1. Introduction
This manual provides essential information for the safe and efficient use of your PowMr 51.2V 316Ah Floor Standing LiFePO4 Battery. This high-capacity lithium-ion battery is designed for home energy storage systems, offering a nominal energy of 16KWh. It features an easy-to-install, space-saving, and flexible assembly design, making it an ideal solution for modern energy needs.

2. Safety Precautions
Your safety is paramount. Please read and adhere to all safety instructions before installation and operation.
- Always handle the product with care. When removing from packaging, do not bump or hit it forcefully to avoid damage.
- The battery system incorporates advanced enhanced security features and a double safety protection design.
- A low-voltage switch design ensures safe power-on and reduces standby losses.
- The product is CE certified, indicating compliance with European safety standards.
- Ensure the installation environment is indoors and within the recommended operating temperature range.
- Do not attempt to open or modify the battery unit. Refer all servicing to qualified personnel.

3. Package Contents
Upon unpacking, please verify that all components are present and undamaged:
- PowMr 51.2V 316Ah Floor Standing LiFePO4 Battery Unit (Model: POW-LIO48300-16S)
- User Manual (this document)
- Any additional accessories (e.g., communication cables, mounting hardware) as specified in your purchase order.
4. Product Overview
The PowMr LiFePO4 battery is a robust energy storage solution featuring advanced technology for optimal performance and longevity.
4.1 Key Features
- Smart Touchscreen: An intuitive display interface allows users to easily monitor battery operating data and status, as well as configure communication protocols.
- Intelligent Management System (BMS): A high-quality BMS provides comprehensive safety for energy storage, continuously monitoring and adjusting battery status to extend service life.
- Built-in Balancing Module: This intelligent module ensures efficient cell balancing, contributing to the battery's impressive cycle life of over 6000 cycles at 80% Depth of Discharge (DOD).
- Floor-Standing Design: The unit is designed for easy installation and flexible assembly in a floor-standing configuration, optimizing space.
- Parallel Connection Support: Capable of parallel connections for increased capacity, up to 16 units.


5. Setup and Installation
The PowMr battery is designed for easy installation. For detailed wiring diagrams and step-by-step instructions, please refer to the comprehensive user manual PDF available online or contact technical support.
5.1 Unpacking
- Carefully remove the product from the packaging. Do not bump or hit it forcefully to avoid damage.
- Inspect the unit for any signs of physical damage. If damage is found, contact your supplier immediately.
5.2 Placement
- Place the battery unit indoors in a location that is dry, well-ventilated, and within the recommended operating temperature range (see Specifications).
- Ensure sufficient clearance around the unit for proper airflow and maintenance.
- The floor-standing design allows for flexible placement.
5.3 System Integration
This battery is intended for integration into a home energy storage system, typically involving solar panels and an inverter. The system supports hybrid grid connections.

For detailed wiring and connection procedures with your inverter and solar array, consult the specific installation guide for your complete system. The battery unit provides RS232, RS485, CAN, and Dry Contact communication interfaces for system integration.
6. Operation
Once installed and connected, the battery system operates largely autonomously, managed by its intelligent BMS. User interaction primarily involves monitoring and configuration via the touchscreen interface.
6.1 Powering On/Off
The low-voltage switch design facilitates safe power-on. Refer to the detailed online instructions for the exact power-on sequence for your specific system configuration.
6.2 Monitoring and Configuration
- Use the integrated touchscreen to view real-time battery data, including charge status, voltage, current, and temperature.
- The touchscreen also allows for configuration of communication protocols and other operational parameters.
6.3 Parallel Operation
This battery supports parallel connections for increased energy storage capacity, with a maximum of 16 parallel units. Ensure all units are correctly configured for parallel operation according to the detailed system manual.
7. Maintenance
The PowMr LiFePO4 battery is designed for minimal maintenance. Regular checks can help ensure optimal performance and longevity.
- Environmental Conditions: Ensure the battery operates within the recommended indoor environment and temperature ranges (Charging: 0~60°C; Discharging: -10°C~65°C). Avoid extreme temperatures and high humidity.
- Physical Inspection: Periodically check the unit for any visible damage, loose connections, or unusual odors.
- Cleaning: Keep the exterior of the battery unit clean and free from dust. Use a dry, soft cloth for cleaning. Do not use liquid cleaners.
- Software Updates: If available, ensure the battery management system firmware is up-to-date. Consult technical support for guidance on updates.
8. Troubleshooting
If you encounter issues with your PowMr battery, refer to the following basic troubleshooting steps. For complex problems, contact technical support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Battery not powering on | Loose power connections, low voltage, internal fault. | Check all power connections. Ensure the main power switch is on. If problem persists, contact support. |
| Abnormal readings on touchscreen | Communication error, sensor issue, BMS fault. | Restart the unit. Check communication cables. If issue continues, contact support. |
| Reduced capacity or performance | Operating outside temperature range, aging, system imbalance. | Verify operating environment. Ensure proper ventilation. Contact support for diagnostics. |
9. Specifications
Detailed technical specifications for the PowMr 51.2V 316Ah LiFePO4 Battery (Model: POW-LIO48300-16S):
| Parameter | Value |
|---|---|
| Battery Model | POW-LIO48300-16S |
| System Voltage | 51.2V |
| Rated Capacity | 316Ah |
| Nominal Energy | 16179.2Wh (16KWh) |
| Constant Voltage Charging Voltage | 58.4V |
| Max Charging Current (Icm) | 200A |
| Max Discharging Current | 200A |
| Max. No. of Parallel Connections | 16 |
| Communication Interface | RS232/RS485/CAN/Dry Contact |
| Cycle Life | ≥6000 Times @80%DOD, 25℃ |
| Operating Temperature (Charging) | 0~60°C |
| Operating Temperature (Discharging) | -10°C~65°C |
| IP Grade | IP21 |
| Recommended Operation Environment | Indoor |
| DIY Supplies | Electrical |
| Certification | CE |
| Battery Type | Lithium Ion (LiFePO4) |
| Output Power Range | 5-10KW |
| System Type | Floor-standing |
| Grid Connection | Hybrid grid |
10. User Tips
- Consult Online Resources: For detailed installation and operation guidance, including videos for disassembly, assembly, and operation, refer to the manufacturer's official online resources.
- Monitor Regularly: Utilize the smart touchscreen to regularly monitor battery status and performance. This helps in early detection of any anomalies.
- Maintain Optimal Environment: Ensure the battery is kept in a stable indoor environment, avoiding extreme temperatures and direct sunlight, to maximize its lifespan and efficiency.
- Parallel System Configuration: If using multiple units in parallel, ensure all communication and power connections are correctly established and configured as per the system's detailed instructions.
11. Warranty and Support
For any technical assistance, warranty claims, or detailed inquiries, please contact PowMr customer support.
11.1 Technical Support
Lifetime online support is available through various channels such as Whatsapp, Skype, Wechat, and Email. Video call support is also offered for troubleshooting any issues after delivery.
11.2 User Manual PDF
A comprehensive user manual in PDF format is available for download, providing in-depth instructions and diagrams. You can access it via the following link: PowMr LiFePO4 Battery User Manual (PDF)