Introduction
Thank you for choosing the ZEALOT PT02 60W Portable Bluetooth Speaker. This manual provides essential information for the proper setup, operation, and maintenance of your device. Please read it carefully before use to ensure optimal performance and longevity.
Video: ZEALOT-PT02 Bluetooth Speaker Features Overview
Package Contents
Please check the box for the following items:
- 1x ZEALOT PT02 Bluetooth Speaker
- 1x Charging Cable (Type-C)
- 1x User Manual
- 1x Audio Cable
- 1x Straps
Image: ZEALOT PT02 Package Contents
Specifications
| Feature | Detail |
|---|---|
| Model | PT02 |
| Wireless Version | 5.4 |
| Speaker Output | 60W |
| Transmission Distance | 10m |
| Frequency Response | 20Hz-20KHz |
| Signal-to-Noise Ratio (SNR) | >96dB |
| Distortion | ≤1% |
| Battery Capacity | 8000mAh |
| Charging Voltage | DC 5V |
| Working Voltage | 7.4V |
| Charging Interface | Type-C |
| Charging Time | 3.5 hours |
| Standby Time | ≥ 30 days |
| Waterproof Rating | IPX6 |
| Dimensions (L x W x H) | 166 x 122 x 226 mm |
| Weight | 2.34 kg |
| Input/Output | AUX |
| Sound Mode | 3D Surround Sound Mode |
| Tweeter Type | HORN |
| Sensitivity | 85dB |
| Active Noise-Cancellation | PASSIVE |
| Voice Control | No |
| Support APP | No |
| Material | Plastic |
| Playback Function | MP3 |
| Built-in Microphone | Yes |
| Audio Crossover | Full-Range |
| Number of Loudspeaker Enclosure | 1 |
| Power Source | Battery |
| Remote Control | No |
| Support Memory Card | Yes (TF Card) |
| Certification | CE |
Image: Product Dimensions
Setup
1. Initial Charge
For the first use, it is recommended to fully charge the speaker. Connect the provided Type-C charging cable to the speaker's charging port and a compatible DC 5V power adapter (not included). The battery indicator light will show charging status:
- Green light is on: 80%-100% battery
- Yellow light is on: 40%-70% battery
- Red light is on: ≤ 30% battery
A full charge typically takes 3.5 hours. If using a power adapter, ensure it is CCC certified and meets standard requirements. The power delivered by the charger must be between min 7.5 Watts and max 15 Watts to achieve maximum charging speed.
Image: 8000mAh Large Battery for Extended Use
2. Power On/Off
Locate the power button on the speaker. Press and hold to turn the speaker ON or OFF.
3. Bluetooth Pairing
- Turn on the ZEALOT PT02 speaker.
- Enable Bluetooth on your device (smartphone, tablet, etc.).
- Search for "ZEALOT-PT02" in your device's Bluetooth settings and select it to connect.
- You will hear a prompt tone indicating a successful connection.
The speaker uses Bluetooth version 5.4 for stable connections up to 10 meters.
Image: Upgraded Bluetooth 5.4 for Stronger Performance
4. Multi-Unit Interconnection (PartyAdd)
To create a wider sound field with multiple speakers:
- Turn on the first speaker and connect it to your device via Bluetooth.
- Click the dual pairing button on the first speaker. You will hear a prompt tone.
- Turn on the second speaker and click its dual pairing button. A prompt tone will indicate successful connection to the first speaker.
- Repeat step 3 for additional speakers (third, fourth, up to N speakers). All connected speakers will play music simultaneously, creating a cinema-quality surround sound experience.
Image: Multiple Devices Connected for Enhanced Sound
Operating Your Speaker
1. Basic Controls
The speaker features intuitive buttons for various functions:
- ON/OFF: Press and hold to power the speaker on or off.
- PLAY/PAUSE: Press to play or pause music.
- Volume Up/Down: Press '+' or '-' buttons to adjust volume.
- Next/Previous Track: Long press '+' or '-' buttons to skip tracks.
- Mode Switch: Press the 'M' button to cycle through input modes (Bluetooth, TF Card, AUX).
- Light Switch: Press the light button to change RGB lighting effects (Flashing, Lighting, Off).
- Equalizer (EQ): Press the EQ button to switch between sound modes:
- Bass: Green light is on.
- Vocal: Orange light is on.
- Normal: No specific light indication.
Image: ZEALOT PT02 Speaker with RGB Lighting
2. TF Card Playback
Insert a TF card (microSD card) with MP3 formatted music into the designated slot. The speaker will automatically switch to TF card mode and begin playback. Ensure the card is formatted to FAT32 for proper recognition.
3. AUX Input
Connect an external audio device using the provided audio cable to the AUX input port. The speaker will switch to AUX mode, allowing you to play audio from your connected device.
Maintenance and Care
- Cleaning: Do not use organic solvents or other harsh chemicals to clean the product. Use a soft, dry cloth to wipe the surface.
- Storage: Store the product at room temperature. Avoid extreme temperatures, direct sunlight, and high humidity.
- Protection: Do not expose the product to fire or high temperatures. Avoid dropping or throwing the product to prevent damage.
- Foreign Objects: Do not allow small particles or foreign objects to enter the speaker.
- Disassembly: Do not disassemble the product or make any modifications to its structure or any part thereof. Unauthorized modifications can void the warranty and cause damage.
- Battery: If the battery needs replacement, ensure it is replaced with the same type to avoid explosion hazards. The battery should not be exposed to direct sunlight, fire, or similar overheating conditions.
Troubleshooting
If you encounter any issues with your ZEALOT PT02 speaker, please refer to the following common problems and solutions:
- Q: The speaker cannot be turned on.
- A: Ensure the speaker is sufficiently charged. For first use, fully charge the speaker before attempting to power it on.
- Q: The battery is not charging.
- A: Sometimes, due to low temperature or other conditions, the battery may enter a dormant state. Try charging continuously for at least 1 hour; the charging status should then return to normal.
- Q: No sound output when playing music.
- A: This is often a music formatting issue. Please ensure your music files are in MP3 format.
- Q: Unable to connect or pair via Bluetooth.
- A: Disconnect any other Bluetooth devices from your phone/device first, then search for "ZEALOT-PT02" and attempt to connect again.
- Q: No sound after Bluetooth connection.
- A: Check if both the speaker volume and your phone's volume are turned up. Also, ensure that music is actively playing on your phone.
- Q: Cannot adjust the volume.
- A: Verify that neither the speaker's volume nor your phone's volume is already at its maximum or minimum limit. If both are at maximum, further adjustment may not be possible.
- Q: My SD card is not recognized.
- A: Ensure the storage card is formatted to FAT32 and the music files are in MP3 format for proper recognition.
- Q: How to connect to a TV?
- A: The speaker can typically be connected to a TV using an AUX data cable.
- Q: How does the standalone working mode function?
- A: The speaker will generally maintain the mode you select (e.g., MP3 mode) as long as it functions correctly. If it cannot continuously read music in a specific mode, it will automatically switch to a mode that can be used normally.
User Tips
- Always fully charge your speaker before its first use to optimize battery life.
- Keep the speaker volume at a moderate level to protect your hearing and enjoy clear audio.
- For best compatibility, ensure your music files are in MP3 format and any memory cards are formatted to FAT32.
- If experiencing Bluetooth connection issues, temporarily disable Bluetooth on other nearby devices to prevent interference.
- Utilize the multi-unit interconnection feature to create an immersive stereo or surround sound experience for parties or larger spaces.
Warranty and Support
For detailed warranty information and customer support, please refer to the official ZEALOT website or contact your retailer.
A comprehensive user manual in PDF format is available for download. You can access it via the following link or by scanning the QR code provided in the physical manual:
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Brand Introduction
Zealot Digital Technology Co., Ltd., established in August 2010, is a high-tech enterprise committed to the field of digital products, integrating R&D, production, sales, and service. The company focuses on market demand, innovation, and public quality of life. Its products are recognized in the digital audio-visual market for advanced technology, quality, fashionable appearance, and considerate after-sales service.
