HOMCOM 820-301V90BK

Contents

HOMCOM Electric Fireplace User Manual

Model: 820-301V90BK

Brand: HOMCOM

1. Introduction

Thank you for choosing the HOMCOM Electric Fireplace. This electric tabletop fireplace is designed to provide warmth and a cozy ambiance to your space with its realistic LED flame effect and adjustable heat settings. Its compact and portable design makes it suitable for various rooms in your home, such as the bedroom, living room, or office. Please read this manual thoroughly before use to ensure safe and efficient operation.

Front view of the HOMCOM Electric Fireplace, showcasing its design and realistic flame effect.
Front view of the HOMCOM Electric Fireplace, showcasing its design and realistic flame effect.

2. Important Safety Instructions

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

  • Read all instructions before using this heater.
  • This fireplace is equipped with an overheat protection device. If the heater overheats, it will automatically shut off. If this occurs, unplug the heater and wait 10 minutes before plugging it back in.
  • The unit features tempered glass, designed to keep the surface cool and prevent burns.
  • DO NOT COVER the fireplace or block the air vents. This can lead to overheating and fire.
  • Do not use this heater in bathrooms, laundry areas, or similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.
  • Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
  • Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
  • Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
Safety features of the fireplace, highlighting overheat protection (automatic shutdown) and tempered glass that keeps the surface cool to prevent burns.
Safety features of the fireplace: Overheat protection (automatic shutdown) and tempered glass to prevent burns.

3. Package Contents

Please check the package contents carefully. If any items are missing or damaged, contact your retailer for assistance.

  • HOMCOM Electric Fireplace Unit
  • Instruction Manual
  • Assembly Hardware (if applicable)

4. Specifications

FeatureDetail
Model820-301V90BK
ColorBlack
MaterialSteel, Tempered Glass, ABS
Overall Dimensions (LxWxH)40.5 cm x 20 cm x 62 cm
Glass Panel Dimensions (Front)39.5 cm x 36 cm
Glass Panel Dimensions (Side)12 cm x 36 cm
Power Settings1000W / 2000W
Coverage Area15-20 m²
Input Voltage/Frequency220-240V / 50Hz
Cable Length1.5 m
Noise LevelLess than 55 dB
CertificationsCE (EMC, LVD, ROHS, ERP)
Diagram illustrating the dimensions of the electric fireplace: 40.5 cm (width), 20 cm (depth), and 62 cm (height).
Dimensions of the electric fireplace.
Technical specifications of the fireplace, including coverage area (15-20 m²), voltage/frequency (220-240V/50Hz), power (1000W/2000W), and noise level (55 dB).
Technical specifications: Coverage area, voltage, power, and noise level.

5. Assembly

This product requires assembly. Please refer to the included assembly instructions and diagrams for detailed steps. Ensure all parts are present and undamaged before beginning assembly. It is recommended to assemble the unit on a soft, clean surface to prevent scratches.

6. Operation

6.1 Powering On/Off

  • Plug the fireplace into a suitable 220-240V/50Hz wall outlet.
  • Locate the main power switch (usually on the unit's control panel) and turn it to the 'ON' position.

6.2 Heat Settings

The fireplace offers two heat settings:

  • 1000W: For moderate heating.
  • 2000W: For maximum heating output in larger areas (up to 15-20 m²).

Use the control buttons or knobs on the unit to select your desired heat level. The stepless thermostat control allows you to fine-tune the temperature to your comfort.

6.3 Flame Effect

The realistic LED flame effect can be operated independently of the heating function, allowing you to enjoy the ambiance without heat. The flame brightness is adjustable in 4 positions to suit your preference.

Illustration of the fireplace's 3-sided transparent design, offering a 180-degree view of the flame effect.
The 3-sided transparent design provides a 180-degree view of the flame effect.
Detail showing the realistic LED flame effect, which can be used independently of the heating function, and its 4-position adjustable brightness.
Realistic LED flame effect with 4-position adjustable brightness, usable independently of heat.

7. Maintenance

To ensure the longevity and optimal performance of your electric fireplace, follow these maintenance guidelines:

  • Always unplug the appliance from the power outlet and allow it to cool completely before cleaning.
  • Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Gently clean the glass panels with a glass cleaner and a soft cloth.
  • Ensure that the air intake and exhaust vents are free from dust and debris. You may use a vacuum cleaner with a brush attachment to clean these areas.
  • Store the fireplace in a cool, dry place when not in use for extended periods.

8. Troubleshooting

If you encounter any issues with your electric fireplace, please refer to the following common problems and solutions:

  • No Power: Ensure the power cord is securely plugged into a working outlet and the main power switch is ON. Check your household circuit breaker.
  • Heater Not Working (Flame Effect Works): The overheat protection may have been activated. Unplug the unit, wait 10 minutes, and plug it back in. Ensure vents are not blocked.
  • Flame Effect Not Working: Check if the flame effect switch is turned on. If the heater is working but the flame is not, there might be an issue with the LED component.
  • Unusual Noise: A slight fan noise is normal during heating operation. If the noise is excessive or unusual, unplug the unit and contact customer support.

If the problem persists after trying these steps, please contact customer support.

9. User Tips

No specific user tips are available from customer reviews or Q&A for this product at this time. However, general tips for electric fireplaces include:

  • Place the fireplace in a central location within the desired heating area for optimal heat distribution.
  • Utilize the flame-only mode for ambiance during warmer months or when additional heat is not required.
  • Keep the area around the fireplace clear of curtains, furniture, and other flammable materials.

10. Warranty and Support

For warranty information, please refer to the terms and conditions provided by your retailer at the time of purchase. If you require technical support or have questions not covered in this manual, please contact the HOMCOM customer service department or your authorized dealer.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.