locations include:

  • Under the passenger seat
  • Inside the passenger compartment (e.g., glove box or console)
Diagram showing recommended installation locations: under passenger seat and in passenger compartment

Figure 3: Recommended Installation Locations

2. Interface Diagram and Connections

Familiarize yourself with the amplifier's interfaces before making any connections. Refer to the diagram below for port identification:

Detailed interface diagram of the MEKEDE 4470A DSP amplifier with labeled ports

Figure 4: Amplifier Interface Diagram

  1. OPTICAL (A): Supports optical fiber input for high-quality digital audio.
  2. RCA OUT (B, D): Red (B) for right channel audio output, White (D) for left channel audio output.
  3. COAXIAL (C): Supports coaxial input for digital audio sources.
  4. CAR MEDIA (E): Power interface for integration with the car's media system.
  5. DSP APP (F): Connection port for the vehicle's central control host or a mobile phone to perform DSP debugging and adjustments.
  6. AUX IN (G): Auxiliary input for connecting external analog audio devices.
  7. USB (H): USB Music input for playing audio files directly from a U disk.
  8. POWER IN (I): Main power input interface for the amplifier.

Ensure all connections are secure and correctly matched according to your vehicle's wiring diagram to prevent damage to the amplifier or the vehicle's audio system.

Operating Instructions

1. DSP Equalizer Adjustments

The MEKEDE 4470A features advanced DSP (Digital Signal Processor) capabilities, allowing for precise audio tuning and customization. You can adjust settings using a dedicated mobile phone app or a computer.

  • Tuning Methods: Supports a variety of device tuning methods, including mobile phone app tuning and computer tuning.
  • Advanced Functions: Utilize features such as delay adjustment, mono adjustment, mixing, and other advanced tuning functions to optimize your sound quality.
DSP Equalizer Adjustments interface showing tuning options and a comparison of sound quality before and after DSP

Figure 5: DSP Equalizer Adjustments and Sound Quality Improvement

The DSP significantly improves sound quality, transforming previously noisy and unclear audio into a considerably enhanced and clearer listening experience.

2. Audio Input Options

The amplifier supports multiple audio input sources to cater to various preferences:

  • USB Music: Insert a U disk (USB flash drive) into the USB port (H) to play decoded music directly through the DSP power amplifier.
  • AUX Input: Connect external analog audio devices such as mobile phones or portable audio players to the AUX IN port (G) for improved sound quality after DSP processing.
  • Optical Fiber Input: Utilize the OPTICAL IN port (A) for high-fidelity digital audio input from compatible sources.
  • Coaxial Input: Use the COAXIAL IN port (C) for digital audio input from compatible sources.
Images illustrating USB Music input and AUX Input functionality

Figure 6: USB Music and AUX Input Features

3. Sound Field Positioning

The DSP amplifier allows for precise sound field positioning by controlling the timing of sound played by each car speaker. This advanced feature creates a surround sound effect, significantly enhancing the stereo feeling and providing an immersive, concert-hall like auditory experience within your vehicle.

Comparison diagram of sound positioning without DSP vs. with DSP, showing improved stereo imaging

Figure 7: Sound Field Positioning Comparison (Without DSP vs. With DSP)

Without DSP, speakers may produce sound simultaneously, leading to a less defined or disordered sound field. With DSP, the sound can be precisely timed to reach the designated listening position, significantly enhancing the stereo imaging and overall audio clarity.

Maintenance

To ensure the longevity and optimal performance of your MEKEDE 4470A DSP amplifier, follow these general maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to gently wipe the exterior of the amplifier. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the finish.
  • Environment: Keep the amplifier in a dry environment, away from excessive moisture, direct sunlight, dust, and extreme temperatures.
  • Ventilation: Ensure the amplifier's heat sinks and ventilation openings are not obstructed. Proper airflow is crucial to prevent overheating and maintain stable operation.
  • Connections: Periodically check all power and audio connections to ensure they remain secure and free from corrosion. Loose connections can lead to poor sound quality or intermittent operation.

Troubleshooting

If you encounter issues with your MEKEDE 4470A DSP amplifier, refer to the following common problems and their potential solutions:

ProblemPossible CauseSolution
No Sound Output
  • Power cable disconnected or fuse blown
  • Incorrect audio input selected on the amplifier or head unit
  • Speaker wires loose, disconnected, or incorrectly connected
  • DSP settings muted or volume set too low
  • Check all power connections to the amplifier and verify the fuse.
  • Ensure the correct input source (USB, AUX, Optical, Coaxial) is active.
  • Inspect all speaker wire connections for proper polarity and secure fit.
  • Check the DSP app/software for mute status or low volume settings.
Distorted Sound / Noise
  • Poor quality audio source
  • Improper DSP equalizer settings (e.g., excessive boost)
  • Loose or damaged audio cables (RCA, optical, coaxial)
  • Ground loop interference
  • Test with a different, known good audio source.
  • Reset DSP equalizer settings to default or adjust gains and EQ bands carefully.
  • Ensure all audio cables are securely connected and undamaged.
  • Check for proper grounding of the amplifier and head unit to eliminate ground loops.
Amplifier Overheating
  • Insufficient ventilation around the amplifier
  • Improper speaker impedance load (too low)
  • Prolonged operation at very high volume levels
  • Ensure adequate airflow around the amplifier's heat sinks. Relocate if necessary.
  • Verify that the speaker impedance matches the amplifier's specifications.
  • Reduce volume or allow the amplifier to cool down.
APP/Software Connection Issues
  • Bluetooth pairing failure or USB connection issue
  • Outdated DSP control app/software
  • Interference from other wireless devices
  • Ensure Bluetooth is enabled on your device and the amplifier is in pairing mode, or that the USB cable is securely connected.
  • Update the DSP control app or software to the latest version.
  • Try disconnecting other Bluetooth devices temporarily.

User Tips

  • Start with Default DSP Settings: When first setting up your amplifier, it's often best to begin with the default DSP settings. Make small, incremental adjustments to the equalizer, delay, and other parameters to gradually find your preferred sound profile.
  • Experiment with Sound Field Positioning: Take full advantage of the sound field positioning feature. Adjusting the timing and delay for individual speakers can create a truly immersive listening experience tailored to your vehicle's unique interior acoustics.
  • Utilize High-Quality Audio Sources: For the best possible sound quality, use high-resolution audio files via the USB input or digital inputs (optical/coaxial) whenever available. The DSP amplifier will process these signals to their full potential.
  • Regular Software Updates: Keep your DSP control app or computer software updated to the latest version. Updates often include new features, performance improvements, and bug fixes that can enhance your experience.
  • Professional Installation for Best Results: While DIY installation is possible, professional installation ensures optimal wiring, grounding, and initial setup, which can significantly impact sound quality and system stability.

Warranty and Support

Your MEKEDE 4470A Car DSP Box Power Amplifier comes with a 365-day free replacement warranty. This warranty covers manufacturing defects and quality problems that arise under normal use conditions.

Warranty terms and conditions for 365 days free replacement

Figure 8: 365 Days Free Replacement Warranty Process

The typical process for a free replacement under warranty involves the following steps:

  1. Contact the Seller: Initiate contact with the MEKEDEAUTO Europe Store through your purchase platform to report the issue.
  2. Confirm Quality Problems: Work with the seller to confirm the nature of the quality problem or manufacturing defect.
  3. Return Item to Seller: Once confirmed, you will be instructed to return the defective item to the seller.
  4. Seller Receives Return: The seller will process the returned item upon receipt.
  5. Seller Sends New Item: A new replacement item will be dispatched to you.

For any support inquiries, technical assistance, or to initiate a warranty claim, please contact the MEKEDEAUTO Europe Store directly through the platform where you made your purchase. Please have your order details ready when contacting support.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.