1. Product Overview
The Tuya Smart WiFi/Zigbee Garage Door Opener Switch Module allows you to remotely control your garage door using the Tuya or Smart Life mobile application, and integrate with voice assistants like Amazon Alexa and Google Home. This module comes in two versions: a Wi-Fi version (QS-WIFI-S10-C03) and a Zigbee 3.0 version (QS-Zigbee-S10-C03).

2. Technical Specifications
Below are the technical specifications for both the Wi-Fi and Zigbee versions of the module.

| Parameter | Wi-Fi Version (QS-WIFI-S10-C03) | Zigbee Version (QS-Zigbee-S10-C03) |
|---|---|---|
| Product Type | Mini Gate Opener Module | |
| Material | ABS+PC | |
| Input Voltage | 100-240V AC, 50/60Hz | |
| Output | No | |
| Operation Frequency | 2.4GHz-2.4835GHz (Wi-Fi) | 2.4GHz-2.484GHz (Zigbee) |
| Protocol | WIFI IEEE 802.11 b/g/n | Zigbee 3.0, IEEE802.15.4 |
| Operation Temperature | -10°C to +40°C | |
| Case Temperature (Max) | Tc: +80°C | |
| Operation Range | ≤ 200 m | |
| Dimensions (WxDxH) | 39.2 x 39.2 x 18 mm | |
| IP Rating | IP20 | |
| Certification | CE, RoHS | |
Module Dimensions: The module measures 39.2mm x 39.2mm x 18mm (WxDxH) and includes a mounting clip for installation.

3. Safety Warnings and Important Notes
3.1. Warnings
- Installation must be carried out by a qualified electrician in accordance with local regulations.
- Keep the device out of reach of children.
- Keep the device away from water, damp, or hot environments.
- Install the device away from strong signal sources such as microwave ovens that may cause signal interruption, leading to abnormal operation.
- Obstruction by concrete walls or metallic materials may reduce the effective operation range of the device and should be avoided.
- Do NOT attempt to disassemble, repair, or modify the device.
- Install an air circuit breaker in front of the switch module.
3.2. Important Notes
- Connect the module with Tuya or Smart Life APP by 2.4G Wi-Fi first. Press the button on top of the module several times to get pairing.
- If you buy a Zigbee module, you will need a Tuya Zigbee 3.0 Gateway or hub if your Alexa/Google/Yandex speaker does not have Zigbee function. Without Wi-Fi or Zigbee signal in your garage, you may need a Wi-Fi or Zigbee repeater to increase the signal.
- Please ensure that there is an external switch with your garage door, otherwise the switch module cannot be installed. If the garage door can be controlled by an external switch and controller, you can also install the module.
- The smart garage door module cannot be paused in the APP.
- Please calibrate the garage door module at first. Choose a suitable time for opening/closing.
4. Installation Method
4.1. Wiring Instructions and Diagrams
- Turn off the power supply before carrying out any electrical installation work.
- Connect wires according to the wiring diagram provided below.
- Insert the module into the junction box.
- Turn on the power supply and follow the switch module configuration instructions.
Note: Take your smartphone close to the switch module when you're configuring, and make sure you have a minimum of 50% Wi-Fi signal (for Wi-Fi version).

4.2. App User Manual (Tuya Smart App)
The Tuya Smart App is used for both Wi-Fi and Zigbee versions. For the Zigbee version, a Zigbee gateway is required.
4.2.1. Download and Register
Scan the QR code below or search for "Tuya Smart" in the App Store (iOS) or Google Play (Android) to download the app.

Register or log in to your account using your mobile number or email address. Follow the prompts to create a family/home in the app.
4.2.2. Pairing the Wi-Fi Module (QS-WIFI-S10-C03)
- After wiring, long press the reset key on the module for about 10 seconds until the indicator light flashes quickly. This indicates pairing mode.
- Open the Tuya Smart App. Ensure your smartphone and the Wi-Fi Switch are under the same 2.4GHz Wi-Fi network.
- The app may automatically detect the device. If not, tap '+' in the top right corner, then 'Add Manually' or 'Auto Scan'. Select the appropriate device type (e.g., 'Electrical' -> 'Socket (Wi-Fi)' or 'Gate Opener Module').
- Enter your Wi-Fi network password and confirm.
- The pairing process will begin. Keep your mobile phone and device as close as possible.
- Once pairing is complete, the Wi-Fi gate opener will appear in the app.
4.2.3. Pairing the Zigbee Module (QS-Zigbee-S10-C03)
- Ensure your Zigbee Gateway is added and installed to your Wi-Fi network and is within range of the Zigbee module.
- Open the Tuya Smart App and navigate to the control panel of your Zigbee gateway.
- After wiring, long press the reset key on the Zigbee module for about 5 seconds until the indicator light flashes quickly. This indicates pairing mode.
- In the Zigbee gateway control panel, tap '+' (Add sub-device) and follow the on-screen instructions for pairing.
- The connection process may take 10-120 seconds depending on network conditions.
- Once pairing is complete, the Zigbee gate opener will appear in the app.
5. Operation
5.1. APP Remote Control
Control your garage door remotely from anywhere at any time using the Tuya Smart or Smart Life App. The app will display the current status (Opened/Closed).

5.2. Voice Control
Integrate the module with Amazon Alexa or Google Assistant for convenient voice control. Use simple commands to open or close your garage door.
- Example commands: "Alexa, Turn off the garage door." or "OK Google, Turn on the garage door."

5.3. Timer Schedule
Create custom schedules within the app to automatically open or close your garage door at specific times, such as daily routines or one-time events.

5.4. Timeout Alarm
Set a timeout alarm to receive real-time notifications if your garage door remains open for a specified duration, enhancing security.

5.5. Group Function
Control multiple garage door modules simultaneously by creating groups within the app. This allows for synchronized operation of several devices.

5.6. History Record
View a history record in the app to check when your garage door was opened or closed, providing an activity log for monitoring.

5.7. Share Function
Share control of the smart garage door opener module with family members, allowing multiple users to manage the garage door from their own devices.

5.8. Manual Override
The switch module terminal reserves access for a manual override function, allowing the end-user to switch the garage door on/off physically. The app control is synchronized with the manual switch, and the last adjustment remains in memory.
6. Troubleshooting (FAQ)
- Q1: What should I do if I can't configure the switch module?
- Check if the device is powered on.
- Ensure your mobile and switch module are under the same 2.4 GHz Wi-Fi network.
- Verify good internet conditions.
- Make sure the password entered in the App is correct.
- Ensure the wiring is correct.
- Q2: What devices can be connected to this switch module?
- This module is designed for Gate Openers and Garage Doors.
- Q3: What happens if the Wi-Fi goes off?
- You can still control the device connected to the switch module with your traditional manual switch. Once Wi-Fi is active again, the device will automatically reconnect to your Wi-Fi network.
- Q4: What should I do if I change the Wi-Fi network or change the password?
- You will need to re-connect your Wi-Fi switch module to the new Wi-Fi network accordingly, following the App User Manual's pairing instructions.
- Q5: How do I reset the device?
- For Wi-Fi version: Long press the reset key for about 10 seconds until the indicator light flashes quickly.
- For Zigbee version: Long press the reset key for about 5 seconds until the indicator light flashes quickly.
7. Maintenance
To ensure optimal performance and longevity of your module:
- Keep the module in a dry environment, away from water and excessive humidity.
- Avoid exposing the device to extreme temperatures.
- Regularly check wiring connections for any signs of wear or damage.
- Do not attempt to clean the internal components. Wipe the exterior with a dry, soft cloth if necessary.
8. User Tips
- Signal Strength: For reliable operation, especially in garages, consider using a Wi-Fi or Zigbee repeater if the signal from your router or gateway is weak.
- Calibration: Always calibrate the garage door module initially by choosing a suitable time for opening/closing within the app. This ensures accurate operation.
- External Switch: Confirm your garage door has an existing external switch. The smart module requires this for proper installation and functionality.
- App Synchronization: Remember that both app control and manual switch operations are synchronized. The last action taken (either via app or manual switch) will be the current state.
9. Warranty and Support
This product comes with a 1-year warranty from the date of purchase, covering manufacturing defects. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer's customer service.
For a more detailed user manual, you may refer to the official PDF document: User Manual (PDF)