1. Introduction
This manual provides essential information for the safe and efficient use of your EVE LF280K V3 280AH LiFePO4 prismatic battery cells. Please read this manual thoroughly before installation and operation to ensure proper handling and to maximize the lifespan and performance of your batteries.
2. Product Overview
The EVE LF280K V3 is a high-performance 3.2V 280Ah LiFePO4 (Lithium Iron Phosphate) prismatic battery cell, designed for various applications requiring reliable and long-lasting power storage. These cells feature M6 studs for secure connections and are built for durability.
Figure 2.1: Single EVE LF280K V3 LiFePO4 battery cell, showing the label with model, voltage, capacity, and energy.
Figure 2.2: Four EVE LF280K V3 LiFePO4 battery cells packaged in protective foam, as typically received.
3. Specifications
The following table details the technical specifications for the EVE LF280K V3 280AH battery cell:
| Parameter | Value |
|---|---|
| Model | LF280K V3 |
| Nominal Voltage | 3.2V |
| Nominal Capacity | 280Ah |
| Energy | 896Wh |
| Internal Resistance | ≤0.25mΩ |
| Max Charge Current | 1C (280A) |
| Max Discharge Current | 3C (840A) |
| Charge Cut-off Voltage | 3.65 ±0.05 V |
| Discharge Cut-off Voltage | 2.5 ±0.05 V |
| Weight | 5.35 ±0.2 kg |
| Dimensions (L x W x H) | 207.2mm x 173.7mm x 72mm |
| Terminal Type | M6 Studs |
| Cycle Life | ≥6000 cycles @ 0.5C/0.5C, 80% DOD |
| Operating Temperature (Charge) | 0°C to 55°C |
| Operating Temperature (Discharge) | -20°C to 55°C |
| Self-Discharge Rate | ≤3.5% per month |
| Material | Metal |
| Origin | Mainland China |
Figure 3.1: Detailed dimensions of the EVE LF280K V3 battery cell.
Figure 3.2: Comprehensive specifications and critical warnings for the EVE LF280K V3 battery.
4. Safety Information
WARNING: Failure to follow these safety instructions can result in fire, electric shock, injury, or damage to the battery and other property.
- Always use a professional Battery Management System (BMS) to protect the battery from overcharge, overdischarge, overcurrent, and overtemperature.
- Do not short circuit the battery terminals. Ensure proper insulation and secure connections.
- Do not disassemble, crush, puncture, or modify the battery cells.
- Do not expose the battery to fire, high temperatures, or direct sunlight.
- Do not immerse the battery in water or other liquids.
- Keep batteries out of reach of children and pets.
- In case of leakage, contact with skin or eyes, rinse immediately with plenty of water and seek medical attention.
- Dispose of batteries according to local regulations. Do not dispose of with household waste.
5. Setup and Installation
Before installation, inspect each battery cell for any physical damage. Ensure all cells are at a similar state of charge and voltage before connecting them.
- Initial Inspection: Visually inspect each cell for any signs of damage.
- Voltage Check: Measure the voltage of each cell to ensure they are within a safe operating range and are consistent if connecting multiple cells.
- Terminal Connections: The cells are equipped with M6 studs. Use appropriate busbars and nuts (often included as free accessories) to make secure electrical connections. Ensure all connections are tight to prevent resistance and heat buildup.
- Series/Parallel Connection Guidelines:
- When connecting batteries in series, ensure that the voltage of each battery is consistent.
- When connecting batteries in parallel, ensure that the internal resistance of each battery is consistent.
- Failure to follow these guidelines can cause damage to the battery cells.
- BMS Installation: Install a suitable Battery Management System (BMS) according to its manufacturer's instructions. The BMS is crucial for protecting the battery from various fault conditions.
- Secure Mounting: Mount the battery cells securely in a well-ventilated area, protecting them from physical impact and extreme temperatures.
Figure 5.1: Top view of a single EVE LF280K V3 battery cell, highlighting M6 terminals for connection.
6. Operating Instructions
Operate your LiFePO4 battery system within the specified parameters to ensure optimal performance and longevity.
- Charging:
- Use a charger compatible with LiFePO4 batteries.
- Standard charging current: 0.5C (140A).
- Maximum charging current: 1C (280A).
- Charge to 3.65V per cell. The BMS will manage the charging process and cut off when full.
- Operating temperature for charging: 0°C to 55°C.
- Discharging:
- Standard discharging current: 0.5C (140A).
- Maximum discharging current: 3C (840A).
- Discharge down to 2.5V per cell. The BMS will prevent over-discharge.
- Operating temperature for discharging: -20°C to 55°C.
- Monitoring: Regularly monitor cell voltages, temperatures, and overall system performance via your BMS.
7. Maintenance
Proper maintenance will extend the life and performance of your LiFePO4 battery cells.
- Regular Inspection: Periodically check terminals for corrosion or looseness. Ensure all connections are clean and tight.
- Cleaning: Keep the battery cells clean and free from dust and debris. Use a dry cloth for cleaning.
- Temperature Control: Ensure the battery operates within the recommended temperature ranges. Avoid prolonged exposure to extreme heat or cold.
- Storage: If storing the batteries for an extended period, charge them to approximately 50% state of charge (around 3.25-3.3V per cell) and store in a cool, dry place. Check the voltage periodically and recharge if necessary.
- BMS Check: Ensure your BMS is functioning correctly and all cell balancing is active.
8. Troubleshooting
If you encounter issues with your battery cells, consider the following common problems and solutions:
- Battery Not Charging:
- Check charger connection and power supply.
- Verify BMS status; it might have triggered a protection mode (e.g., over-voltage, under-temperature).
- Inspect individual cell voltages for significant imbalance.
- Battery Not Discharging / Low Power Output:
- Check load connections and ensure they are secure.
- Verify BMS status; it might have triggered a protection mode (e.g., under-voltage, over-current, over-temperature).
- Ensure the load is within the battery's maximum discharge current limits.
- Cell Imbalance:
- A good BMS should actively balance cells. If imbalance persists, check BMS connections and functionality.
- Ensure all cells were at a similar state of charge before initial assembly.
- Overheating:
- Reduce charge/discharge current if operating near maximum limits.
- Ensure adequate ventilation around the battery bank.
- Check for loose connections which can cause resistance and heat.
For persistent issues, consult with a qualified technician or contact customer support.
9. User Tips
- Pre-Assembly Balancing: For optimal performance and longevity, it is highly recommended to top balance all cells to their full charge voltage (3.65V) before assembling them into a battery pack. This ensures all cells start at the same state of charge.
- BMS Selection: Invest in a high-quality BMS that matches your system's voltage and current requirements. A robust BMS is the most critical component for protecting your LiFePO4 investment.
- Temperature Management: While LiFePO4 batteries are robust, maintaining them within their optimal operating temperature range (especially during charging) will significantly improve their lifespan. Consider active cooling or heating solutions for extreme environments.
10. Warranty and Support
For warranty information, technical support, or any questions regarding your EVE LF280K V3 280AH LiFePO4 battery cells, please contact the seller or manufacturer directly. Keep your purchase records for any warranty claims.