ANDELI MIG 250

Contents

ANDELI MIG 250 Multi-Process Welding Machine User Manual

Model: MIG 250

Brand: ANDELI

1. Introduction

The ANDELI MIG 250 is a versatile, multi-functional welding machine designed for various welding applications. It supports MIG (Flux-cored), Lift TIG, and MMA (Stick) welding processes, making it suitable for both hobbyists and professionals in building material shops, machinery repair shops, and manufacturing plants. This manual provides essential information for the safe and effective operation and maintenance of your welding machine.

ANDELI MIG 250 Multi-functional Welding Machine showing MIG, Lift TIG, and MMA welding examples.

Figure 1: Multi-functional capabilities of the ANDELI MIG 250.

2. Safety Information

Always prioritize safety when operating welding equipment. Failure to follow safety precautions can result in serious injury or death.

  • Electric Shock: Welding current can kill. Do not touch live electrical parts. Wear dry, insulating gloves and protective clothing. Ensure the work area is dry.
  • Fumes and Gases: Welding fumes and gases can be hazardous to your health. Keep your head out of the fumes. Use ventilation or exhaust to remove fumes and gases from the breathing zone and general area.
  • Arc Rays: Arc rays can burn eyes and skin. Wear a welding helmet with a proper shade filter to protect your eyes and face. Wear appropriate protective clothing to protect your skin.
  • Fire and Explosion: Welding can cause fire or explosion. Keep flammable materials away from the welding area. Have a fire extinguisher readily available.
  • Hot Parts: Hot metal can cause severe burns. Allow welding equipment and materials to cool before handling.
  • Pacemakers: Magnetic fields from high currents can affect pacemakers. Consult your doctor before operating welding equipment.

3. Package Contents

Upon unpacking, please verify that all items listed below are included and in good condition:

  • ANDELI MIG 250 Welding Machine
  • Ground Clamp (2 meters)
  • MIG Torch (3 meters)
  • MMA Holder (3 meters)
  • Flux-cored Wire
  • Nozzle (5 pieces)
  • Nozzle Shield (2 pieces)
  • Welding Rod (5 pieces)
Image showing the ANDELI MIG 250 welding machine and its included accessories: ground clamp, MIG torch, MMA holder, flux-cored wire, nozzles, nozzle shields, and welding rods.

Figure 2: Included accessories with the MIG 250 welding machine.

4. Setup

Follow these steps to set up your ANDELI MIG 250 welding machine for operation.

4.1 Initial Inspection

Before connecting to power, inspect the machine for any visible damage. Ensure all cables and connectors are intact and free from wear or cuts.

4.2 Power Connection

The MIG 250 supports both 100V and 200V input voltages. Ensure your power supply matches the machine's requirements and that the appropriate plug is used. Connect the power cord securely to a grounded outlet.

4.3 Connecting Welding Cables

Front panel of the ANDELI MIG 250 showing connection points for ground clamp, MMA holder, and MIG torch.

Figure 3: Front panel connections.

  • Ground Clamp: Connect the ground clamp cable to the negative (-) terminal on the front panel. Attach the clamp securely to the workpiece, ensuring good electrical contact.
  • MIG Torch: For MIG (Flux-cored) welding, connect the MIG torch cable to the designated MIG connector on the front panel.
  • MMA Holder: For MMA (Stick) welding, connect the MMA electrode holder cable to the positive (+) terminal on the front panel.
  • Lift TIG: For Lift TIG welding, connect the TIG torch (not included in standard package) to the negative (-) terminal and the ground clamp to the positive (+) terminal.

4.4 Wire Feeding (MIG Mode)

Open the wire feed compartment. Install the flux-cored wire spool according to the machine's internal diagram. Thread the wire through the feed rollers and into the MIG torch liner. Ensure the wire diameter setting on the control panel matches the wire being used (0.8mm or 1.0mm).

4.5 Gasless Operation

The MIG 250 is designed for gasless flux-cored welding. No external gas cylinder is required for MIG operation with flux-cored wire.

5. Operating Instructions

The ANDELI MIG 250 features an intuitive LED screen and controls for easy operation.

Close-up of the ANDELI MIG 250 LED control panel showing digital display, wire diameter settings (0.8, 1.0), and mode indicators (MIG, Lift TIG, MMA).

Figure 4: LED Control Panel.

5.1 Control Panel Overview

  • LED Display: Shows current welding parameters (e.g., current, voltage).
  • Indicators: Icons for power, temperature, and wire feed speed.
  • Mode Selection: Buttons or selectors to choose between MIG, Lift TIG, and MMA welding modes.
  • Wire Diameter Selection: Buttons to select 0.8mm or 1.0mm wire for MIG welding.
  • Adjustment Knobs: Used to fine-tune welding current and voltage.

5.2 Welding Modes

Select the appropriate welding mode based on your material and application.

  • MIG (Flux-cored) Welding: Ideal for mild steel and some stainless steels. Use flux-cored wire for gasless operation. Adjust current and voltage according to wire diameter and material thickness. Examples include 1mm Stainless Steel Plate and 1mm/3mm Carbon Steel Plate.
  • Lift TIG Welding: Suitable for precise welding of stainless steel and other non-ferrous metals (with appropriate TIG torch and gas, if needed). Initiate arc by touching the tungsten electrode to the workpiece and lifting slightly. Recommended for 3mm Stainless Steel Plate.
  • MMA (Stick) Welding: Versatile for various metals and outdoor conditions. Use appropriate welding rods (e.g., 2.5 Electrode). Adjust current based on rod type and material.
Examples of welding applications for different modes: 1.0 MIG on Iron Plate, 0.8 MIG on Galvanized Pipe, MMA with 2.5 Electrode, and Lift TIG on Stainless Steel.

Figure 5: Welding application examples.

Visual examples of welding effects for MIG (Flux) on 1mm S.S Plate, 1mm C.S Plate, 3mm C.S Plate; TIG on 3mm S.S Plate; and MMA with 2.5 Electrode.

Figure 6: Examples of welding effects.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your welding machine.

  • Cleaning: Periodically clean the machine's exterior with a dry cloth. Use compressed air to blow out dust and debris from inside the machine, especially around cooling vents, to prevent overheating. Ensure the machine is unplugged before cleaning.
  • Cable Inspection: Regularly inspect all welding cables, ground clamp, and electrode holder for cuts, fraying, or loose connections. Replace damaged components immediately.
  • MIG Torch Maintenance: For MIG welding, regularly check and clean the contact tip, gas nozzle (if applicable), and diffuser. Replace worn-out contact tips and nozzles to ensure consistent wire feeding and arc stability.
  • Storage: Store the welding machine in a clean, dry environment, away from excessive dust, moisture, and corrosive materials.

7. Troubleshooting

This section addresses common issues you might encounter during operation.

7.1 No Power / Machine Not Turning On

  • Check if the power cord is securely plugged into a live outlet.
  • Verify the power switch on the machine is in the 'ON' position.
  • Check the circuit breaker or fuse in your electrical panel.

7.2 No Arc / Poor Arc Quality

  • Ground Connection: Ensure the ground clamp has a clean, secure connection to the workpiece.
  • Welding Parameters: Adjust current and voltage settings according to the material thickness and welding process.
  • Consumables: For MIG, check the contact tip for blockage or wear. For MMA, ensure the electrode is dry and suitable for the material. For TIG, ensure the tungsten is properly sharpened and clean.
  • Input Voltage: Confirm the machine is receiving the correct input voltage (100V or 200V).

7.3 Wire Feeding Problems (MIG Mode)

  • Spool Tension: Adjust the wire spool tension to prevent tangling or excessive drag.
  • Feed Rollers: Ensure the wire feed rollers are clean and the tension is correctly set for the wire diameter.
  • Liner: A dirty or kinked MIG torch liner can cause feeding issues. Clean or replace if necessary.
  • Contact Tip: A worn or blocked contact tip will impede wire feed. Replace if needed.

7.4 Overheating Indicator On

  • The machine has a thermal overload protection. Allow the machine to cool down.
  • Ensure adequate ventilation around the machine. Clear any obstructions from the air vents.
  • Reduce the duty cycle or welding current if continuously welding at high settings.

8. Specifications

The following table details the technical specifications of the ANDELI MIG 250 welding machine:

Detailed specification table for the ANDELI MIG 250 welding machine, including input voltage, output current and voltage for MIG, MMA, and TIG modes, duty cycle, protection, and insulation ratings.

Figure 7: Technical Specifications (EN 60974-1:2012).

AttributeValue
ModelMIG-250
DIY SuppliesElectrical
OriginMainland China (Zhejiang)
Material / Metal ProcessedStainless Steel
Rated Input Voltage100V~ / 200V~ (1~50Hz)
Wire Melting TypeShort Circuit Transfer
Max. Load Power Capacity5.9KW
Rated Output Current120A
Rated Output Voltage17.9V
Welding Current/Voltage Range20-120A
Rated Duty Cycle @40°C (MIG)60%
Wire Feeding Speed12 m/min
Weight4.0 KG (approx.)
Key Selling PointsPortable
Applicable IndustriesBuilding Material Shops, Machinery Repair Shops, Manufacturing Plant
Degree of ProtectionIP21S
Degree of InsulationF

9. User Tips

  • Practice Makes Perfect: If new to welding, start with scrap pieces to get a feel for the machine and different settings before working on important projects.
  • Cleanliness is Key: Always ensure your workpiece is clean and free of rust, paint, or oil for the best weld quality.
  • Ventilation: Even with gasless flux-cored wire, proper ventilation is crucial to disperse welding fumes.
  • Check Consumables: Regularly inspect and replace MIG contact tips, nozzles, and MMA electrodes as they wear down to maintain consistent performance.
  • Cable Management: Keep welding cables organized and away from hot surfaces or sharp edges to prevent damage.

10. Warranty and Support

The ANDELI MIG 250 welding machine comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please contact the seller or authorized service center. Ensure you have your product model and serial number ready when contacting support.

© 2023 ANDELI. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.