1. Safety Information
WARNING:
- Please mind potential fire risk and strictly follow the instruction manual for charging and storage.
- While using the product, please wear protective equipment and fully comply with the applicable law and regulations.
- The scooter will power off when the NFC card is near the NFC sensing area, which is dangerous during riding!
- Before folding or any servicing, turn off the scooter first!
This appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure they do not play with the appliance.
For the full text of the EU Declaration of Conformity, visit the link: https://www.iscooterglobal.de/pages/konformitatserklarung (EU) and https://www.iscooterglobal.co.uk/pages/declaration-of-conformity (UK).
2. Package Contents
The iScooter GX3Pro package includes the following items:
Main Unit
1 x iScooter GX3Pro Electric Scooter
Accessories
Headlight Kit
Toolkit
NFC Key Cards (2 included)
User Manual (this document)
Charger (54.6V 2A with EU Plug)
3. Product Overview
Familiarize yourself with the components of your iScooter GX3Pro.
Image: Diagram showing the main parts of the iScooter GX3Pro Electric Scooter.
- Display
- Control Pad
- Brake Lever
- Throttle
- Handlebar Folding Sleeves
- Fender Hook
- Handlebar Height Adjustment Clamp
- Folding Mechanism
- Headlight
- Disc Brake Rotor
- Atmosphere Light
- Kickstand
- Charging Port
- Fender Latch
- Turn Signals
- 2-in-1 Taillight & Brake Light
4. Assembly
4.1. Unfolding the Scooter
Follow these steps to unfold your scooter:
-
Ensure the folding mechanism is locked securely. (Refer to image for step 1)
Image: Close-up of the folding mechanism, showing the latch in a locked position.
-
Lift the two ends of the handlebar to the horizontal positions until they snap onto the threads. (Refer to image for step 5)
Image: Diagram showing how to lift the handlebar ends into position.
-
Turn the folding sleeves as shown to lock the two ends of the handlebar. (Refer to image for step 6)
Image: Diagram illustrating how to turn the folding sleeves to secure the handlebar.
WARNING: Ensure the two ends of the handlebar are locked securely.
4.2. Attaching the Headlight
Attach the headlight to the front of the scooter as shown in the diagram.
Image: Diagram showing the headlight being attached to the scooter's front stem.
WARNING: Before folding or any servicing, turn off the scooter first!
4.3. Adjusting Handlebar Height and Controls
-
Open the lever of the height adjustment clamp, adjust the handlebar to your desired height, then fully close the lever of the clamp.
Image: Diagram showing the handlebar height adjustment clamp and lever.
-
Adjust the display, control pad, throttle, and brake levers to your desired angles, then tighten their bolts securely.
Image: Diagram showing the adjustment points for the display, control pad, throttle, and brake levers.
WARNING: After closing the lever of the handlebar adjustment clamp, ensure the clamp is securely tightened.
5. Folding the Scooter
To fold the scooter for storage or transport:
Image: Diagram illustrating the steps to fold the scooter, showing the release of the folding mechanism and securing the handlebar to the fender hook.
- Release the folding mechanism (indicated by '1' and '2' in the diagram).
- Fold the stem downwards (indicated by '3').
- Secure the handlebar to the fender hook (indicated by '4').
The electric scooter collapses for easy storage in car trunks and other compact spaces.
Image: A folded iScooter GX3Pro stored in a car trunk.
6. Basic Operations
6.1. Display Overview
Image: Close-up of the smart LED display showing various indicators and controls.
- Turn Signal
- Brake Applied
- Scooter Locked
- Headlight on
- App Connected
- Cruise Control
- Riding Mode
- ODO: Total Distance / TRIP: Trip Distance
- Battery Level & Voltage
- Real-time Speed / Error Code
- MAX: Trip Maximum Speed. AVG: Trip Average Speed.
Note:
- ODO and Trip will display alternately after the scooter is powered on.
- MAX and AVG speed will also display alternately.
6.2. Control Pad Functions
Image: Diagram of the control pad with labeled buttons.
- Power Button: Hold for 2 seconds to turn on/off the scooter.
- Select Riding Mode: Press to switch the riding mode (ECO, STD, SPORT, TURBO).
- M Button: Hold the "M" button for about 3 seconds to enter the settings.
- Headlight Switch: When the scooter is powered on, press to turn on/off the headlight, taillight, and atmosphere light.
- Turn Signal Switch:
- Toggle to the left/right to turn on the left/right turn signal respectively.
- Toggle to the middle to turn off the left/right turn signal.
- Horn Button: Press or hold to sound the horn.
7. Unlocking the Scooter
After powering on, the scooter is locked. There are two ways to unlock it:
7.1. Password Unlock (000)
After powering on the scooter, the first "0" of the password will flash. Then:
- Press the Power button to enter the second "0".
- Press it again to enter the third "0".
- Quickly double-press the Power button to unlock the scooter.
7.2. NFC Key Card Unlock
Put the NFC key card against the NFC sensing area on the back of the display to unlock the scooter.
Image: Hand holding an NFC key card near the scooter's display for unlocking.
WARNING: The scooter will power off when the NFC card is near the NFC sensing area, which is dangerous during riding!
8. Settings
After entering the settings (by holding the "M" button for 3 seconds), press the "M" button to switch between setting items: P01, P05, P06, P99, and ODO.
- P01 (Metric or Imperial Unit): Press the "+" or "-" button to cycle through MPH and Km/h. (MPH for imperial, Km/h for metric).
- P05 (Cruise Control): Press the "+" or "-" button to select between 00 (off) and 01 (on).
- * After cruise control is turned on, the icon will flash on the main screen.
- P06 (Start Mode): Press the "+" or "-" button to select between 00 (zero start) and 01 (non-zero start).
- P99 (Factory Reset): Press and hold the "+" button for 5 seconds to factory reset the scooter.
- ODO (Odometer Reset): Press and hold the "+" button for 5 seconds to reset the odometer (total distance).
8.1. Speed Cracking (Unlockable Boost)
The scooter has unlockable speed modes. To activate the higher speed settings:
- After powering on, briefly press the 'M' button five times in a row. This indicates successful setting.
- Standard speeds: 6km/h, 10km/h, 15km/h, 25km/h.
- Unlockable speeds: 20km/h, 30km/h, 40km/h, 50km/h.
WARNING: Always ride responsibly and comply with local laws and regulations regarding electric scooter speed limits.
9. Charging
- The scooter is fully charged when the charger indicator changes from red to green.
- With charging protection, the scooter will cut off charging automatically after a full charge. However, overcharging is not recommended.
- Keep the charging port cover closed when not charging.
- During charging, the scooter cannot be turned on.
- Charging Time: 7-8 hours.
Suggestion: Please fully charge the battery after receiving the scooter. It is recommended to charge the scooter regularly (once a week) to improve the stability and life of the battery.
10. Maintenance
10.1. Disc Brake Adjustment
To adjust the brake cable:
- You need a hex wrench to loosen the bolt on the cable clamp.
- If the disc brake is dragging, slide the arm of the clamp backward along the cable while holding the cable in one hand. Then, retighten the bolt on the brake clamp.
- If the disc brake does not work efficiently (cable is slack), slide the arm of the clamp forward along the cable while holding the cable in one hand. Then, retighten the bolt on the brake cable clamp.
Image: Diagram showing the disc brake caliper and the adjustment bolt for the brake cable.
10.2. Eliminating Brake Noise
- Loosen the two brake caliper mounting bolts (not the bolt on the cable clamp).
- Reposition the brake caliper to ensure the brake rotor is centered between the brake pads.
- Retighten the mounting bolts.
11. Specifications
Image: Table summarizing the key specifications of the GX3Pro Electric Scooter.
| Feature | Specification |
|---|---|
| Model | GX3Pro |
| Max. Motor Power | 1500 W |
| Rated Motor Power | 1200 W |
| Range Per Charge | 55-60 km (30-38 miles)* |
| Max Speed | 50 km/h (unlocked) / <25 km/h (standard) |
| Battery Capacity | 48V 17.5Ah |
| Charging Time | 7-8 hours |
| Tire Size | 11 inch Off-Road Tubeless Tires |
| Weight | 27.1 kg (59.7 lbs) |
| Max. Load Capacity | 150 kg (330 lbs)* |
| Operating Temperature | -2 to 35 °C |
| Dimensions (unfolded) | 117 x 63.5 x 120 cm (46.06 x 25 x 47.24 in) |
| Dimensions (folded) | 117 x 63.5 x 58 cm (46.06 x 25 x 22.83 in) |
| Braking | Front & Rear Dual Disc Brakes |
| Suspension | Front & Rear Double Shock Absorbers (Four-Spring Suspension) |
| Waterproof Rating | IPX4 |
| APP | iScooter Club APP |
| Extras | NFC start system |
| Certification | CE |
| Recommended Age | 14+ |
* About the Range: Measured in a laboratory under 100% battery level condition. The range will differ depending on different factors, such as load, humidity, wind speed, and operation habits.
* The structure of this scooter is designed to support a maximum load of 330 lbs (150 kg). For the best riding experience, 70% of the maximum load is recommended.
Image: Diagram showing the unfolded and folded dimensions of the scooter.
12. Troubleshooting
This section addresses common issues you might encounter with your iScooter GX3Pro.
- Scooter not turning on: Ensure the battery is charged. Hold the power button for 2 seconds.
- Scooter not unlocking: Try both password (000) and NFC key card methods. Ensure the NFC card is placed correctly on the sensing area.
- Brake dragging or inefficient: Refer to the "Disc Brake Adjustment" section in Maintenance.
- Brake noise: Refer to the "Eliminating Brake Noise" section in Maintenance.
- Range shorter than expected: Range is affected by load, humidity, wind speed, and riding habits. Ensure the battery is fully charged.
- Speed discrepancy: The display speed might differ slightly from GPS readings. Ensure you are aware of local speed regulations.
- App connectivity issues: Ensure Bluetooth is enabled on your device and the scooter is powered on.
If you experience persistent issues, please contact customer support.
13. User Tips
- Battery Care: Fully charge the battery upon receiving the scooter. Regularly charge the scooter (once a week) to improve battery stability and lifespan.
- Speed Management: Be aware that the displayed speed might be slightly higher than actual GPS speed. Always adhere to local speed limits.
- Off-Road Performance: The 11-inch off-road tubeless tires and full suspension are designed for various terrains, including urban roads, gravel, speed bumps, and grass.
- Safety First: Always wear protective gear and be mindful of your surroundings, especially given the scooter's powerful motor and potential for high speeds.
- Customer Service: If you encounter any issues, responsive customer service is available to help.
- Tire Choice: While the off-road tires are versatile, some users might prefer road tires for purely urban commuting.
14. Warranty & Support
The iScooter GX3Pro comes with a one-year warranty from the purchase date.
- Within 1 month of purchase: Free repair, shipping costs covered by the seller.
- After 1 month, before 3 months: Free repair, shipping costs covered by the buyer.
- After 3 months: Free repair, but buyer pays for components and shipping costs.
Repair shops are available in Germany, UK, and Spain.
For any questions or maintenance service, please contact customer service. You can also install the "iScooter Club" App for a digital manual, step-by-step setup videos, FAQs & troubleshooting, and electronic lock features.
Image: QR code to install the "iScooter Club" App.
Manufacturer: Shenzhen Xincheng Times Technology Co.,Ltd
E-mail: support@iscooterglobal.eu
EC REP (European Representative): GAVIMOSA CONSULTORIA, SOCIEDAD LIMITADA
E-mail: compliance.gavimosa@outlook.com
15. Compliance
15.1. FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
15.2. RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition, compliance with exposure requirements.
15.3. Disposal of Electrical and Electronic Equipment
The crossed-out garbage can symbol means that you are legally obliged to dispose of these devices separately from unsorted municipal waste. Disposal via the residual waste bin or the yellow bin is prohibited. If the products contain batteries or rechargeable batteries that are not permanently installed, they must be removed before disposal and disposed of separately as a battery.
15.4. CE Warning
This appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure they do not play with the appliance.
Note: This scooter is not certified by German AEB. Please consider carefully before placing an order. Returns based on this certification will not be accepted.