Kuqibao Intercom Bluetooth Motorcycle Helmet User Manual

Introduction

This manual provides detailed instructions for the safe and effective use of your Kuqibao Intercom Bluetooth Motorcycle Half Helmet. Please read this manual thoroughly before using the product to ensure proper operation and to prevent damage.

The Kuqibao helmet is designed for motorcycle riders, featuring a durable ABS shell, a comfortable and washable lining, and a high-definition anti-scratch visor. It integrates a Bluetooth intercom system for communication and entertainment on the go.

Important Safety Information

• Always wear a helmet that fits correctly and is securely fastened.
• Ensure the visor is clean and free from obstructions for clear vision.
• Do not place the helmet at a high place to avoid falling and potential damage.
• Regularly inspect the helmet for any signs of wear or damage. Replace if compromised.
• Do not modify the helmet or its components, as this may compromise its safety features.
• The Bluetooth intercom should be used responsibly and in compliance with local traffic laws.

Package Contents

Your package should contain the following items:

• Kuqibao Motorcycle Half Helmet
• Bluetooth Intercom Unit (if purchased with intercom)
• Charging Cable for Intercom
• User Manual (this document)

Setup

1. Helmet Fitting and Adjustment

Proper helmet fit is crucial for safety and comfort. Refer to the size chart below to ensure you have the correct size.

Correct measurement of head circumference: Eyebrow bone: the bone at the eyebrows, that is, the highest point of the forehead. Pillow bone: the protrusions at the back, that is, the minimum point of the back is at the starting point of the brow bone, and the soft ruler is attached to the scalp. The circumference of the pillow bone is around the temples, which is the head circumference.

Once the helmet is on, adjust the chin strap so it is snug but comfortable. The helmet should not move freely on your head.

2. Bluetooth Intercom Installation (if applicable)

If your helmet did not come with the intercom pre-installed, attach the Bluetooth intercom unit to the side of the helmet using the provided mounting mechanism. Ensure it is securely fastened and does not obstruct your vision or helmet functionality.

3. Charging the Bluetooth Intercom

Before first use, fully charge the Bluetooth intercom unit. Connect the charging cable to the charging port on the intercom unit and a suitable USB power source. The charging indicator light (red) will illuminate during charging and turn off when fully charged.

Operating Instructions

The Bluetooth intercom unit (K21) features several controls for easy operation:

1. Power On/Off, Play/Pause, Answer Key: This multi-function button controls power, music playback, and call answering.
2. Volume Plus / Next Song: Press to increase volume, hold to skip to the next song.
3. Volume Reduction / First Song: Press to decrease volume, hold to go to the previous song.
4. AI Voice Key: Activates the AI voice assistant on your connected device.
5. Light Switch Key: Controls the colorful atmosphere lights on the intercom unit.
6. Charging Port: Used for charging the intercom unit.
7. Work Indicator Light (Blue): Indicates the intercom's operational status.
8. Charging Indicator Light (Red): Indicates charging status.
9. Speaker/Wheat Interface: Connects to the helmet's speakers and microphone.

Bluetooth Pairing

To pair your intercom with a mobile device:

1. Ensure the intercom is charged and turned off.
2. Press and hold the Power On/Off button until the work indicator light (blue) flashes rapidly, indicating pairing mode.
3. On your mobile device, enable Bluetooth and search for available devices.
4. Select "Kuqibao K21" (or similar name) from the list.
5. Once paired, the blue indicator light will flash slowly or remain solid.

Call Handling

• Answer Call: Press the Power On/Off button once.
• End Call: Press the Power On/Off button once during a call.
• Reject Call: Press and hold the Power On/Off button when a call comes in.

Music Playback

• Play/Pause: Press the Power On/Off button once.
• Next Song: Hold the "Volume Plus" button.
• Previous Song: Hold the "Volume Reduction" button.

Atmosphere Lights

The intercom features colorful atmosphere lights that can be switched between three colors (red, blue, green) using the Light Switch Key. This provides a cool and eye-catching effect, especially at night.

Maintenance

Helmet Cleaning

• Exterior: Clean the helmet's exterior with a soft cloth and mild soap and water. Avoid harsh chemicals or abrasive cleaners.
• Visor: The helmet features high-definition anti-scratch lenses. Clean the visor with a soft, damp cloth and mild soap. Do not use abrasive materials that could scratch the surface.
• Lining: The helmet has a removable and washable lining. Remove the lining according to the instructions (if provided in the PDF manual) and hand wash with mild detergent. Allow to air dry completely before re-installing.

Bluetooth Intercom Care

• Keep the intercom unit dry. Do not expose it to excessive moisture.
• Clean the unit with a dry, soft cloth.
• Avoid extreme temperatures.

Troubleshooting

Specifications

User Tips

• For optimal sound quality, ensure the helmet speakers are positioned directly over your ears.
• Regularly check the charge level of your intercom, especially before long rides.
• Utilize the AI voice key for hands-free control of your smartphone's functions while riding.

Warranty and Support

For warranty information and technical support, please contact the manufacturer directly using the contact details provided in the specifications section. You may also refer to the official user manual PDF for additional details:

View User Manual (PDF)

The product is manufactured in Mainland China and holds DOT and GB quality certifications.