1. Introduction
Thank you for choosing the SUMRY Hybrid Solar Inverter. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your 3.6KW or 4KW hybrid solar inverter. This device is designed to convert reliable, clean, and quiet AC energy to supply your off-grid living and provide sustainable power solutions for your home or business. It features a pure sine wave output, an advanced MPPT solar charge controller, and various protection modes to ensure stable and safe operation.

Figure 1: SUMRY HGX(110V) Series / MPS-VIII ECO Series Hybrid Solar Inverter
2. Safety Information
Please read and understand all instructions and warnings before installing, operating, or servicing this inverter. Failure to follow these instructions may result in electric shock, fire, severe injury, or death.
General Safety Precautions:
- Installation and wiring must be performed by qualified personnel in accordance with all applicable electrical codes.
- Ensure the inverter is properly grounded.
- Do not disassemble the inverter. There are no user-serviceable parts inside.
- Keep the inverter away from flammable materials, moisture, and direct sunlight.
- Ensure adequate ventilation around the inverter to prevent overheating.
- Always disconnect all power sources (AC, PV, and battery) before performing any maintenance or wiring.
- Wear appropriate personal protective equipment (PPE) during installation and maintenance.
3. Product Overview
The SUMRY Hybrid Solar Inverter is a versatile power solution designed for both on-grid and off-grid applications. It integrates a pure sine wave inverter, an MPPT solar charge controller, and a battery charger into one compact unit. This inverter is capable of powering a wide range of household and commercial appliances.
Key Features:
- Pure sine wave output for compatibility with sensitive electronics.
- High efficiency MPPT solar charge controller (up to 140A, Max PV 5600W).
- Supports various battery types including Lithium, GEL, AGM, and Flooded.
- Battery-less operation capability (can power loads directly from PV array).
- Configurable AC/Battery input priority via LCD setting.
- Multiple working modes: Solar First, Solar and Utility, Only Solar, Electricity Utility Priority, Solar Priority, Hybrid Charging.
- Comprehensive protection system: Overload, Short Circuit, Battery, Overheating, Overcurrent, High/Low Voltage, Anti-Reverse, Energy Fallout.
- Built-in intelligent cooling fan.
- Optional WiFi module for remote monitoring (module shipped separately from China).
- AC output voltage: 110-120VAC, 50/60Hz.
Unboxing and Initial Inspection:
Watch this video for a visual guide on unboxing and initial connections of the SUMRY Hybrid Solar Inverter.
Video 1: SUMRY Hybrid Solar Inverter Unboxing and Basic Connection

Figure 2: SUMRY Hybrid Solar Inverter with optional WiFi module for remote monitoring.
4. Specifications
Below are the detailed technical specifications for the SUMRY ECO LV 3.6KW and HGX 4KW Hybrid Solar Inverters.
4.1. ECO LV 3.6KW Model Specifications
| Parameter | VICTOR NM-ECO-LV-3.6KW PLUS |
|---|---|
| Phase | 1-phase |
| OUTPUT | |
| Rated Power | 3600W/3800VA (3000/3150/3300) |
| Maximum PV Power Charger Current | 120A |
| GRID-TIE OPERATION | |
| PV INPUT(DC) | |
| Nominal DC Voltage/Maximum DC Voltage | 360/500VDC |
| Start-up Voltage / Initial Feeding Voltage | 90VDC/120VDC |
| MPPT Voltage Range | 60-450VDC |
| GRID OUTPUT(AC) | |
| Nominal Output Voltage | 120VAC (100/105/115V settable) |
| Nominal Output Current | 30A |
| Power Factor | >0.99 |
| EFFICIENCY | |
| Maximum Conversion Efficiency (DC/AC) | 98% |
| TWO LOAD OUTPUT POWER | |
| Full Load | 3600W |
| Maximum Main Load | 3600W |
| Maximum Second Load (battery mode) | 1200W |
| Maximum Load Off-Grid Voltage | 24VDC |
| Minimum Load Return Voltage | 27VDC |
| OFF-GRID OPERATION | |
| AC INPUT | |
| AC Start-up Voltage/Auto Restart Voltage | 110VAC/120VAC |
| Acceptable Input Voltage Range | 90-150VAC ±2% |
| Frequency Range | 48-51Hz |
| Maximum AC Input Current | 40A |
| PV INPUT(DC) | |
| Nominal DC Voltage/Maximum DC Voltage | 360/500VDC |
| MPPT Voltage Range | 60-450VDC |
| BATTERY & CHARGER | |
| Nominal DC Voltage | 24VDC |
| Maximum Solar Charging Current | 100A |
| Maximum AC Charging Current | 100A |
| Maximum Solar+AC Charging Current | 120A |
| HYBRID OPERATION | |
| PV INPUT(DC) | |
| Nominal DC Voltage/Maximum DC Voltage | 360/500VDC |
| Start-up Voltage / Initial Feeding Voltage | 90VDC/120VDC |
| MPPT Voltage Range | 60-450VDC |
| GRID OUTPUT(AC) | |
| Nominal Output Voltage | 120VAC (100/105/115V settable) |
| Nominal Output Current | 30A |
| AC INPUT | |
| AC Start-up Voltage/Auto Restart Voltage | 120-140VAC/108VAC |
| Acceptable Input Voltage Range | 90-150VAC |
| Maximum AC Input Current | 40A |
| GENERAL | |
| Physical Dimension (H*W*D) (mm) | 420*350*110 |
| Net Weight (kgs) | 8.8 |
| INTERFACE | |
| Communication Port | RS232/RS485/WIFI/GPRS/LITHIUM BATTERY |
| OPERATING ENVIRONMENT | |
| Humidity | 5% to 95% Relative Humidity (Non-condensing) |
| Operating Temperature | -15°C~50°C |
| STANDARD | |
| Compliance Safety | CE |
4.2. HGX 4KW Model Specifications
| Parameter | HGX (110V) 4KW |
|---|---|
| RATED POWER | 4000W |
| INPUT | |
| Voltage | 100/110/120VAC |
| Selectable Voltage Range | 90-140VAC |
| Frequency Range | 50Hz/60Hz (Autosensing) |
| OUTPUT | |
| AC Voltage Regulation | 120VAC ±5% |
| Surge power | 2* rated power for 5 seconds |
| Efficiency (Peak) PV to INV | 97% |
| Efficiency (Peak) BAT to INV | 94% |
| Transfer Time | 10ms (for personal computers), 20ms (for home appliances) |
| Wave form | Pure Sine Wave |
| BATTERY & AC CHARGER | |
| Battery Voltage | 24VDC |
| Bulk Charging Voltage | Flooded Battery: 29.2VDC, AGM/GEL Battery: 28.2VDC |
| Floating Charge Voltage | 27.6VDC |
| Overcharge Protection | 32VDC |
| Maximum charge current | 110A |
| SOLAR CHARGER | |
| PV INPUT(DC) | |
| Nominal DC Voltage/Maximum DC Voltage | 280VDC/350VDC |
| Start-up Voltage/Initial Feeding Voltage | 55Vdc |
| MPPT Voltage Range | 55Vdc-280Vdc |
| GRID OUTPUT(AC) | |
| Nominal Output Voltage | 120Vac |
| Output Voltage Range | 95V-135V |
| Nominal Output Current | 33A |
| EFFICIENCY | |
| Maximum Conversion Efficiency (DC/AC) | 98% |
| MPPT Efficiency | 99.90% |
| PHYSICAL | |
| Communication Interface | COM port (Standard), LCD remote/WiFi (Optional) |
5. Installation
Proper installation is crucial for the safe and optimal performance of your SUMRY Hybrid Solar Inverter. It is highly recommended that installation be performed by a certified electrician or qualified solar professional.
5.1. Mounting Location
- Choose a cool, dry, and well-ventilated area.
- Avoid direct sunlight, high temperatures, and excessive humidity.
- Ensure sufficient clearance around the inverter for proper airflow and cooling.
- Mount the inverter vertically on a sturdy surface.
5.2. Wiring Connections
Refer to the wiring diagram below for correct connections. Always ensure all power sources are disconnected before making any connections.

Figure 3: Wiring and Technical Specifications Diagram for the Hybrid Solar Inverter.

Figure 4: Rear panel connections showing PV input, AC input, AC output, Battery input, and RS458/RS232 communication port.
Recommended Circuit Breakers:
Before installing and using the inverter, it is recommended to install 4 circuit breakers in the following positions:
- Between the battery pack and the inverter battery input.
- Between the solar panel and the photovoltaic input of the inverter.
- Between the power input of the grid and the inverter.
- Between inverter output and load.
The circuit breaker is to effectively prevent misconnection or reverse connection of the mains input and the inverter output. When there is a short circuit, load short circuit, or overload in the output, the circuit breaker can directly cut off the circuit to protect the inverter.

Figure 5: Diagram illustrating recommended circuit breaker placement for inverter protection.
6. Operation
The SUMRY Hybrid Solar Inverter offers flexible operation modes to suit various power needs and scenarios.
6.1. Working Modes
The inverter supports four primary working modes:
- **Solar Charging:** Prioritizes solar power for charging batteries and powering loads.
- **Electricity Utility Priority:** Prioritizes utility grid power, using solar and battery as backup.
- **Solar Priority:** Prioritizes solar power for loads, using utility or battery as backup.
- **Hybrid Charging:** Combines solar and utility power for charging and loads.

Figure 6: Illustration of the four working modes: Solar Charging, Electricity Utility Priority, Solar Priority, and Hybrid Charging.
6.2. Battery Compatibility
The inverter is compatible with most common 24V battery types, including GEL, Lithium (Li), AGM, and Flooded (FLD) batteries. It also features automatic activation for Lithium batteries.

Figure 7: Inverter compatible with 24V GEL, FLD, LI, and USER battery types.
6.3. Battery-less Operation
The inverter can power loads directly from the PV array without a connected battery, offering flexibility in system design.

Figure 8: Illustration of battery-less operation, powering loads directly from solar panels.
6.4. MPPT Efficiency
The built-in MPPT solar charge controller boasts 99.9% efficiency, maximizing your solar power harvest.

Figure 9: Diagram showing 99.9% MPPT efficiency for maximizing solar power.
6.5. Remote Monitoring
With the optional WiFi module, you can monitor your inverter's performance remotely via a mobile application (available for iOS and Android).

Figure 10: Enjoy home solar energy with ease through APP remote monitoring.
7. Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your inverter.
- **Cleaning:** Keep the inverter's exterior clean and free from dust. Use a dry cloth for cleaning.
- **Ventilation:** Ensure the cooling fans and vents are unobstructed. The inverter features an intelligent cooling fan system that adjusts speed based on ambient temperature.
- **Connections:** Periodically check all electrical connections for tightness and signs of corrosion.
- **Anti-Dust Kit:** If installed, regularly clean the anti-dust kit for harsh environments to maintain proper airflow.

Figure 11: The inverter features an intelligent cooling fan that adjusts rotation speed based on ambient temperature.
8. Troubleshooting
The SUMRY Hybrid Solar Inverter is equipped with an intelligent protection system to safeguard itself and connected devices. If an issue occurs, the inverter will typically display an error code or indicator on its LCD screen.
Intelligent Protection System:
The inverter includes 15 intelligent protection modes, such as:
- Overload Protection
- Short Circuit Protection
- Battery Protection (e.g., overcharge, over-discharge)
- Overheating Protection
- Overcurrent Protection
- High/Low Voltage Protection
- Anti-Reverse Protection
- Energy Fallout Protection

Figure 12: The inverter's intelligent protection system offers 15 modes for enhanced safety.
For specific error codes and detailed troubleshooting steps, please refer to the comprehensive troubleshooting section in the full user manual (if available) or contact customer support.
9. User Tips
- **WiFi Module:** If your purchase includes a free WiFi module, please note that it is shipped separately from China. Contact customer service to obtain the tracking number for your WiFi module.
- **Battery-less Operation:** When operating without a battery, ensure your PV array can consistently meet the load demand, especially during fluctuating sunlight conditions.
- **Load Management:** Be mindful of the inverter's rated power (3.6KW or 4KW) and surge power capacity when connecting appliances. Avoid exceeding these limits to prevent overload protection activation.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your seller or the SUMRY customer service department. Keep your purchase receipt and product serial number handy for faster service.