G7 Wireless Gaming Controller User Manual

1. Introduction

Thank you for choosing the G7 Wireless Gaming Controller. This high-performance controller is designed to provide a superior gaming experience across multiple platforms, including PC, Nintendo Switch, iOS, Android, and PlayStation 4. Featuring Hall Effect joysticks and triggers, dual vibration motors, 6-axis motion sensing, and a 1000Hz polling rate, the G7 offers precise control and immersive feedback. Please read this manual carefully to ensure proper setup and optimal use of your new controller.

2. Package Contents

Please check the package for the following items:

• G7 Wireless Gaming Controller
• USB Type-C Cable
• 2.4G Wireless Receiver (if applicable to your model)
• User Manual (this document)

3. Controller Layout

Familiarize yourself with the buttons and features of your G7 controller:

1. Left Joystick: Hall Effect 3D joystick for precise movement.
2. D-pad: Micro-motion cross directional key for agile control.
3. SHARE Button: For sharing content (platform-dependent).
4. TURBO Button: Activates continuous firing for assigned buttons.
5. HOME Button: Powers on/off, accesses system menus, and reconnects.
6. Right Joystick: Hall Effect 3D joystick for precise aiming/camera control.
7. ABXY Buttons: Micro-motion mechanical buttons for fast, crisp input.
8. OPTIONS Button: Accesses in-game menus (platform-dependent).
9. M1 Button (Back Key): Programmable macro button.
10. M2 Button (Back Key): Programmable macro button.
11. L1 Button: Left bumper.
12. L2 Button: Left Hall Effect trigger.
13. R1 Button: Right bumper.
14. R2 Button: Right Hall Effect trigger.
15. Type-C Port: For wired connection and charging.
16. Mode Switch: Selects connection mode (V3/M/X/S/2.4G).

4. Setup & Connection

Before connecting, ensure the mode switch on the back of the controller is set to the appropriate platform.

4.1. Nintendo Switch Connection

• First Connection:
  1. On your Switch, go to "System Settings" > "Controllers and Sensors" > "Pro Controller Wired Communication" and set to "On".
  2. Navigate to "Controllers" > "Change Grip/Order".
  3. Set the controller's mode switch to "S" (Switch mode).
  4. Press and hold the HOME button for 3 seconds until the indicator lights flash quickly.
  5. The controller will automatically pair. Once connected, the corresponding channel indicator will light up.
• Reconnect:
  1. Set the controller's mode switch to "S".
  2. Press the HOME button. The controller will automatically reconnect.

4.2. PC Connection

• Wired Connection:
  1. Set the controller's mode switch to "X" (X-input mode).
  2. Connect the controller to your PC using the provided Type-C cable.
  3. The PC will recognize the controller as an X-input device.
• 2.4G Wireless Connection:
  1. Plug the 2.4G receiver into an available USB port on your PC.
  2. Set the controller's mode switch to "2.4G".
  3. Press and hold the HOME button for 3 seconds until the indicator lights flash quickly.
  4. The controller will automatically pair with the receiver. The corresponding channel indicator will light up upon successful connection.

4.3. Android Connection (Bluetooth)

• Set the controller's mode switch to "M" (MFI mode, typically functions as standard Bluetooth for Android).
• Press and hold the HOME button for 3 seconds until the indicator lights flash quickly.
• On your Android device, go to Bluetooth settings and search for "G7 Controller".
• Select and pair. The corresponding channel indicator will light up.

4.4. iOS Connection (Bluetooth)

• Set the controller's mode switch to "M" (MFI mode).
• Press and hold the HOME button for 3 seconds until the indicator lights flash quickly.
• On your iOS device, go to Bluetooth settings and search for "Xbox Wireless Controller" (or similar MFI name).
• Select and pair. The corresponding channel indicator will light up.

4.5. PS4 Connection

• First Connection:
  1. Connect the controller to your PS4 console using the Type-C cable.
  2. Press the HOME button.
  3. Follow the on-screen instructions to register the controller.
  4. Once registered, you can disconnect the cable for wireless play.
• Reconnect (Wireless):
  1. Set the controller's mode switch to "V3" (PS4 mode).
  2. Press the HOME button. The controller will automatically reconnect.

5. Operating Instructions

5.1. TURBO Function

The TURBO function allows for rapid, continuous input of a button press.

1. Press and hold the TURBO button.
2. While holding TURBO, press the desired action button (A/B/X/Y/L1/R1/L2/R2/D-pad directions).
3. Release both buttons. The selected action button will now have the TURBO function enabled.
4. To cancel the TURBO function for that button, repeat steps 1-3.

5.2. Macro Programming (M1/M2 Back Keys)

The M1 and M2 back keys can be programmed to execute a sequence of button presses.

1. Press and hold the "SET" button (refer to controller diagram for location, usually a small button on the back).
2. While holding "SET", press either M1 or M2. The indicator light will flash slowly.
3. Input the sequence of buttons you wish to program (e.g., A, B, X, Y, D-pad, L1, R1, L2, R2).
4. Press "SET" again to save the macro. The indicator light will stop flashing.
5. To execute the macro, simply press the programmed M1 or M2 button.
6. To clear a macro: Press and hold "SET", then press M1 or M2, then press "SET" again without inputting any buttons.

5.3. Vibration Adjustment

The G7 controller features fine-tuned dual vibration motors for immersive feedback. The intensity of the vibration can typically be adjusted through a combination of buttons (e.g., TURBO + D-pad Up/Down). Refer to the full PDF manual for specific instructions on adjusting vibration levels.

5.4. 6-Axis Motion Sensing

The controller is equipped with 6-axis motion sensing, allowing for intuitive control in games that support tilt and motion inputs. This feature is automatically active when supported by the connected platform (e.g., Nintendo Switch).

6. Battery Information

The G7 controller is equipped with a 600mAh high-capacity battery for extended gameplay.

• Charging: Connect the controller to a power source (e.g., PC USB port, USB wall adapter) using the provided Type-C cable. The indicator lights will show charging status and turn off or change color when fully charged.
• Battery Life: A full charge provides several hours of gameplay, depending on usage and vibration intensity.
• Low Battery Warning: The controller's indicator lights may flash to indicate a low battery level.

7. Specifications

8. Maintenance

• Cleaning: Use a soft, dry cloth to clean the controller. For stubborn dirt, slightly dampen the cloth with water or a mild cleaning solution. Do not use harsh chemicals or abrasive materials.
• Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
• Avoid Impact: Do not drop or subject the controller to strong impacts, as this may damage internal components.
• Cable Care: Handle the Type-C cable carefully. Avoid bending or twisting it excessively.

9. Troubleshooting

9.1. Controller Not Connecting

• Ensure the mode switch on the back of the controller is set to the correct platform (V3 for PS4, M for Android/iOS, X for PC X-input, S for Switch, 2.4G for PC 2.4G wireless).
• Make sure the controller is charged. Connect it via Type-C cable to charge.
• For wireless connections, ensure the controller is in pairing mode (holding HOME button for 3 seconds until lights flash).
• For 2.4G wireless, ensure the receiver is properly plugged into the device.
• For Bluetooth, ensure Bluetooth is enabled on your device and the controller is discoverable.
• Try restarting the host device (PC, Switch, PS4, phone).

9.2. Joystick Drift

• The G7 controller uses Hall Effect joysticks, which are designed to prevent drift. If you experience drift, ensure the controller's firmware is up to date (check the manufacturer's website if available).
• Try recalibrating the joysticks through your device's system settings if an option is available.

9.3. Vibration Not Working

• Ensure the game or application supports vibration feedback.
• Check if vibration is enabled in the game's settings or your device's system settings.
• Verify that the vibration motors are not disabled or set to minimum intensity (refer to the full manual for adjustment instructions).

9.4. Buttons Unresponsive

• Ensure the controller is properly connected and powered on.
• Check if any buttons are stuck or physically obstructed.
• If using TURBO or Macro functions, ensure they are configured correctly or try disabling them to test basic button functionality.

10. Warranty & Support

For warranty information, technical support, or service inquiries, please refer to the seller's policy or contact the retailer where you purchased the product. Keep your proof of purchase for any warranty claims.

A PDF version of the user manual is available for download at: G7 Wireless Controller User Manual (PDF)