1. Introduction
The BALASHOV TC-SC-002 is a powerful 2500W high-temperature and high-pressure handheld steam cleaner designed for versatile cleaning tasks. It effectively removes stubborn dirt, oil stains, and grime from various surfaces, including air conditioners, kitchen hoods, car interiors, floors, and more. The device utilizes high-temperature steam to sterilize and disinfect, killing up to 99.9% of bacteria without the need for harsh chemicals.
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your steam cleaner.
2. Safety Information
Please read and understand all safety instructions before using the appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- High Temperature Steam: The steam produced by this cleaner is extremely hot (≥105°C) and under high pressure (3 BAR). Always direct the steam away from yourself, other people, pets, and electrical components.
- No Automatic Trigger: Note that there is no automatic on/off control trigger on the handle to start and stop the steam. Steam flow is continuous once the unit is operating.
- Electrical Safety: Ensure the power supply matches the device's requirements (220V EU Plug). Do not operate the cleaner with a damaged cord or plug.
- Water Tank: Never overfill the water tank. Always ensure the safety cover is securely closed before operation.
- Anti-Dry Protection: The unit is equipped with anti-dry protection, but it is crucial to monitor water levels during use.
- Hose and Handle: The steam hose is double-layered, explosion-proof, anti-winding, and high-temperature resistant. Always handle the spray gun and hose with care.
- Children and Pets: Keep the appliance out of reach of children and pets.
3. Product Overview
3.1 Components
The BALASHOV steam cleaner consists of the main unit, a handheld spray gun, a steam hose, and various attachments for different cleaning needs.

- Main Unit: Houses the heating element, water tank, and controls.
- Handheld Spray Gun: The primary tool for directing steam.
- Steam Hose: Connects the main unit to the spray gun (2.2 meters long).
- Gear Adjustment Knob: Located on the main unit for steam intensity control (six-gear adjustment).
- Glass Water Tank: Transparent tank for easy monitoring of water level.
3.2 Included Accessories
The steam cleaner comes with a range of interchangeable nozzles and brushes to tackle various cleaning challenges.

- Lengthened Elbow Nozzle: For reaching difficult areas.
- Steel Brush: For heavy-duty scrubbing of tough stains.
- Brush (Nylon): General-purpose brush for various surfaces.
- Large Brush: For wider cleaning areas.
- Other specialized nozzles/brushes: (Refer to packaging for specific types if not listed here).
4. Specifications
| Feature | Specification |
|---|---|
| Brand Name | BALASHOV |
| Model Number | TC-SC-002 |
| Cleaner Type | Steam Cleaner |
| Power (W) | 2500W (2401-2600W range) |
| Voltage | 220-240V |
| Plug Type | EU Plug |
| Steam Temperature | ≥105°C |
| Steam Pressure | 3 BAR |
| Steam Pipe Length | 2.2 meters |
| Heating Time | Approx. 10-15 seconds |
| Machine Dimensions (L*W*H) | 190*150*130MM |
| Water Tank Capacity | Basic: 900ml, Upgraded: 1200ml |
| Origin | Mainland China |
5. Setup Instructions
Follow these steps to prepare your steam cleaner for use:
- Place the Unit: Position the steam cleaner on a stable, flat surface.
- Open Safety Cover: Carefully open the safety cover of the water tank.
- Add Water: Fill the glass water tank with clean tap water. Do not exceed the maximum fill line. You may add liquid medicine or disinfectant if desired, ensuring it is compatible with steam cleaners.
- Close Safety Cover: Securely close the safety cover.
- Attach Accessories: Select the appropriate nozzle or brush for your cleaning task and firmly attach it to the handheld spray gun.
- Connect Power: Plug the power cord into a suitable 220-240V EU electrical outlet.
- Heat Water: Turn on the power switch. The unit will begin heating the water. This typically takes approximately 10-15 seconds.
- Ready for Use: Once heated, steam will be continuously produced from the nozzle.

6. Operating Instructions
Once the unit is set up and heated, you can begin cleaning. Remember that steam is continuously produced.
- Select Steam Intensity: Use the six-gear adjustment knob on the main unit to control the steam output level according to the cleaning task and surface.
- Direct Steam: Point the handheld spray gun nozzle directly at the surface you wish to clean. For best results, hold the nozzle close to the surface.
- Cleaning Techniques:
- Stubborn Stains: For heavily soiled areas like kitchen hoods or burnt pots, use the steel brush attachment and apply steam directly.
- General Surfaces: For walls, floors, and washbasins, use appropriate brush attachments and move the nozzle steadily across the surface.
- Delicate Surfaces/Car Interiors: Use a softer brush or a cloth over a nozzle (if applicable) and test on an inconspicuous area first.
- Air Conditioners: Carefully direct steam into the fins and coils to remove dust and bacteria.
- Wipe Clean: After steaming, wipe the cleaned surface with a clean, dry cloth to remove loosened dirt and moisture.
- Continuous Operation: The large capacity water tank allows for sustainable work for approximately 1 hour.


7. Maintenance
Proper maintenance ensures the longevity and optimal performance of your steam cleaner.
- Empty Water Tank: After each use, always unplug the unit and allow it to cool down. Then, carefully pour out any remaining water from the tank.
- Clean Accessories: Rinse all nozzles and brushes with clean water after use. Remove any debris or residue.
- Wipe Down Unit: Wipe the exterior of the main unit and spray gun with a damp cloth.
- Storage: Store the steam cleaner and its accessories in a cool, dry place, away from direct sunlight and extreme temperatures.
8. Troubleshooting
If you encounter issues with your steam cleaner, refer to the following common problems and solutions:
- No Steam Production:
- Check if the unit is properly plugged in and the power switch is on.
- Ensure the water tank is filled with water.
- Allow sufficient time (10-15 seconds) for the water to heat up.
- Weak Steam:
- Check the water level in the tank.
- Ensure the nozzle is not clogged. Clean if necessary.
- Adjust the gear adjustment knob to a higher setting.
- Water Leaking:
- Ensure all attachments are securely fastened.
- Check that the water tank safety cover is tightly closed.
If the problem persists, please contact customer support.
9. User Tips
- Optimal Cleaning: For the most effective cleaning, hold the steam nozzle as close as possible to the surface being cleaned.
- Versatility: The long power cord and steam hose (2.2m) make it easy for a single person to operate and reach various areas without constantly moving the main unit.
- Disinfection: Take advantage of the high-temperature steam to sterilize items like chopsticks, milk bottles, and nipples.
- Chemical-Free Cleaning: While you can add disinfectants, the steam cleaner is highly effective at cleaning and sanitizing using only water, making it an eco-friendly option.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's contact information or the product packaging. Keep your purchase receipt as proof of purchase.