Loefme MD602

Contents

LOEFME Electric Dehumidifier MD602 User Manual

Model: MD602

1. Product Overview

The LOEFME Electric Dehumidifier MD602 is designed to efficiently remove excess moisture from your home, creating a healthier and more comfortable living environment. Featuring a quiet operation, an 1800ml water tank, and smart functions like a timer and automatic shut-off, it is suitable for various small to medium-sized spaces.

LOEFME Dehumidifier with control panel and feature icons
Figure 1: LOEFME Dehumidifier with key features highlighted: Touch button, Timing mode, Below 35 dB operation, 1800ml Water Tank, Environmental Protection, and Colorful Lights. Includes power adapter and user manual.

2. Safety Instructions

  • Read all instructions before using the appliance.
  • Do not operate the dehumidifier with a damaged cord or plug.
  • Ensure the appliance is placed on a stable, level surface.
  • Keep the air inlet and outlet clear of obstructions.
  • Do not immerse the unit, power cord, or plug in water or other liquids.
  • Unplug the dehumidifier before cleaning or performing any maintenance.
  • This appliance is for indoor household use only.

3. Setup and Installation

3.1 Unpacking

Carefully remove the dehumidifier from its packaging. Retain the packaging for future storage or transport.

3.2 Placement

Place the dehumidifier in the desired location, ensuring it is on a flat, stable surface. For optimal performance, allow at least 20 cm (8 inches) of space around the air inlet and outlet for proper airflow. The unit is suitable for rooms about 15-35 m².

Dehumidifier suitable for various room types and sizes
Figure 2: The dehumidifier is suitable for various spaces including living rooms, bedrooms, study rooms, bathrooms, baby rooms, and basements, covering areas of approximately 15-35 m².

3.3 Power Connection

Connect the power adapter to the dehumidifier and then plug it into a suitable electrical outlet (240V). Ensure the power cord is not pinched or damaged.

4. Operating Instructions

4.1 Control Panel

The dehumidifier features a touch control panel for easy operation.

4.2 Power On/Off

  • Press the power button (ⓘ) to turn the dehumidifier on or off.

4.3 Timing Mode

The unit includes a timing mode for scheduled operation.

  • Press the timer button (ⓒ) to set the desired operating duration (e.g., 6, 8, or 10 hours). The dehumidifier will automatically shut off after the set time.

4.4 Colorful Lights

The dehumidifier features colorful ambient lights.

  • Press the light button (ⓔ) to cycle through the 7 available colors or to lock it on your favorite color.
Dehumidifier with 7 colors of lights
Figure 3: The dehumidifier offers 7 colors of lights, which can be manually locked to a preferred color.

4.5 Automatic Shut-Off

The dehumidifier is equipped with an automatic shut-off feature for safety and convenience.

  • When the 1800ml water tank is full, the unit will automatically stop dehumidifying, and the control lamp will light up red.
  • The unit will also stop if the target humidity level is reached (if applicable, based on smart mode settings).
Automatic shutdown protection illustration
Figure 4: Illustration of automatic shutdown protection. The top image shows normal operation with blue water. The bottom image shows the water tank full, with the control lamp turning red and the unit switching off automatically.

4.6 Quiet Operation

The dehumidifier operates at a low noise level of under 35dB, ensuring it does not disturb sleep or work.

Dehumidifier quiet operation comparison
Figure 5: Noise level comparison, showing the dehumidifier operating at 35dB, comparable to rustling leaves (20dB) and significantly quieter than an office (60dB) or street (75dB).

5. Maintenance

5.1 Emptying the Water Tank

When the water tank is full, the dehumidifier will automatically shut off. Follow these steps to empty the tank:

  1. Remove the water tank from the unit.
  2. Take off the tank cover.
  3. Pour out the collected water.
  4. Reset the tank back into the dehumidifier, ensuring it is securely in place. The unit will resume operation.
Water tank removal and emptying instructions
Figure 6: Step-by-step guide for easy water tank removal and emptying.

5.2 Cleaning the Unit

  • Wipe the exterior of the dehumidifier with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Periodically clean the air inlet and outlet grilles to prevent dust buildup, which can affect performance.

6. Troubleshooting

ProblemPossible CauseSolution
Dehumidifier does not turn on.No power supply.Check if the power adapter is securely plugged into the unit and the wall outlet. Ensure the outlet is functional.
Dehumidifier stops working.Water tank is full.Empty the water tank and reinsert it correctly.
Timer function is active.Check if the timer is set to turn off the unit. Adjust or disable the timer if continuous operation is desired.
Air inlet/outlet blocked.Ensure there are no obstructions around the air vents.
No or low dehumidification.Room temperature too low.Dehumidifiers are most effective in warmer, humid conditions. The unit has an automatic defrost function for low temperatures.
Air filter is dirty.Clean the air filter (if applicable) or ensure air vents are clear.
Unusual noise during operation.Unit not on a level surface.Place the dehumidifier on a flat, stable surface.

7. Specifications

FeatureSpecification
Model NumberMD602
Brand NameLoefme
Dimensions (L x W x H)162 x 130 x 250 mm
Dehumidification Volume<1.1 L/h
Daily Removal Capacity450 mL/Day (at 30°C/80% RH)
Water Tank Capacity1800 mL
Power (W)22.5 W
Voltage240 V
Control StyleTouch
FunctionsAutomatic Bucket Full Shut-Off, Automatic Defrost, Bucket Full Indicator Light, Removable Water Tank, Timing Mode, Colorful Lights
Noise LevelBelow 35 dB
CertificationCE
OriginMainland China

8. User Tips

  • Optimal Placement: For best results, place the dehumidifier in the center of the room or area you wish to dehumidify, away from walls and furniture that might block airflow.
  • Close Doors and Windows: To maximize efficiency, keep doors and windows closed in the room where the dehumidifier is operating.
  • Regular Emptying: Empty the water tank regularly to ensure continuous operation and prevent the unit from shutting off prematurely.
  • Energy Saving: Utilize the timer function to operate the dehumidifier only when needed, such as during peak humidity hours or while you are away.
  • Monitor Humidity: While this model doesn't have a digital display for humidity, you can use an external hygrometer to monitor the room's humidity and adjust the dehumidifier's operation accordingly. Aim for 45-55% relative humidity.

9. Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.