MOFii X910

Contents

MOFii X910 Wireless Numeric Keypad User Manual

Brand: MOFii

Model: X910

Introduction

The MOFii X910 is a compact and aesthetically pleasing 2.4Ghz wireless numeric keypad designed for convenient data entry. It features 18 independent buttons with a retro round keycap design and is plug-and-play compatible with various operating systems.

Video: Overview of the MOFii X910 Wireless Numeric Keypad, showcasing its design and functionality.

Safety Information (FCC Compliance)

Information to User

  • This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
  • If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
    • Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and receiver.
    • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    • Consult the dealer or an experienced radio/TV technician for help.
  • Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.

Setup Guide

1. Installing the Battery

  • The RF2.4GHz keyboard uses one AAA alkaline battery.
  • Step 1: Remove the battery compartment cover on the bottom of the keyboard by squeezing the cover tab to release it.
  • Step 2: Insert the battery as shown in the diagram inside the battery compartment.
  • Step 3: Replace the cover.
Diagram showing how to install a AAA battery into the numeric keypad's battery compartment.

Figure: Battery installation diagram.

2. Connecting the Receiver

  • The receiver can be inserted into a USB port directly or via an extra USB cable.
Diagram showing the nano receiver and a USB port, indicating where to plug it in.

Figure: Nano receiver and USB port connection.

Illustration of the nano receiver inserted into a laptop's USB port.

Figure: USB receiver inserted into a laptop.

Operating Instructions

Plug and Play Functionality

  • The MOFii X910 numeric keypad is designed for plug-and-play operation. Once the USB receiver is connected to your computer, the keypad should be recognized automatically without the need for additional drivers.
  • Simply start typing numbers or using the function keys as needed.
Image showing the numeric keypad connected to a laptop via USB, with text 'It's plug-and-play via USB. No driver is required'.

Figure: The keypad offers plug-and-play functionality via USB, requiring no driver installation.

Maintenance

Battery Replacement

  • When the keypad's performance degrades or it stops responding, it's likely time to replace the AAA battery. Follow the "Installing the Battery" steps in the Setup Guide to replace the battery.

Cleaning

  • To clean the keypad, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used. Avoid using harsh chemicals or abrasive materials.

Troubleshooting

Restoring Factory Default Settings

  • If your wireless keyboard is not working, you can restore it to factory default settings to bring it back to working condition.
  • Step 1: Check if the battery level is normal. If the battery is depleted, please replace it with new batteries.
  • Step 2: Insert the USB receiver into the USB port of your PC or notebook.
  • Step 3: While inserting the battery into the keyboard, the keyboard's LED lights will flash quickly, indicating that the factory settings have been successfully restored.

Other Considerations

  • Power-saving design: When the keyboard does not register any action for about 2 seconds, it enters hibernation mode. Press any key to wake it up.
  • Battery: The system operates on a 1.5V system, powered by one AAA dry battery.

Specifications

FeatureDetail
Product BrandMOFii
Product ModelX910 wireless numeric keyboard
Number of Keys18 keys
Interface TypeUSB (for receiver)
Operation StyleMembrane
Type2.4Ghz Wireless
LanguageEnglish
Keyboard StandardMini Keyboard
ApplicationNumber
Battery Required1 AAA battery (not included)
Product Weight105g ± 5g
Product Size90x135x25(h) ± 2mm
Support SystemWindows XP/win7/win8/win10
Wireless Transmission Distance10 meters
Image displaying product parameters including brand, model, number of keys, weight, size, and supported systems.

Figure: Detailed product parameters for the X910 numeric keypad.

Diagram showing the dimensions of the numeric keypad: 90mm width and 135mm length.

Figure: Keypad dimensions.

User Tips

  • For optimal performance, ensure your AAA battery is fresh. Low battery can cause intermittent connectivity or unresponsiveness.
  • If experiencing lag or disconnections, try plugging the USB receiver into a different USB port on your computer.
  • The compact size makes it ideal for travel; remember to pack a spare AAA battery if you're on the go.

Warranty and Support

  • For warranty information and technical support, please refer to the official MOFii website or contact your retailer.
  • A user manual PDF is available for download: MOFii X910 User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.