AZDOME PG17 Pro

Contents

AZDOME PG17 Pro 4K+2.5K Mirror Dash Cam User Manual

Model: PG17 Pro

Introduction

Thank you for purchasing this AZDOME dashcam. This instruction manual contains information on how to operate your dashcam. Before using your dashcam, we recommend that you read through this manual to ensure correct usage. To improve the performance of the product, the contents of this manual are subject to change without prior notice. Please read and understand the manual before operating.

  • Please ALWAYS connect with power when using.
  • AZDOME PG17 Pro comes with an AZDOME 128GB memory card in the package. Please format your memory card before first use to ensure better recording.

For a multilingual manual, please refer to the PDF User Manual.

1. Getting Started

What's Included

The package contains the following accessories. If any accessories are missing after receiving the goods, please contact us as soon as possible.

Packing Box contents including Mirror Dash Cam, Rear Camera, Car Charger, GPS Module, Anti-Glare Film, Cable Clips, Pry Tool, Cleaning Wipes, Cleaning Cloth, 128GB SD Card, and User Manual.

Image: Contents of the AZDOME PG17 Pro Dash Cam packing box.

  • Mirror Dash Cam
  • 2.5K Rear Camera
  • Type-C USB Car Charger
  • GPS Module
  • Anti-Glare Film
  • Cable Clip*5
  • Pry Tool
  • Cleaning Wipes
  • Cleaning Cloth
  • 128GB SD Card
  • User Manual

PLEASE NOTE:

PG17 Pro comes with a 128GB SD card. The PG17 Pro dash cam supports memory cards of up to 256GB. We recommend using a Class 10, U3, A2 Speed Micro-SD memory card. Unqualified memory cards may cause the machine to restart repeatedly or incomplete recordings. Please format your memory card before first use to ensure better recording.

2. Installation

For a visual guide, scan the QR code below to watch the installation video:

QR code to watch the installation video.

Image: QR code for installation video.

Mount the Mirror Dash Cam

  • There are two sets of straps (different lengths) supplied with the Stream Media Mirror Dash Camera; select the size to best suit your vehicle's rear-view mirror.
  • The straps should be a tight fit when fitted, thus ensuring the Stream Media Mirror Dash Camera is securely fitted to the existing rear-view mirror.
  • Attach the upper end of the straps to the retaining hooks on the top of the rear-view mirror.
  • Put the mirror dash cam in position on the front face of your existing rear view mirror.
  • Extend the straps around the back of the rear-view mirror and attach them to the bottom retaining hooks.
Diagram showing how to mount the mirror dash cam using straps on the rearview mirror.

Image: Diagram illustrating the strap-based mounting of the mirror dash cam.

Apply the Anti-glare Film

  1. Peel the protective paper cover off the film and apply it to the monitor.
  2. Start in the top left corner and smooth the plastic against the monitor carefully to avoid trapping air between the monitor and the film.

PLEASE NOTE:

Anti-glare film only reduces glare but does not eliminate it.

Rear Camera Installation

The rear camera is equipped with a 6-meter cable to connect to the dash-cam via the AV port. Before installation, please check if the provided cable is long enough to reach the rear cam in your car.

Diagram showing two positions for rear camera installation: Position A on the rear windshield and Position B near the license plate.

Image: Diagram for rear camera installation positions.

  • Position A: Install the rear camera on the rear windshield. Position A is designed for live stream rear review only, not for reversing guide. The installation is easier.
  • Position B: Install the rear camera near the license plate. The back image is crisp and clear for both rear viewing and reversing guide.

Instructions for Reverse Trigger Wiring

To use the reversing function, install the rear camera in position B, then connect the red cable of the rear camera extension cable to the anode of the car reversing lamp.

Wiring diagram for connecting the rear camera's red wire to the reversing lamp's positive lead.

Image: Wiring diagram for reverse trigger connection.

Wire Layout in the Vehicle

  1. Plug the car charger into the mirror dash cam and connect it to the cigarette lighter.
  2. Attach the GPS module to the GPS port, remove its sticker, and place it on your car dashboard.
  3. Start your car's ignition and watch as the dashcam powers on automatically.
Diagram showing the recommended wire layout for the dash cam and rear camera in a vehicle.

Image: Diagram for in-vehicle wire layout.

Wiring Overview

Overall wiring diagram for the AZDOME PG17 Pro, showing connections for GPS module, SD card, Type-C charging cable, and rear camera.

Image: Overall wiring diagram for the dash cam system.

PLEASE NOTE:

We suggest mounting the rear camera on the license plate to minimize interference from any window films and to ensure clearer capture of rear-view details. This placement will enhance video quality and provide a better overall user experience.

3. Operating the Dash Cam

First Time Use

For a better user experience, please refer to the following steps for the first use:

  1. For the longevity of the machine, please use the car charger included in our package and ensure that the output power can reach 5V/3A. Unstable power supply or insufficient input current will cause the machine to automatically switch on or off or not turn on.
  2. Please insert the memory card in the correct direction. PLEASE NOTE: AZDOME PG17 Pro comes with an AZDOME 128GB memory card in the package. We recommend using a Class 10, U3, A2 Speed Micro-SD memory card. PG17 Pro dash cam supports memory cards of up to 256GB. Unqualified memory cards may cause the machine to restart repeatedly or incomplete recordings. Please format your memory card before first use to ensure better recording.
  3. After confirming that the power supply and rear camera are correctly connected and the memory card has been inserted into the machine, you can turn on the machine and use it. (Removing accessories during the startup process will cause the machine to shut down).
  4. Set the time zone: Go to Settings ⚙️ > Time Zone Settings > Select local time zone.

After completing the above settings, you can pre-set the dash cam according to your driving habits. AZDOME wishes you a smooth journey. If you encounter any problems during use, please contact us through the following methods: Email: service@azdomevip.com, Tel: 1-(833)6675545.

How to Format Micro-SD Card

A. Formatting the Memory Card by the Dash Cam:

  • Go to Settings ⚙️ > Format SD Card > Confirm.

B. Formatting the Memory Card by the AZDOME APP:

  1. Install the AZDOME App.
  2. Connect to the dash cam via Wi-Fi.
  3. Access the real-time preview page.
  4. Pause the recording, then tap the settings button in the upper right corner of the live preview page.
  5. In the settings menu, find the option to format the SD card. Select it and confirm the operation.
  6. Wait for the formatting to complete. You will hear a prompt indicating that the formatting is successful.

How to Connect AZDOME APP

  1. Search for the AZDOME App in the Google Play Store or Apple App Store and install it on your smartphone.
QR codes for downloading the AZDOME App from App Store and Google Play.

Image: QR codes for AZDOME App download.

  1. Turn on the WiFi of the dash cam: Settings > WiFi > 2.4G/5G. PLEASE NOTE: Some mobile phones do not support 5G WiFi. If you cannot find the WiFi of our dash cam in the WiFi list, please try to switch to 2.4G WiFi.
Phone screen showing WiFi settings and selecting the dash cam's WiFi network.

Image: Steps to connect to the dash cam's WiFi on a mobile phone.

  1. Please connect to our dash cam's WiFi on your mobile phone before opening the AZDOME APP. WiFi Name SSID: PG17 Pro_********** Default Password: 12345678
  2. After installing the AZDOME App, please register with your email on the registration screen to log in. If you are unable to receive the verification code, click “Skip Login” in the top right corner to enter the next page and click “Add Device”.
Phone screens showing the AZDOME App login page and the 'Add Device' screen.

Image: AZDOME App login and device addition process.

  1. Select your dash cam type.
Phone screen showing options to select dash cam type, with 'Mirror Dashcam' highlighted.

Image: Selecting the dash cam type in the AZDOME App.

  1. Select "Dashcam installed and powered on" and click "Next".
  2. Select "Wi-Fi connected" and click "Next".
Phone screens showing the 'Connect Dashcam Wi-Fi' prompt and the connected device in the AZDOME App.

Image: Connecting to the dash cam's Wi-Fi via the app.

  1. After selecting your model, you can set up the dash cam and view recorded videos through the APP.

How to View Video on Mobile Phone

  1. The Local album on the home page allows you to view locally downloaded videos.
  2. The Playback album for real-time preview allows you to view videos stored in the memory card (not saved on the user's phone).
Phone screens showing the AZDOME App's login/register page and the live video preview with map and recording options.

Image: AZDOME App interface for viewing videos.

  1. We have 2 ways to view videos:
  • Smart Timeline: You can find the videos you need more efficiently based on the date and video type.
  • Video List: You can select the videos you need to view through the preview interface.
Phone screens showing the Smart Timeline view and Video List view in the AZDOME App.

Image: Smart Timeline and Video List views in the AZDOME App.

How to View Video on Dash Cam

  1. Please click the playback icon to enter the playback mode.
Dash cam screen showing the user interface with a playback icon highlighted.

Image: Dash Cam UI in playback mode.

  1. Select the file you want to view:
  • Standard Video: Normally recorded video. When loop recording mode is turned on, the latest video will replace the oldest video when the memory card is full.
  • Locked Video: Video locked when the G-sensor senses a collision/Video locked manually by the user through voice control or touch. When loop recording mode is turned on, the locked video will not be replaced by the latest video when the memory card is full.
  • Photo: Photos taken by users through voice control or touch.
Dash cam screen showing a list of recorded video files.

Image: Dash Cam video file list.

  1. Click to view the video you want to view.

How to View Video on Computer

The GPS Player enables display of traveling track information when playing a video.

  1. Please remove the Micro SD Card from camera and connect the Micro SD Card to the computer via a card reader.
  2. Go to our website: https://www.azdomevip.com/pages/download-app to download the AZDOME Player (For Windows 32bits/64bits or macOS). You can also click on the "GPS_Player" file in our memory card directory to copy the download address. PLEASE NOTE: Please close or ignore the prompt of the anti-virus software, we confirm that it will not bring any security impact to your computer.
  3. After installation, there are two methods to play the video files.

Method 1:

Click File-Open icon 📁 to choose the folder which you want to play, click to start play. (Note that you CANNOT see any video files, please select a whole folder Normal or Event to play.)

Screenshot of the GPS Player interface on a computer, showing video playback and GPS data.

Image: GPS Player interface on a computer.

Method 2:

Select from “PC” and find the memory card disk, you should be able to see drive “D” or “E” or other name depending on the pre-installed hard drives. Once you find the added flash drive, double click in it, then you will see the file AZDOME folder.

Screenshot of a computer file explorer showing the AZDOME folder structure on an SD card.

Image: AZDOME folder structure on a computer.

  • Standard Video: Normally recorded video. When loop recording mode is turned on, the latest video will replace the oldest video when the memory card is full.
  • Locked Video: Video locked when the G-sensor senses a collision/Video locked manually by the user through voice control or touch. When loop recording mode is turned on, the locked video will not be replaced by the latest video when the memory card is full.
  • Photo: Photos taken by users through voice control or touch.

Choose one video file you want to play, you can drag and drop the file directly to the player. You can get the GPS information on the player.

4. Setting the Dash Cam

  • Resolution:
    Front and Rear: 4K 30FPS + 2.5K 30FPS (HDR) (Default), 2.5K 30FPS + 2.5K 30FPS (HDR), 1080P 30FPS + 2.5K 30FPS (HDR)
    Front: 4K 30FPS, 2.5K 30FPS, 1080P 30FPS
  • Loop Recording: 1 Min (Default)/2 Mins/3 Mins. Enables continuous recording, overwriting oldest files when the memory card is full.
  • Video Encoding: H.264 (Default)/H.265. H.264 offers better compatibility; H.265 offers higher compression efficiency and better video quality but requires more powerful equipment.
  • Audio: OFF/ON (Default). Choose to turn the microphone on or off during recording.
  • G-Sensor Sensitivity: OFF/Low/Middle (Default)/High. Adjust sensitivity based on driving conditions.
  • Timelapse Recording: Only enabled when connected to a Type C 3-lead hardwire kit (not visible with car charger).
  • Collision Boot Recording: OFF (Default)/Low/Middle/High. Sets G-sensor sensitivity for time-lapse recording.
  • Time-Lapse Recording Duration: OFF (Default)/12H/24H/48H.
  • Frequency: 50Hz/60Hz (Default). 50Hz for Europe, Asia, Africa; 60Hz for North America, South America, and some Asian countries.
  • Screensaver Mode: OFF (Default)/Turn Off Screen/Time Screensaver.
    • Turn On Screen: Displays real-time recorded image.
    • Turn Off Screen: Black screen, functions as a rearview mirror.
    • Time Screensaver: Displays time.

    NOTE: After 15s/1 Min/3 Mins of no operation, the screen turns off/only displays time, but the dash cam continues recording.

  • Touch Tone: OFF/ON (Default).
  • Volume: Default 90%.
  • Screen Brightness: Default 90%.
  • Display Mode: Show Front Camera/Show Rear Camera/Preview PIP (Left)/Preview PIP (Right)(Default).
  • Rear Camera Display: Vertical Flip/Mirror Flip (Default). Adjusts image direction based on rear camera installation.
  • Background: Grey (Default)/Blue/Pink/Green. Customizes menu interface background color.
  • Time Display: OFF/ON (Default).
  • Time Format: 12-Hour Clock/24-Hour Clock (Default).
  • Date Format: YY-MM-DD/DD-MM-YY/MM-DD-YY (Default).
  • Time Settings: Any time and date settings may be automatically overwritten when connecting to satellite data via GPS.
  • Reverse Mode: Full Screen (Default)/Full Frame. Prompts to enable reverse guidelines and connect rear camera's red wire to the vehicle's reverse-light circuit.
  • Fatigue Reminder: OFF (Default)/ON. Provides voice alerts after 2, 4, 6, and 8 hours of continuous driving.
  • Voice Control: OFF (Default)/ON. Keywords: "Turn on WiFi", "Turn off WiFi", "Take picture", "Lock the Video", "Turn on Audio", "Turn off Audio", "Turn on Screen", "Turn off Screen", "Show Front Camera", "Show Rear Camera".
  • ADAS (Advanced Driver Assistance Systems): Provides real-time collision warnings. Calibrate via icon. Features: Forward Collision Warning, Lane Departure Warning, Front Vehicle Start Warning.
  • Wi-Fi: OFF (Default)/2.4G/5G. Switch to 2.4G if 5G is not detected by your mobile phone.
  • Speed Units: KM/H, MPH (Default).
  • Time Zone Settings: UTC/GMT+1 to UTC/GMT+14 & UTC/GMT-1 to UTC/GMT-12, Default GMT-7.
  • GPS Info: Displays satellite Number, Speed, Longitude, Latitude.
  • GPS Display: OFF/ON (Default).
  • Watermark: OFF/ON (Default).
  • Language: English (Default)/Simplified Chinese/French/Japanese/Spanish/German/Italian/Traditional Chinese/Korean/Turkish/Portuguese/Arabic.
  • Format Reminder: OFF/Each 15 Days/Each 30 Days (Default)/Each 60 Days.
  • Format SD Card: Cancel/Confirm. Erases all data on the memory card.
  • Factory Reset: Cancel/Confirm. Resets settings but does NOT erase data on the memory card.
  • About: Displays Model (PG17 Pro), Website (www.azdomevip.com), Email (service@azdomevip.com), Tel (1-(833)6675545), Youtube (https://www.youtube.com/azdome), Instagram (https://www.instagram.com/azdome_official/).

5. Specifications

AttributeValue
ModelPG17 Pro
Screen Size12 Inch Touch Screen
ApertureF=1.8
ColorBlack
LanguageEnglish (Default), Simplified Chinese, French, Japanese, Spanish, German, Italian, Traditional Chinese, Korean, Turkish, Portuguese, Arabic
Video FormatMP4
Photo FormatJPG
Video CodeH.264/H.265
Video ResolutionFront and Rear: 4K 30FPS + 2.5K 30FPS (HDR) (Default), 2.5K 30FPS + 2.5K 30FPS (HDR), 1080P 30FPS + 2.5K 30FPS (HDR)
Front: 4K 30FPS, 2.5K 30FPS, 1080P 30FPS
G-sensorBuilt-in 3-Axis Acceleration Sensor
Loop RecordingSupport
Parking ModeSupport (ONLY works when connected to 3-Lead Hardwire Kit)
MemoryMax support 256GB (Class 10, U3 Speed)
MicrophoneBuilt-in
SpeakerBuilt-in
Power Interface5V/3A
Working Temperature-20℃ to 70℃ (-4℉ to 158℉)

6. Maintenance

How to Update Firmware

When the camera doesn't respond to your operation and resetting doesn't help, it's useful to update to the latest firmware. Please follow these steps to update the firmware:

  1. Format Micro-SD Card: You can do this by going into the camera's system settings. PLEASE NOTE: Make sure to backup your recordings if you need them before formatting the Micro-SD Card.
  2. Insert the card into the Micro SD Card reader and connect it to a computer.
Diagram showing how to connect an SD card via an adapter to a computer for firmware update.

Image: SD Card to Computer connection for firmware update.

  1. According to the original firmware version in your dash cam, choose the correct firmware to download it from AZDOME official website: https://www.azdomevip.com > Support > Download > AZDOME Firmware > PG17 Pro Firmware.
  2. Please unzip the firmware package and cut all the files in the folder to the root directory of the memory card. After inserting the memory card and turning on the power, the dash cam will start to upgrade the new firmware.

7. Troubleshooting

  • Camera turns ON/OFF automatically?
    Ensure that the output current can reach 5V/3A and use our car charger. Also, ensure that the rear camera is connected correctly. The dashcam reboots automatically if it detects different cameras connected to improve stability.
  • The power is on, but the device cannot be turned on?
    If the Mirror dash cam does not function normally, try restarting it. To restart, use a flattened paper clip to press the small “Reset” hole on top of the device next to the USB port.
  • Video does not play smoothly?
    You may be viewing a high-bit rate version of video files. General computer configurations might have problems with faster data processing. Try recording videos at a lower resolution. If the problem persists, contact service@azdomevip.com.
  • Device fails to record video or take a picture?
    Plug in the card. If the card is not recognized, unplug it and plug it in again, or clean any contamination from the card contacts. If not solved, format the memory card in the dash cam.
  • All buttons fail to function?
    Press the Reset Key to restart the device. If not solved, remove the memory card or rear camera to confirm if the accessories are causing the issue.
  • Why is the rear cam image converse on the screen?
    According to your preference, set the function named “Rear Video Mirror" to OFF.
  • Why can't the dash cam get the GPS signal?
    Check if the GPS icon status is displayed on the screen (it takes 1-3 minutes to get a GPS signal successfully). GPS signals can be blocked by strong radio interference from other electronic devices in the car, cloudy/rainy weather, mountains, tunnels, or tall buildings. Test the GPS module outside the car; if it works, there might be heavy interference inside the car (e.g., thick car explosion-proof membrane, metal items).
  • Time display is incorrect after setting?
    Ensure you choose the correct time zone when the GPS antenna is connected. Time Zone settings are applied upon receiving a GPS connection. Adjust for standard vs. daylight savings time. If unsure of your GMT offset, look up your city on www.greenwichmeantime.com/time-zone/usa/.
  • Dash cam feels warm?
    It is normal for a dash cam of this caliber to be warm. High-quality video recording requires significant processing power, and heat is a byproduct. The dash cam's casing acts as a heat-sink. This is normal, and your AZDOME is operating as designed.
  • Video has no sound?
    Ensure that the “Audio Recording” setting is turned ON. Ensure that the “TimeLapse Parking Mode” setting is turned OFF within the Menu.

8. Important Safety Information

  • Please read this manual carefully before operation and keep it for future reference.
  • Please only use the AZDOME car charger included in this package.
  • Be sure to format your microSD card with your dashcam for the first time use. Periodically reformat the memory card (every 2-3 weeks). Download any files you want to keep before formatting.
  • Do not remove or insert the memory card when the Stream Media Mirror Dash Camera is turned on, as this may damage the memory card.
  • Do not remove or insert the GPS module or rear camera when the Stream Media Mirror Dash Camera is turned on, as this may damage the camera.
  • The camera is designed to power up and record automatically when it receives power, then saves the video record and turns off automatically when the car shuts off.
  • Please MAKE SURE to connect all cameras and wires BEFORE powering ON the Mirror Screen, otherwise, the camera cannot work properly.
  • Improper installation will void the manufacturer's warranty. The installation instructions are guidelines and may not apply to all vehicle types. Consult an experienced technician if uncomfortable with installation.
  • Do not expose this product to rain, moisture, or water to avoid electric shock or fire.
  • Do not obscure the view of the road ahead or impede airbag deployment.
  • Clean the device with a soft dry cloth. For tough dirt, use a neutral detergent diluted in 5 to 6 parts water on a soft cloth. Avoid alcohol, thinner, or benzene as they can damage paint or coatings.
  • Avoid contact with the lens to prevent damage. Clean glass lenses carefully with spectacle lens cleaning fluid on a soft cloth.
  • Video recordings are for personal use only.
  • Do not adjust device controls while driving to avoid distraction.

9. Compliance and Security

CE Compliance: This product complies with the radio interface requirements of the European Community.

WEEE Directive: This symbol indicates that the product must not be discarded as household waste. It should be delivered to an appropriate recycling facility to protect natural resources, human health, and the environment. Contact your local municipality or disposal service for more information.

FCC Compliance: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, try the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

10. User Tips

  • Always format your SD card for the first time with your dash cam, and reformat it monthly for optimal performance.
  • Avoid using "SanDisk Ultra" or "Generic Class 10 for HD Video" cards from third-party sellers, as they may not be suitable for this high-end 4K dash cam.
  • The dash cam uses a built-in supercapacitor (with a small lithium metal battery for timekeeping). Always connect it to an external power source (USB hardwire kit not included) during use.
  • AZDOME regularly provides free updates for camera firmware, software, and iOS & Android app improvements to enhance your experience.

11. Warranty & Support

The AZDOME PG17 Pro Dash Cam comes with a 1-year warranty.

For any support inquiries, please contact AZDOME customer service:

You can also find more information and updates on their social media channels:

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.